Engineering Project Report and Assessment

This assignment presents a detailed report of an engineering project focused on RFID technology and telecommunication network simulation. It showcases the candidate's skills in oral and written communication, creative problem-solving, information management, and teamwork. The report is structured around specific career episodes (CEs) demonstrating the application of these competencies in various stages of the project.

Professional Engineering: Summary Statement
Competency Element
A brief summary of how you
have applied the element
Paragraph number in the
career episode(s) where the
element is addressed
PE 1 KNOWLEDGE AND SKILL BASE
PE1.1 Comprehensive,
theory based
understanding of the
underpinning natural and
physical sciences and the
engineering fundamentals
applicable to the
engineering discipline.
1. The project was based on
deesign of RFID tag antenna
matched to micro chip.
2. I had conducted this study
on cooperative MIMO
communications over the
wireless networks.
3. I had conducted this project
study to implement a data
logging system which provides
flexibility, customization and
combination to WSN.
Career Episode 1: CE 1.2.3,
CE 1.3.1 and CE 1.3.2
Career Episode 2: CE 2.3.1
and CE 2.3.3
Career Episode 3: CE 3.2.1,
CE 3.3.1 and CE 3.3.2
PE1.2 Conceptual 1. RFID system is discussed to Career Episode 1: CE 1.3.1

understanding of the
mathematics, numerical
analysis, statistics, and
computer and
information sciences
which underpin the
engineering discipline.
analyze the impact of the
parameters of antenna on the
system’s performance.
2. It explores of energy
efficient wireless
communication schemes
among various sensors by
exploiting of MIMO
configurations.
3. I had considered some of the
data such as voltage,
temperature, flow, current,
power, pressure and resistance.
Career Episode 2: CE 2.3.2,
CE 2.3.3 and CE 2.3.4
Career Episode 3: CE 3.3.1
PE1.3 In-depth
understanding of
specialist bodies of
knowledge within the
engineering discipline
1. I had assumed that RF
energy by the tag is re-radiated
into the space. I had then
calculated the power received
by the tag by power
transmitted by the reader.
2. I had conducted this project
study in wireless sensor
network (WSN) to focus on
Career Episode 1: CE 1.3.1
Career Episode 2: CE 2.3.1,
CE 2.3.4, CE 2.2.5 and CE
2.4.2

improvement over the energy
conservation protocols.
3. I had controlled entire sensor
network with no retrieve of the
sensors once it is installed. Career Episode 3: CE 3.3.1,
CE 3.3.3
PE1.4 Discernment of
knowledge development
and research directions
within the engineering
discipline
1. I had maintained the stations
of higher power broadcast
transmitter as well as
associated systems.
2. I had utilized the knowledge
of telecommunication
engineering to determine the
parameters used to analyze
efficiency of MIMO based
MAC protocol over WSN.
3. I had knowledge to process
the data and the information
which are extracted from it.
The data are used in future for
further reference as well as for
Career Episode 1: CE 1.2.5,
CE 1.3.1 and CE 1.4.2
Career Episode 2: CE 2.3.2,
CE 2.3.4 and CE 2.4.1
Career Episode 3: CE 3.3.2,
CE 3.3.3 and CE 3.4.1

analysis.
PE1.5 Knowledge of
contextual factors
impacting the engineering
discipline.
1. I had developed the antenna
to gain theoretical importance
and realistic value of RFID
system. I had used of RFID
technology for conducting the
project work which uses of
radio waves to transmit
information stored concerning
the identified commands.
2. I had monitored the flow of
data and extracted significant
data from the raw data. I had
extracted the environmental
data and exported it whenever
required.
Career Episode 1: CE 1.2.1,
CE 1.2.2 and Career Episode
2: CE 2.2.1, CE 2.2.2
Career Episode 3: CE 3.2.1,
CE 3.2.2
PE1.6 Understanding of
the scope, principles,
norms, accountabilities
and bounds of
contemporary
engineering practice in
1. I had analyzed that the tag
antenna transmits wave
carrying of information which
are stored into the tag, but it
also requires catching wave
from the reader to provide of
Career Episode 1: CE 1.2.3,
CE 1.3.1, CE 1.3.4 and CE
1.3.2

the specific discipline
energy for the tag operations.
2. I had involved into
development of MAC protocol
and my main area of working
is to develop mathematical
model to work out with
competence of proposed MAC
protocol.
Career Episode 2: CE 2.2.3,
CE 2.3.1 and CE 2.3.2 and
Career Episode 3: CE 3.2.3,
CE 3.3.1 and CE 3.3.2
PE 2 ENGINEERING APPLICATION ABILITY
PE2.1 Application of
established engineering
methods to complex
engineering problem
solving
1. I had communicated
with the hardware teams to
provide design concepts of
the system properly.
Career Episode 1: CE 1.2.4, CE
1.3.1 and CE 1.4.2 and Career
Episode 2: CE 2.3.3, CE 2.3.4 and
CE 2.4.1, CE 2.4.2 and Career
Episode 3: CE 3.3.1, CE 3.3.2 and
CE 3.4.2
PE2.2 Fluent application
of engineering techniques,
tools and resources.
1. I had designed a dipole
antenna which is
surrounded by rectangular
loop.
2. I had conducted a
performance analysis for
cooperative MIMO system
Career Episode 1: CE 1.3.3, CE
1.3.2 and CE 1.3.1
Career Episode 2: CE 2.3.1, CE
2.3.2 and CE 2.3.3 and Career
Episode 3: CE 3.3.1, CE 3.3.2 and

to determine timing error
and performance error
modeling.
CE 3.3.3
PE2.3 Application of
systematic engineering
synthesis and design
processes.
I have knowledge to do
simulation of the project
results and use of CAD
techniques.
Career Episode 1: CE 1.2.3, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.3.3 and
CE 2.3.4
Career Episode 3: CE 3.2.2
PE2.4 Application of
systematic approaches to
the conduct and
management of
engineering projects
1. I have knowledge to
understand hardware
design of antenna, its
radiation and effect of the
interference frequencies
which prevent optimum
performance with
equipments are developed.
2. I had to develop
mathematical model such
as error performance and
time error modeling to
measure efficiency of the
proposed protocol,
Career Episode 1: CE 1.3.1 and
CE 1.3.2
Career Episode 2: CE 2.2.3, CE
2.3.1, CE 2.3.2 and CE 2.3.3

therefore I had used my
computational skills in this
area.
3. I had protected the data
from any type of
unauthorized access by
third party person. I had
also used of MATLAB for
conducting of WSN test
bed.
Career Episode 3: CE 3.3.1 and
CE 3.3.2
PE 3 PROFESSIONAL AND PERSONAL ATTRIBUTES
PE3.1 Ethical conduct
and professional
Accountability
I had conducted study to
implement of different data
acquisition and also data
logging techniques, current
data trending and setting of
various security levels.
Career Episode 1: CE 1.2.3, CE
1.3.3 and CE 1.4.1
Career Episode 2: CE 2.2.3, CE
2.3.5 and CE 2.4.2
Career Episode 3: CE 3.3.3, CE
3.4
PE3.2 Effective oral and
written communication in
professional and lay
domains
1. I had conducted a
development of RFID
technology by doing
practical applications to
impel advancement of
Career Episode 1: CE 1.2.3, CE
1.3.3 and CE 1.4.1

antenna within the RFID
system.
2. I had demonstrated my
telecommunication
network understanding
related to simulation of the
mathematical models in
MATLAB to interpret the
project outcomes.
3. I had involved into the
project study by analyzing
the data logging
applications involved to
acquire as well as record of
the signals.
Career Episode 2: CE 2.2.3, CE
2.3.5 and CE 2.4.2
Career Episode 3: CE 3.3.3, CE
3.4
PE3.3 Creative,
innovative and pro-active
demeanor
Within time, I had
prepared the project report
and send it to the project
supervisor for further
review.
Career Episode 1: CE 1.3, CE 1.4
and CE 1.4.2 and Career Episode
2: CE 2.3, CE 2.4, CE 2.2.5 and
CE 2.4.2 and Career Episode 3:
CE 3.2, CE 3.3
PE3.4 Professional use
and management of
I had sent the draft of the
project report to the project
Career Episode 1: CE 1.2.3, CE
1.2.5, CE 1.4.2 and Career

information
supervisor so that I can get
the feedback so that on
time I can able to conduct
any type of changes.
Episode 2: CE 2.2.3, CE 2.2.5, CE
2.4.2 and Career Episode 3: CE
3.2.3, CE 3.2.5, CE 3.4.2
PE3.5 Orderly
management of self and
professional conduct
I had developed
mathematical model for
performance analysis.
Career Episode 1: CE 1.4.2, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.4.2, CE
2.3.2, CE 2.3.3 and CE 2.3.4 and
Career Episode 3: CE 3.4.2, CE
3.3.1 and CE 3.3.2
PE3.6 Effective team
membership and team
leadership
I had documented the
entire project report to get
feedback from the project
supervisors.
Communication plan is
prepared to conduct
weekly meetings to discuss
the project related issues.
Career Episode 1: CE 1.4.1, CE
1.4.2,
Career Episode 2: CE 2.4.1 and
CE 2.4.2
Career Episode 3: CE 3.4.1 and
CE 3.4.2