IT Networking and Communication Assignment 2

Running head: IT NETWORKING AND COMMUNICATION
IT Networking and Communication
Assignment 2
Name of the Student
Name of the University
Author’s Note

1
IT NETWORKING AND COMMUNICATION
Answer to Question 1:
For classful addressing the IP address is divided with the network ID and Host ID,
e.g. For Class A the first octet is the network ID and the last three octet are the host ID. The
classless addressing allows the use of variable length subnet mask and different subnet mask
can be used for the same network. E.g. RIPv2 and BGP.
Answer to Question 2:
The class A address block are larger for any of the organization and thus it cause
wastage of IP address. Whereas the block of class C addresses are too small for the
organization and thus they does not want it.
Answer to Question 3:
In IPv4 addressing mask is a 32 to 128 bit number that is used for segmenting the Ip
address and dividing it into discrete host and network addresses.
Answer to Question 4:
The first address is the network address for the block of addresses. If one of the
addresses in the block is unknown the mask can be ANDed for finding it.
Answer to Question 5:
Subnetting is a process of dividing the host portion of IP address into more subnets
for routing the data traffic in the larger subnet. Subnet mask differs from the default mask
because there are more consecutive 1s in subnet mask and there is less consecutive 1s than
the corresponding default mask.
Answer to Question 6:

2
IT NETWORKING AND COMMUNICATION
NAT is a method used for remapping an address space with the modification of
network address information contained in IP header while transiting across the network
device.
This can helps in providing a solution for address depletion because one IP address can be
used as a Nat gateway for using it as a private network.
Answer to Question 7:
Connection oriented service – Authentication of destination node is needed for
transferring data. It is more reliable because a virtual connection is established before sending
the packet.
Connectionless Service – It is used for transferring data without authenticating the
destination. It does not ensures the reliability of data packet.
Answer to Question 8:
Fragmentation refers to division of files into multiple pieces and it is needed for
storing or sending files in the network in contiguous parts.
Answer to Question 9:
Transition strategies to move from Ipv4 to Ipv6 is dual stacking, tunnelling and
translation.
In dual stacking the router is configured with both Ipv4 and IPv6 address for enabling
communication with Ipv4 and Ipv6 networks. The tunnelling mechanism is used for
encapsulating the Ipv4 data packets and transmitting it over the network.
Answer to Question 10:
Some common address mapping protocols are: