Ask a question from expert

Ask now

CPCCBC4001A Assessment Answers: Apply Building Codes for Construction Low Rise Buildings

5 Pages796 Words146 Views
   

Apply building codes and standards to the construction process (CPCCBC4001A)

   

Added on  2021-09-13

CPCCBC4001A Assessment Answers: Apply Building Codes for Construction Low Rise Buildings

   

Apply building codes and standards to the construction process (CPCCBC4001A)

   Added on 2021-09-13

BookmarkShareRelated Documents
Apply Building Codes for Construction Low Rise Buildings 1
Apply Building Codes for Construction Low Rise Buildings
by Student’s Name
Code + Course Name
Professor’s Name
University Name
City, State
Date
CPCCBC4001A Assessment Answers: Apply Building Codes for Construction Low Rise Buildings_1
Apply Building Codes for Construction Low Rise Buildings 2
Apply Building Codes for Construction Low Rise Buildings
Is it a requirement to install emergency lighting in the following (explain your answers):
Every fire-isolated passageway?
It is essential also to install the emergency lighting in all the fire-isolated passageway in the
building. However, they must be having an overall length of at least 6m in line with the entrance.
The consideration must be taken in line the class 2, 3building as well as the class 4 in the long
run.
Rooms where there is public access in Class 6 or 9B
It is fundamental to have the lighting system for the emergency services in line with public
access in due course. The correlation mainly outlined as per the design considerations in the
building codes of Australia.
The building, which has a floor area over 300 m2?
According to the Building Codes of the Australian standards, it is not only essential but also
essential to install the emergency lights in the floors raised at a tune of more than 300m2. In
essence, there are two standards which outline the regulations regarding the norm. The norm
incorporates the sole occupancy and the multiple users. The installation for the sole occupancy
described in class 5, 6 and 9 whereas in the storey building classifications the set regulations
mainly stipulated as per the class 6 and 9b of the building codes of Australia (Shou, Wang,
Wang, and Chong 2015 p.291).
2. Which sections of the BCA need to be checked where a building solution is proposed to
comply with the Deemed to Satisfy provisions? Explain why.
CPCCBC4001A Assessment Answers: Apply Building Codes for Construction Low Rise Buildings_2

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
ENS5112 Construction Site Management
|6
|937
|68

Active Fire Control and Access in Construction Management
|6
|1100
|410

Emergency Lighting System for Fire Safety in Sustainable Buildings
|12
|3030
|313

(BCA) Building Code of Australia | NCC 2019 Volume one, two, three
|6
|1861
|469