Computer Networking | Assignment-2

Course Code Name:
Student Name and ID:
Lecturer Name:
Submission Date:

Task 1 - Setting up a Network
Network Topology
Configure the PCs, Server and Router interfaces with appropriate network
addressing
Router 0 IP Addressing
Router 1 IP Addressing

PC 0 IP Addressing
Server 0 IP addressing

Configure any classless dynamic routing protocol on the routers
Routing refers to the redirection of data packets from a source to a destination.
Routing can either be dynamic or static. In static routing, a network specialist is
required to configure every route on a router manually. This is tedious since the
network administrator is required to master every route that packets have to follow.
Where the network is large it becomes a challenge. In dynamic routing, a routing
protocol is configured o a router and the protocol will aid the router in the routing
process. Sample routing protocols include and are not limited to OSPF, RIP, EIGRP,
BGP IS-IS etc. In our routing process, we will make use of OSPF dynamic routing
protocol. The configuration is as below;
Router 0
router ospf 2
network 192.168.17.0 0.0.0.3 area 2
network 192.168.16.0 0.0.0.255 area 2
end
copy run star