The server is directly connected

NETWORKING 0
Wireless Network and
Communication

NETWORKING 1
Question 1
The below figure shows the communication among two hosts linked to
different networks:
After evaluating the above diagram it is examined that server transmit
signals from one source to another and communication among server and
workstation can be analyzed using the below steps:
 The server is directly connected with the ATM network where server
transfer signals to the network used in the ATM system.
 ATM network is connected with the router that has the capability to
route the received signals effectively.
 Using IEEE 802 LAN router is connected with the workstation
 The major advantage of 802 LAN is that it provides a larger data rate
that helped to transfer data in less time.

NETWORKING 2
 Therefore, using LAN data can be transmitted from server to
workstation and perform data communication effectively.
 In the TCP/IP model, the physical layer is connected with the ATM
network and the IP network is interconnected with the physical layer
of workstation that performs data transmission among server and
workstation.
Question 2
Part A
Amplitude= 8
Phase= 0 degree
Frequency= 500 Hz
Time period= 1/500 seconds
Part B
Part C