Design and Fabrication of PV Solar Rooftop Power Generation System

CE 1.1 Project Information
Name of the project: Design and Fabrication of PV Solar rooftop power generation
system
Location of the project: Please fill
Project Duration: Please fill
Organization: Please fill
Role and Designation during the time: Team Member of the project
CE 1.2 Project Background
CE 1.2.1 Characteristics of the project
The project of Design and Fabrication of PV Solar Rooftop Power Generation
System was the first important and significant project in my engineering career. This particular
project has helped me in understanding the entire concept of photo voltaic rooftop power
generation properly and hence the entire project became successful. Sunlight is being converted
into electricity, when this sunlight falls on the modules of SPV or solar photovoltaic. Each and
every system or device is eventually made for several applications, which are created on the
basis of the modules of SPV. All of these devices are subsequently designed for working in a
specific off grid mode. This grid is supported with various batteries for enabling to utilize when
the sunlight is lower or null. The available rooftop over the buildings could even be utilized to
set up over the ground surface. This project has focused on the designing of power generation
system that is present over the roof of a building for reducing the exploitation of solar energy.

CE 1.2.2 Objectives developed for the project
The project of Design and Fabrication of PV Solar Rooftop Power Generation System
had several significant objectives. The most important objectives of this specific project are as
follows:
 To design and fabricate PV solar rooftop power generation system
 To reduce the exploitation of the solar energy.
CE 1.2.3 My area of work
My major area of work was to design the solar power generation system that was the
most important point in this project. I knew it very well that if the design is not made properly;
the entire project is bound to become a failure. Hence, I made the design perfectly. I even took
assistance from my project supervisor in understanding the project. In the beginning, I had some
doubts; however with the help of my project supervisor and other team members, I was
successful in removing all my doubts, thus becoming successful in making the project design
perfectly.

CE 1.2.4 Project Group
Figure 1: People involved in the project
CE 1.2.5 My responsibilities throughout the project
I had various significant and important roles and responsibilities throughput the project. I
made sure that I executed them perfectly and with utmost sincerity. The first responsibility that
was given to me by my project leader was to choose a specific topic for this project. I had
various doubts regarding the topic of our project. However, after several brainstorming sessions
and discussions with all of my team members as well as project leader, I gave the idea to execute
the project of Design and Fabrication of PV Solar Rooftop Power Generation System. Since, I
had the idea of photovoltaic solar; I had the confidence to execute this particular project
perfectly. My next responsibility was to study the research papers about photovoltaic power
generation system and obtain accurate knowledge for getting involved in this project. I even
prepared the lists of every type of raw material that was needed in this project and made sure that