Monitoring Facility Systems Project

This assignment focuses on the design of a facility monitoring system. It involves implementing various sensors (RF, IR, DC motor, metal sensors), memory, siren, switches, and a motor driver. The system utilizes MCCS for GSM network detection to send location-based notifications. Bluetooth acts as the communication medium between devices. The assignment also emphasizes teamwork, with contributions to signal receiver/transmitter implementation, memory allocation, and voltage regulation.

SUMMARY STATEMENT
NAME

Professional Engineering: Summary Statement
Competency Element A brief summary of how you
have applied the element
Paragraph number in the
career episode(s) where the
element is addressed
PE 1 KNOWLEDGE AND SKILL BASE
PE1.1 Comprehensive,
theory based
understanding of the
underpinning natural and
physical sciences and the
engineering fundamentals
applicable to the
engineering discipline.
I) I have implemented various
components such as Siren,
switches, RF reader and RF
card, Memory (24C04), RF
receiver and RF transmitter, IR
receiver and IR transmitter
including VB and Embedded C
software
II) I had embedded the MCCS in
manner to offer advance feature
in manner to push notifications
whenever, intrusion had been
detected and activate the alarm
of the car and disarm or arm the
vehicle if the intrusion is
Career Episode 1: CE 1.2.1, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.3.1 and
CE 2.3.3

responded by the user as a threat
III) I have embedded Bluetooth
control in the system to operate
the wireless camera that can be
helpful in transmitting and
receiving the signal at short
range in serial format
Career Episode 3: CE 3.2.1, CE
3.3.1 and CE 3.3.2
PE1.2 Conceptual
understanding of the
mathematics, numerical
analysis, statistics, and
computer and information
sciences which underpin
the engineering discipline.
I) I have designed the circuit in
manner that if the obstacle is
found in the path, IR sensor will
not be receiving signal and thus
it will send signal to the robot
and thus robot will reach to the
obstacle and check whether the
obstacle is removed or not
II) I had chosen MCCS
hardware system and firmware
in manner to allow the users to
control the alarm system
through remote transmitter and
user will be able to disarm or
arm as per the nature of the
threat.
Career Episode 1: CE 1.3.1
Career Episode 2: CE 2.3.2, CE
2.3.3 and CE 2.3.4

III) I have integrated the
receiver within the computer
that implies this navigation and
control
Career Episode 3: CE 3.3.2
PE1.3 In-depth
understanding of specialist
bodies of knowledge within
the engineering discipline
I) I had applied the engineering
skills gathered during my
graduation and implemented
those skills within the project
II) I had implemented
PIC16C57 because of its cheap
nature and high performance
with the 8-bit, CMOS
microcontroller based on
EPROM/ROM that will be
performing the action related to
the signal transmission, and
signal coding and decoding
III) I had kept the project very
simple in which, the Bluetooth
wireless modem will be used as
the source of medium for the
exchange of signal between the
Career Episode 1: CE 1.3.1
Career Episode 2: CE 2.3.1, CE
2.3.4, CE 2.2.5 and CE 2.4.2
Career Episode 3: CE 3.3.1,
CE 3.3.3

devices
PE1.4 Discernment of
knowledge development
and research directions
within the engineering
discipline
I) I was responsible for
gathering equipments and
components for the project and I
had ensured that actual
component is available along
with the lowest budget that
could be kept while delivering
the project
II) I had practically
implemented my engineering
skills and knowledge under the
implementation of signal
transmission and tools
consideration for the project
III) I had used the Bluetooth of
sensitivity 84dBm and power
4dBm that implies the control
over the robot and allows the
control in the hand of the PC
user
Career Episode 1: CE 1.2.5,
CE 1.3.1 and CE 1.4.2
Career Episode 2: CE 2.3.2,
CE 2.3.4 and CE 2.4.1
Career Episode 3: CE 3.3.2, CE
3.3.3 and CE 3.4.1
PE1.5 Knowledge of
contextual factors
I) I have designed the system in
such manner that the robots can
Career Episode 1: CE 1.2.1, CE

impacting the engineering
discipline.
be operated from the control
office through sending
commands via PC
II) I had developed objectives
related to the development of the
system, which can enable high
security for the cars
III) I had implemented the
Bluetooth modem for the control
of the quality of the view and
navigation of the wireless
camera
1.2.2,
Career Episode 2: CE 2.2.1, CE
2.2.2
Career Episode 3: CE 3.2.1,
CE 3.2.3
PE1.6 Understanding of
the scope, principles,
norms, accountabilities
and bounds of
contemporary engineering
practice in the specific
discipline
I) I have also implemented the
latest QwikRadio™ technology
of the Micrel, which is a true
“data-in, antenna-out”
monolithic device
II) I had used the banking
scheme for the devices needing
more than 32 registers of the
memory register files
III) I had used 8051
microcontroller with the power
Career Episode 1: CE 1.2.3, CE
1.3.3, CE 1.3.4 and CE 1.3.2
Career Episode 2: CE 2.2.3, CE
2.3.1 and CE 2.3.2
Career Episode 3: CE 3.2.3, CE

supply of 5V implemented with
the serial (UART) that is the
core principle of the project
3.3.1 and CE 3.3.2
PE 2 ENGINEERING APPLICATION ABILITY
PE2.1 Application of
established engineering
methods to complex
engineering problem
solving
I) I had implemented senor into
the system in manner to make
the robot vehicle to find its path
automatically
II) I had accomplished the
MCCS firmware design and
C2C abbreviation had been used
for the C2C plus C compiler for
Scenix and PIC processors
III) I had kept the project very
simple in which, the Bluetooth
wireless modem will be used as
the source of medium for the
exchange of signal between the
devices
Career Episode 1: CE 1.2.4,
CE 1.3.1 and CE 1.4.2
Career Episode 2: CE 2.3.3,
CE 2.3.4 and CE 2.4.1, CE
2.4.2
Career Episode 3: CE 3.3.1, CE
3.3.2 and CE 3.4.2
PE2.2 Fluent application of
engineering techniques,
I) I had applied the engineering
skills gathered during my
graduation and implemented
Career Episode 1: CE 1.3.3, CE
1.3.2 and CE 1.3.1

tools and resources. those skills within the project
II) I had accomplished the
MCCS firmware design and
C2C abbreviation had been used
for the C2C plus C compiler for
Scenix and PIC processors
III) I had used the Bluetooth of
sensitivity 84dBm and power
4dBm that implies the control
over the robot and allows the
control in the hand of the PC
user
Career Episode 2: CE 2.3.1, CE
2.3.2 and CE 2.3.3
Career Episode 3: CE 3.3.1, CE
3.3.2 and CE 3.3.3
PE2.3 Application of
systematic engineering
synthesis and design
processes.
I) I had applied the engineering
skills gathered during my
graduation and implemented
those skills within the project
II) I had also implemented
Universal Programmer ALL-11
that consists of universal
programmable configuration or
memory that includes
EEPROM, EPROM, PLD,
FLASH, microcontrollers and
Career Episode 1: CE 1.2.3, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.3.3 and
CE 2.3.4

Serial PROM, and
microcontrollers from
Microchip, Intel, Motorola and
many more
III) I was working on the signal
transmission sector of the
project and limiting the range of
the system through selecting the
components at the low budget
Career Episode 3: CE 3.2.5
PE2.4 Application of
systematic approaches to
the conduct and
management of
engineering projects
I) I had Specified the codes for
the exact output was another
challenge that was accomplished
in the project because of my
skills
II) I had used PIC, as it is a low
current device that can be
operated at less than 2mA with
the clock oscillator speed of
approximately 4Mhz, at lower
speed 32 KHz the device will be
drawing 15uA
III) I have integrated the
receiver within the computer
Career Episode 1: CE 1.3.1 and
CE 1.3.2
Career Episode 2: CE 2.2.3, CE
2.3.1, CE 2.3.2 and CE 2.3.3
Career Episode 3: CE 3.3.1 and
CE 3.3.2

that implies this navigation and
control
PE 3 PROFESSIONAL AND PERSONAL ATTRIBUTES
PE3.1 Ethical conduct and
professional Accountability
I) I have designed the project in
manner to enhance the security
in the warehouses and
storehouses through designing a
robot vehicle that is capable of
sensing the path and the
obstacles and transfer the goods
from one place to another
II) I had used the banking
scheme for the devices needing
more than 32 registers of the
memory register files
III) I had implemented the
Bluetooth modem and the
Bluetooth dongle for the smooth
and efficient transmission of the
signals
Career Episode 1: CE 1.2.3, CE
1.3.3 and CE 1.4.1
Career Episode 2: CE 2.2.3, CE
2.3.5 and CE 2.4.2
Career Episode 3: CE 3.3.3, CE
3.4
PE3.2 Effective oral and
written communication in
I) I was responsible for cross
checking each electrical ad
Career Episode 1: CE 1.2.3, CE
1.3.3 and CE 1.4.1

professional and lay
domains
electronic component that
whether the circuit is closed or
not, which means the current is
flowing through each
component or not
II) I had used the short message
service in place of the DTMF
technique because of its
flexibility in nature
III) I had used the Bluetooth of
sensitivity 84dBm and power
4dBm that implies the control
over the robot and allows the
control in the hand of the PC
user
Career Episode 2: CE 2.2.3, CE
2.3.5 and CE 2.4.2
Career Episode 3: CE 3.3.3, CE
3.4
PE3.3 Creative, innovative
and pro-active demeanor
I) I was responsible for
gathering equipments and
components for the project and I
had ensured that actual
component is available along
with the lowest budget that
could be kept while delivering
the project
Career Episode 1: CE 1.3, CE
1.4 and CE 1.4.2
Career Episode 2: CE 2.3.5, CE

II) I had ensured that the range
of the signal should be wider
and the user’s mobile phone will
be receiving without any
interference and thus I had used
tools stated in the above section
III) I have implemented my
engineering skills and
knowledge through
implementing AT89S52
Microcontroller, Analog RF
Wireless camera, Bluetooth
modem, and UC Flash, Proteus
VSM, and Keil IDE software
2.4, CE 2.2.5 and CE 2.4.2
Career Episode 3: CE 3.2, CE
3.3
PE3.4 Professional use and
management of
information
I) I was assigned to crosscheck
the connections and make sure
that, microcontrollers and
sensors are receiving the signals
as per the theory.
II) I had selected cheaper
components in manner to
manage the budget of the project
III) I had played my role in
Career Episode 1: CE 1.2.3, CE
1.2.5, CE 1.4.2
Career Episode 2: CE 2.2.3, CE
2.2.5, CE 2.4.2

collaboration with the team and
developed a successful project
that can enhance the experience
of monitoring facilities within
the industries
Career Episode 3: CE 3.2.3, CE
3.2.5, CE 3.4.2
PE3.5 Orderly
management of self and
professional conduct
I) I had implemented Sensors,
RF, IR, DC motor, metal
sensors, Memory, siren,
switches, and motor driver are
the components within the
system
II) I had used MCCS, as the
GSM network can detect it
through the mobile device and it
will be helpful in getting
notification related to the
location of the car
III) I had kept the project very
simple in which, the Bluetooth
wireless modem will be used as
the source of medium for the
exchange of signal between the
Career Episode 1: CE 1.4.1, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.4.2, CE
2.3.2, CE 2.3.3 and CE 2.3.4
Career Episode 3: CE 3.4.2, CE
3.3.1 and CE 3.3.2

devices
PE3.6 Effective team
membership and team
leadership
I) I had contributed myself into
the implementation of IR and
RF signal receiver and
transmitter. This was one of the
major responsibilities other than
the first one that, I was assigned
to crosscheck the connections
and make sure that,
microcontrollers and sensors are
receiving the signals as per the
theory
II) I had implemented the
memory allocation for the
actions and the signal receiving
and transmitted to the IC and
tried to keep the range broader
through implementing GSM
network
III) , I had implemented the
rectifier and then step-down
transformer for limiting the
voltage and a filter to equalize
Career Episode 1: CE 1.4.1, CE
1.4.2
Career Episode 2: CE 2.4.1 and
CE 2.4.2
Career Episode 3: CE 3.4.1 and
CE 3.4.2