logo

The interface of the router configuration mode

5 Pages663 Words237 Views
   

Added on  2020-04-13

About This Document

The command for the abbreviation is int fa0/1 which is used in accessing the fast Ethernet 0/1 interface (Bttcher, 2013). The step to follow next is for one to enter the IP address which is assigned to the Fast Ethernet 0/1, iP address 10.10.20.50 and the subnet mask 255.255.0.0 and then press the enter. Question 2: The command exhibits the controllers’ serial which has interface number could be utilized in deciding whether or not your serial interface

The interface of the router configuration mode

   Added on 2020-04-13

ShareRelated Documents
Running head: NETWORK MANAGEMENT1Network managementName:Institution Affiliation:
The interface of the router configuration mode_1
NETWORK MANAGEMENT2Question 1. 1.When it comes to the configuration of the routers mode (Router (config) #), one should enter interface fa0/1 and then press the enter key. This will change the prompt of the router to Router (config-if)#, which will indicate one is in the interface of the router configuration mode. The router is able to keep track of the interface they are configuring. The command for the abbreviation is int fa0/1 which is used in accessing the fast Ethernet 0/1 interface (Böttcher, 2013). The prompt of the router will still display Router (config-if)#.2.2. The step to follow next is for one to enter the IP address which is assigned to the Fast Ethernet 0/1, iP address 10.10.20.50 and the subnet mask 255.255.0.0 and then press the enter.3.The next step is to enable the router interface through use of the no of shutdown (no shut)command.Question 2:1.The command exhibits the controllers’ serial which has interface number could be utilized in deciding whether or not your serial interface is the DCE or perhaps the interface (Böttcher, 2013). This command could be utilized once they have an RJ-45 connection. 2.The V35 cables usually are labeled in indicating whether these are DTE or perhaps the DCE cable. 3. It may also be carried out by way of check the end of the V35 cable to ascertain whether it really is male- DTE or even female- DCE (Kim & Feamster, 2013).
The interface of the router configuration mode_2

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
Assignment on Network Management in Organization
|4
|440
|50

Report on Network Management
|7
|1150
|257

Network Security Management
|7
|983
|261

Tcp/IP Networking Assignment PDF
|16
|1018
|104

The Basic Networking Design Project
|17
|1419
|171

Tcp/IP Networking Assignment PDF
|16
|1080
|114