10 Steps of Network Designing: A Comprehensive Guide

Article writing 2

10 steps of network designing
Network designing means the planning that helps in the implementation of a computer
network infrastructure. It is performed by the various network designers and the IT
administrators before the implementation of the network infrastructure.
A sustainable and future proof network design can be made with the use of the following
10 steps.
Step 1- Outlining the requirement
The designing of any network can be successful after being aware of the purpose of the
project. The purpose of the creation is required to be transmitted to the people working on the
development of the design.
Step 2- Extraction of the network structure
The information of the structure is required to be extracted as it provides the
administrator with brief of various components, segments and connections between the different
segments of the network (Radosavovic and et.al., 2020).
Step 3- Keeping information of hardware
The information of the hardware is required to be kept during the process of network
designing. Keeping record provides the information on the method or ways that the hardware is
connected and configured within the network. The backup of the information should be kept in
the remote devices so that in the case of any outage in the network the data remains safe and
protected.
Step-4 Label according to the role
The hardware that is used should be labelled according to the role and use of it. The
labelling should be done on the basis of configuration in the network so that it can differentiate
the works of different hardware used. The correct labelling of the hardware requires the
information to differentiate the identical hardware according to its configuration to the network.