logo

Automatic Position Reporting System: Project

10 Pages1660 Words101 Views
   

Added on  2020-03-28

Automatic Position Reporting System: Project

   Added on 2020-03-28

ShareRelated Documents
CompetencyDemonstration Report(CDR) Career Episode 1
Automatic Position Reporting System: Project_1
CE 1.1: Project IntroductionName of the Project:Developing Low Cost Design of Receiver for RadioDetectionGeographical Location: [Please Fill]Project Duration: [Please Fill]Organization: [Please Fill]Position in the Project : Team MemberCE 1.2: Project BackgroundCE 1.2.1: Characteristics of the ProjectThe technology for RFD (Radio Detection Finding) is widely used as emergency servicesby various rescue team and search parties. The application of the RDF helps in locating thedisaster victims, and emergency personnel with the use of the radio signals. The RFD availablein the markets are not widely used in the search parties due to high cost and complexity in use. Inaddition to that, I have found that available radio detection system are highly complicated andexpensive and requires extensive training for the users. Therefore, in this project I have workedfor developing a low cost and complex RDF system for regular usage. I have studies andevaluated various technologies that are low cost and can be replaced with existing technologiesfor providing low cost equipments. In this project, I have focused on implementing the criteriaPage 1 of 11
Automatic Position Reporting System: Project_2
and technology for APRS (Automatic Position Reporting System) for integrating the telemetry,messaging and positioning techniques. CE 1.2.2: Objectives developed for projectIn this project, I have made my significant aim to provide an easy deployable and lowcost radio direction detection system that can be commercially used in wide range. Thedeveloped system would allow the firefighters and other rescue teams to easily search for thepersons in real time with greater efficiency. In addition to that, in order to effectively manageand complete the system design within allocated time, I have formulated the below mentionedobjectives:To evaluate the working principle for radio frequency detection system;To propose an easy to implement and low cost architecture for radio frequencydetection receiver;To develop the appropriate receiver using pseudo-doppler;To conduct the operational and functionality testing for the developed prototypemodel;To validate the transmitter characterization and the power supply to the developedprototype;CE 1.2.3: My area of work For the implementation of the prototype model for radio frequency detector, I haveworked with the theoretical experience as telecom engineer. Before staring the hardwareimplementation and defining the specification for the prototype model, I have studies the existingtechnologies that are being used in the RFID applications. Based on the identified functionalityPage 2 of 11
Automatic Position Reporting System: Project_3

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
Developing Low Cost Design Of Receiver for Radio Detection
|8
|1664
|50

Competency Demonstration Report (CDR) | Report
|8
|1647
|68

Competency Demonstration Report (CDR) - doc
|9
|1651
|429

Design and Fabrication of Smoke Detector Alarm - Project Information and Background
|6
|1639
|97

Implement of Gas Leakage Detector and Auto Dialing Control System | Project
|10
|1835
|149

(CDR) Competency Demonstration Report - Assignment
|8
|1680
|33