logo

Project Information Assignment PDF

9 Pages1733 Words57 Views
   

Added on  2021-06-18

Project Information Assignment PDF

   Added on 2021-06-18

ShareRelated Documents
CE 2.1 Project InformationName of the project: GPS Microstrip AntennaLocation of the project: La Trobe University, Melbourne AustraliaProject Duration: Please fillOrganization: La Trobe University, Melbourne AustraliaRole and Designation during the time: Team Member of the projectCE 2.2 Project BackgroundCE 2.2.1 Characteristics of the projectThis project of GPS Microstrip Antenna was my first mini project in engineeringcareer. The microstrip antenna was made eventually for the purpose of receiving andtransmitting electromagnetic waves. In this project, we had designed as well as tested amicrostrip antenna that is extremely useful for the particular GPS system application byutilizing separate software and hardware. In the beginning, we had to analyze a primaryestimation for our project with the help of Antenna Magus. Finally, the software selected byus in this project was Feko. After this, the design was tested where the result of thespecification was compared to the design. The monitored frequency from network analyzerwas 1.5825668 GHz. The patch antenna used was Rectangular edge-fed patch antenna whichhas maximum radiation in the direction normal to the plane of patch of antenna. The antennaused was easy to fabricate and is reliable in comparison to other patch antennas. CE 2.2.2 Objectives developed for the project
Project Information Assignment PDF_1
The project of Design of a Double Pipe Heat Exchanger comprises of two importantobjectives. The objectives are as follows:To select an appropriate antenna which can receive signal for GSM systemTo be familiar with different type of software like Antenna Magus, FEKO, ALTIUMTo test the designed antenna in different environment and compare the resultTo observe the VSWR of the signal using spectrum analyzer To connect the antenna and observe its different propertiesTo observe the actual outcomes of the project and compare it with expected outcomeCE 2.2.3 My area of workThis project of GPS Microstrip Antenna was executed properly. Being thetelecommunications engineer, my major area of work was to design the antenna. I made surethat the design of the project was made perfectly. Moreover, I even had to test the designedantenna for proper comparison of results. My other area of work in the project was to arrangefor various meetings and gatherings of the project. I did this at the end of every week forunderstanding whether the project would be successful or not or whether we are laggingbehind.CE 2.2.4 Project Group
Project Information Assignment PDF_2
Head of DepartmentProject Leader Team MemberTeam MemberTeam MemberMEFigure 1: People involved in the projectCE 2.2.5 My responsibilities throughout the projectI was an important part of the project. I had various important responsibilities withinthe project. My first and the foremost responsibility in this project of GPS MicrostripAntenna was to design the microstrip perfectly. I knew that if the project design was madeperfectly, the project is bound to be a success. My next responsibility was to assist my projectsupervisor in the project. The other significant responsibility in this project was to test thedesigned antenna. Another important responsibility that I had to execute in this project wasproviding guidance to my juniors. I even applied my knowledge and skills within the projectfor successfully completing the project. CE 2.3 Distinctive ActivityCE 2.3.1 Engineering knowledge and skills applied in the project
Project Information Assignment PDF_3

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
Design and Fabrication of Square Ring Microstrip Patch Antenna for RADAR
|9
|1695
|99

Design and Analysis of Three Concentric Half Ring Microstrip Patch Antenna
|9
|1748
|99

Professional Engineering: Summary Statement
|7
|1136
|193

Microstrip Patch Antenna Bandwidth Improvement by Using Foam Substrate
|12
|2051
|271

Summary Statement for Professional Engineering Competency Element PE 1
|8
|1221
|338

Competency Demonstration Report : Design of Dual Polarized Microstrip Patch Antenna
|8
|1664
|113