COIT20261 Network Routing and Switching (Term 1, 2018) Assignment
Added on 2020-05-16
6 Pages1577 Words282 Views
COIT20261 Network Routing and Switching (Term 1, 2018)Assignment item —Written Assessment-1Due date:11:45pm AEST, Friday, Week 6ASSESSMENTWeighting:15%1ObjectivesThis assessment task requires you to demonstrate your knowledge of basic routing concepts by completing a number of exercise questions. The questionscontain numerical as well as descriptive questions covering the material up to Week 6.The questions are designed to help you to achieve the unit learning outcomes as listed in the unit profile.InstructionsYou must do this assignment on your own – it is not a group assignment.Type all your answers in the ‘Template for Your Answers’ Section of this document and upload only that template. You could do that by copying the Template section into a new Word document for uploading. Answers that are not typed into the “Template for Your Answers” section may not be marked, or may be returned to you for re-typing and re-submission – late penalties will apply.Where instructed, you must show the steps you took to arrive at your answers. Write your answers in your own words to avoid potential plagiarism and copyright violations. You must submit the Answer section as a Word file (.doc or .docx). Do not submit PDF’s or any other type of file without express permission from the Unit Coordinator.Plagiarism Procedures can be found in the CQUniversity Policies section of the Unit Profile.Assessment Requirements and Marking CriteriaThere are 3 main questions with some sub-questions and the requirements are stated for each one. You must answer all questions and their sub-questions. Marks are indicated in the Answer Template.The questions will be marked on correctness, logic and clarity, and addressing all parts of the question.The Assignment Questions begin on the next page.USE THE PROVIDED TEMPLATE ON P.4 FOR ALL YOUR ANSWERS.
COIT20261 Network Routing and Switching (Term 1, 2018)Assignment item —Written Assessment-1Question 1 – Address usage(3 marks)Consider the following classless address block:154.78.177.3/27List the addresses from this block that would be used as:a)the network address, b)the direct broadcast address, andc)the range available for hosts to useShow the steps you took to arrive at your answers.Question 2– Allocating subnets from a block (8 marks) A company has been granted a block of addresses which includes the address 138.77.216.5/24. Answer the following questions, showing your calculations.a)Calculate the network address of this block and how many host addresses including special addresses this block can provide (1 mark)b)Create the following 6 subnets for this company by calculating the subnet address for each subnet. Answer this question by filling in the table in the Answer template. Use CIDR format for the mask.I.2 subnets with 32 addresses each (2 marks)II.4 subnets with 16 addresses each (4 marks)c)After some time, the company decides that it wants another subnet with 1,024addresses. Explain whether this can be allocated from the existing block. (1 mark)Question 3 – Network Tools (Windows)(4 marks)Often the best way to gain an initial familiarity with network tools is to simply use them, at a basic level in exploratory mode as suggested in some of the tutorial exercises. Netstat and Tracert are included in Windows, while Wireshark is free to download and install. Explore Wireshark, Netstat and Tracert, then complete this question.a)A wireshark scan has produced a packet capture, saved to a file named wireshark_capture01.pcapng and available on the Unit website. Download the file and open it in Wireshark, then answer these questions about the scan:i.Very briefly summarise in your own words the content in each of the three horizontal display windows in Wireshark (.5 mark)ii.In Frame 3, what brand of computer launched this scan and what was its IP address? State where this information is found (.5 mark)iii.Briefly explain the exchange event captured in frames 4 - 6 (.5 mark)
COIT20261 Network Routing and Switching (Term 1, 2018)Assignment item —Written Assessment-1iv.Describe in your own words two specific network problems that a network administrator could use Wireshark for as a troubleshooting tool? (.5 mark)b)A ‘NETSTAT –aon’ command has given the output below (excerpted). Briefly describe each column heading, and the states LISTENING, ESTABLISHED and CLOSE_WAIT. (1 mark)Active ConnectionsProtoLocal Address Foreign Address State PIDTCP 10.0.0.58:139 0.0.0.0:0 LISTENING TCP 10.0.0.58:5040 0.0.0.0:0 LISTENING 7480TCP 10.0.0.118:139 0.0.0.0:0 LISTENING 4TCP 10.0.0.118:52450 52.63.165.133:443 ESTABLISHED 14080TCP 10.0.0.118:52458 104.116.191.195:443 CLOSE_WAIT 8912TCP 10.0.0.118:52791 40.100.151.2:443 ESTABLISHED 22400TCP 10.0.0.118:52811 162.125.34.129:443 ESTABLISHED 4696TCP 10.0.0.118:52820 34.232.224.128:443 CLOSE_WAIT 4696TCP 10.0.0.118:52879 162.125.34.129:443 ESTABLISHED 4696...c)Do a TRACERT on your computer to www.google.com. Paste the output to your assignment answer template and discuss the information being displayed (1 mark)
End of preview
Want to access all the pages? Upload your documents or become a member.
Related Documents
COIT20261 Network Routing and Switchinglg...
|7
|1712
|67
COIT20261 Network Routing and Switching Assignmentlg...
|10
|2370
|91
COIT20261 Network Routing and Switching | Assignmentlg...
|7
|1691
|152
COIT20261 : Network Routing and Switchinglg...
|7
|1850
|49
COIT20261 Network Routing and Switching Assignment 1lg...
|5
|1409
|198
COIT20261 Network Routing and Switching Assignment 1lg...
|6
|1573
|136