Network Design for Top Network Company

This document describes the network design for Top Network Company, which includes IP addressing plan, LAN topology, LAN protocols, hardware requirements and more. The user-centered design principles are followed for the development of the network design. The local area network is developed for covering the building and connecting each of the workstation such as the servers, computers and the printing device for exchanging files and information between each other.

ICT106 DATA
COMMUNICATIONS
AND NETWORKS
NAME OF THE STUDENT
NAME OF THE UNIVERSITY

INTRODUCTION
• Currently Top Network Company (TNC) had its office in a three storied
building and it has three departments each allocated a separate floor.
There are 84 workstation connected at the Administration department,
170in the marketing floor and 255 in the Sales floor. An IP addressing
plan and a design for the local area network is created after the
identification of the requirement. The user centered design principles
are followed for the development of the network design. Users
connected in different department are provided access to the WEB and
the Email server installed in the DMZ zone of the network.

IP ADDRESSING PLAN
Subnet
Name
Needed Size Allocated
Size
Address Mask Dec Mask Assignable
Range
Broadcast
Administrati
on
85 126 192.168.103.0 /25 255.255.255.1
28
192.168.103.1
-
192.168.103.1
26
192.168.103.1
27
Marketing 170 254 192.168.102.0 /24 255.255.255.0 192.168.102.1
-
192.168.102.2
54
192.168.102.2
55
Sales 255 510 192.168.100.0 /23 255.255.254.0 192.168.100.1
-
192.168.101.2
54
192.168.101.2
55

LOCAL AREA NETWORK DESIGN

NETWORK DESIGN JUSTIFICATION
• The above network diagram is created following the requirement of the organization
and for each of the floors separate switches are used and a central switch is used
which is needed to be configured with VTP server and VLAN with the name of the
department. The configuration of the switch with server helps in transmitting the
VLAN information to the layer 2 switch that are connected with it. The IP address is
subnetted into three subnet such that each of the department have different range
of IP address. The router is also needed to be configured with DHCP pool for
automatically assigning the IP address to each of the VLAN. Redundant link are used
for interconnecting the network device such that the network uptime is increased
and the risk of packer loss, jitter and congestion in the network is eliminated.

LAN TOPOLOGY
• The local area network is developed for covering the building and
connect each of the workstation such as the servers, computers and
the printing device for exchanging files and information between
each other. A hierarchical network design is followed for the
development of the local area network and it is an useful network
design tool for the development of the network infrastructure. The
network is developed with the application of modularity, resiliency
and flexibility such that the abnormal conditions can be handled.

LAN PROTOCOLS
• There are different LAN protocols that works in the different layers of the OSI model. The
specification of the LAN is needed to be identified for the implementation of the networking
protocols and configure the network following the needs of the organization. The protocols are
used for creating a formal policy and standard comprising procedures, formats and rules for
defining the communication between the network devices connected in the Local Area network.
The protocols are used for governing the end to end processes for securing and management
of the data communication. The email servers connected in the network is needed to be
configured with SMTP protocol and the WEB server would be configured with HTTPS
configuration for enabling securely transmitting information between the different departments
of the organisation. There are different network management protocols such as ICMP and SNMP
that are used for troubleshooting the errors in the configuration in the network.

HARDWARE REQUIREMENT
Name of the device Features and Ports Justification
Cisco 2811 Series integrated
service router
Embedded Ga or Fa port,
AUX port and
Console Port
It is selected since it is suitable for small and medium sized
business and provides support for different concurrent
service such as voice and security. Its density can be
increased with the addition of high speed WAN interface
card slots.
Cisco Catalyst WS-C2950S 24 Fa ports
Support of VLAN
This selected since it supports VLAN configuration and
suitable for the small and mid-sized offices for selecting the
right combination of protocols for the network edge. It can
be configured for voice and data service and additional
security configuration can be added for enabling security
filtering and increasing the efficiency of the network.
Cisco WS-C3550-XL-EN 3500 24 Fa port
2 ga port
Support of VLAN
It is used for increasing the availability of the network and
improve the quality of service for enhancing the different
network operations.

CONCLUSION
• The network solution for Top Network Company is developed following the requirement of
the organization and dividing the network based on number of user per each department.
The local area network is developed after a detailed analysis of the building floor plan and
analysing the users who are provided the permission for accessing the servers. The local
area network of the organization is created after analysis of the user needs and
identification of the network device that can be used for serving the needs of the user. For
the development of the local area network design solution for TNC a preliminary design of
the network is created and an IP addressing scheme is developed following the
requirement of number of workstation needed to be connected to each of the subnet. A
research is done on the local area network topology and protocol for the development of
the network. The hardware that are essential for the development of the network should
be identified and justification for the choice of hardware is given in the network.

BIBLIOGRAPHY
• [1]. Archana, C. "Analysis of RIPv2, OSPF, EIGRP Configuration on router Using CISCO Packet tracer."
International Journal of Engineering Science and Innovative Technology (IJESIT) Volume 4, 2015.
• [2]. Baek, Sun Uk, Hyun Ho Shin, and Dong-Ryoel Shin. "Consideration of Multipath Routing over
SDN-enabled Network." The International Conference on Innovations in Intelligent Systems and
Computing Technologies (ICIISCT2016)., 2016.
• [3]. de Leon, Daniel Conte, et al. "High-level and formal router policy verification." Journal of
Computing Sciences in Colleges33.1, 2017: 118-128.
• [4]. Karakus, Murat, and Arjan Durresi. "A survey: Control plane scalability issues and approaches in
software-defined networking (SDN)." Computer Networks 112, 2017: 279-293.
• [5]. Kasi, Abid Ahmed, et al. "Performance analysis of homogenous and heterogenous network core
switches." Wireless Systems and Networks (ISWSN), 2017 International Symposium on. IEEE, 2017.