ProductsLogo
LogoStudy Documents
LogoAI Grader
LogoAI Answer
LogoAI Code Checker
LogoPlagiarism Checker
LogoAI Paraphraser
LogoAI Quiz
LogoAI Detector
PricingBlogAbout Us
logo

Exploring the Power of 3D Printing Technology: Advantages, Applications, and Ethical Considerations

Verified

Added on  2023/04/25

|8
|702
|476
Presentation
AI Summary
In this ppt slide we will discuss about 3D printing and below are the summaries point:- 3D printing technology enables the layer-by-layer joining of materials controlled by a computer, using liquid molecules or powder grains. It plays a significant role in mechanical engineering and aerospace engineering, providing prototype overviews, customization, and on-demand component production. Strengths include single-step manufacturing, speed, risk mitigation, and design freedom, while weaknesses involve high cost, energy consumption, material limitations, and emission of harmful particles. Ethical issues such as piracy and medical concerns are also present.  

Contribute Materials

Your contribution can guide someone’s learning journey. Share your documents today.
Document Page
3D PRINTING TECHNOLOGY

Secure Best Marks with AI Grader

Need help grading? Try our AI Grader for instant feedback on your assignments.
Document Page
Introduction
3D printing is an emerging technology
through which materials can be joined
under the control of the computer. The
materials those can be used are liquid
molecules or powder grains in layer by
layer.
Document Page
Working principal of 3D printing:
3D printing can be through using the
3D printer connected with the computer
and the system. At first, the 3D printer
turns the whole object into many little
parts. The process is done slice by slice
in bottom up approach.
Document Page
Significance of 3D printing:
3D plays an important role in the field of
mechanical engineering and aerospace engineering. 3D
printing has made the processes included in these
industries easier through providing the overview of the
prototype before the development of the project (Lee,
An and Chua 2017). This printing technology has
helped in mass customization of the products along
with production of on demand components. Apart from
that 3D model developed through 3D printing provides
chances for verification and required correction in the
physical component.

Paraphrase This Document

Need a fresh take? Get an instant paraphrase of this document with our AI Paraphraser
Document Page
Strength:
Single step manufacturing.
Speed
Mitigation of risks
Freedom of designing
Weakness:
Expensive technology
Consumption of high energy
Emission of harmful particles.
Limitation of the materials.
Document Page
Ethical issues:
Piracy
Lack of rules and regulations
Ethical issues in medical field.
Document Page
References
Chia, H.N. and Wu, B.M., 2015. Recent advances in 3D printing of biomaterials. Journal of biological
engineering, 9(1), p.4.
Isaacs, A., Rodriguez, D.G., Cardona, C.S., Marko, C. and Zongying, X., 2016. DETERMINING OPTIMAL
CHARACTERISTICS OF FILAMENT FOR FUSED FILAMENT FABRICATION (FFF) 3D PRINTING TECHNOLOGY.
Lee, J.Y., An, J. and Chua, C.K., 2017. Fundamentals and applications of 3D printing for novel materials. Applied
Materials Today, 7, pp.120-133.
Lee, J.Y., Tan, W.S., An, J., Chua, C.K., Tang, C.Y., Fane, A.G. and Chong, T.H., 2016. The potential to enhance
membrane module design with 3D printing technology. Journal of Membrane Science, 499, pp.480-490.
Loo, A.H., Chua, C.K. and Pumera, M., 2017. DNA biosensing with 3D printing technology. Analyst, 142(2), pp.279-
283.
Mendis, D., Lemley, M. and Rimmer, M., 2019. The future of printcrime: Intellectual property, innovation law, and
3D printing. In 3D Printing and Beyond: The Intellectual Property and Legal Implications Surrounding 3D Printing
and Emerging Technology. Edward Elgar Publishing Limited.
Scholze, M., Singh, A., Lozano, P.F., Ondruschka, B., Ramezani, M., Werner, M. and Hammer, N., 2018. Utilization
of 3D printing technology to facilitate and standardize soft tissue testing. Scientific reports, 8(1), p.11340.
Stansbury, J.W. and Idacavage, M.J., 2016. 3D printing with polymers: Challenges among expanding options and
opportunities. Dental Materials, 32(1), pp.54-64.
Wang, X., Jiang, M., Zhou, Z., Gou, J. and Hui, D., 2017. 3D printing of polymer matrix composites: A review and
prospective. Composites Part B: Engineering, 110, pp.442-458.
Xing, J.F., Zheng, M.L. and Duan, X.M., 2015. Two-photon polymerization microfabrication of hydrogels: an
advanced 3D printing technology for tissue engineering and drug delivery. Chemical Society Reviews, 44(15),
pp.5031-5039.
Zhao, Y., Li, Y., Mao, S., Sun, W. and Yao, R., 2015. The influence of printing parameters on cell survival rate and
printability in microextrusion-based 3D cell printing technology. Biofabrication, 7(4), p.045002.

Secure Best Marks with AI Grader

Need help grading? Try our AI Grader for instant feedback on your assignments.
Document Page
THANK YOU
1 out of 8
[object Object]

Your All-in-One AI-Powered Toolkit for Academic Success.

Available 24*7 on WhatsApp / Email

[object Object]