Driving Test Lesson Plan: Moving Off and Stopping the Vehicle

This lesson plan focuses on teaching the correct procedure of moving off and stopping the vehicle to ensure a safe and legal drive. It includes required resources, planned location, revision tips, learning goals, and practical application of skills.

Driving test
1

Learner driver needs: (Discussion with the supervising driver and learner driver to determine lesson content)
This forms out the basis for any driving supervision where a discussion about the needs and what
the learner actually want to learn is made. In context of current customers, it has been seen and
reviewed that the client is tend to be unaware about the correct procedure of moving off and
stopping the vehicle. Thus, the main learner driver needs in current context comprises of the
leading and defining him about the how to move off from the side of the road and then again
return on to the side of the road in a proper and safe that also need to be legally correct.
Lesson Preparation
2

Resources required:
Learner driver log book, A Guide to the Driving Test, Road Users' Handbook, other teaching materials and training aids.
It has been seen that it current scenario the client needs to learn about the correct procedure of moving off and stopping the vehicle
thus, the required resources comprises of the providing of a proper driver log book along with the other teaching material which
ensures that the learner must be aware about all the legal rules and legislation while driving so that he can drive in safe manner in
future.
Planned location/s for session: (Route, location and environment appropriate for topic and the learner's level of skill)
As the client is required to learn about the correct procedure of moving off and stopping the
vehicle thus, it is necessary that the location must be an open area where he can drive the car ad
than learn to stop it. Further, practicing about how to proper park the car is also needed so use of
some parking and off side of road could also be made.
Revision (Recap of previous topic, if applicable) Suggested
time: (5 minutes)
Confirms what the learner must already know and do before attempting the lesson:
(Instructor tip: Confirm learning by questioning and through student practical demonstration of skills from previous lesson.)
This section comprises of asking about the previous learnt chapter so that it can be analsysed that how much learning does the
learn get and acquired before starting any new topic and lesson. Following questions can be asked from learner as a revision:
Q1) How you are going to seat properly while driving?
Q2). Do you still remember the ways used to operate the turn signals?
Q 3). How you can release and apply the hand brake?
3

Introduction Suggested time:
(5 minutes)
Learning goals to be covered during the lesson: (Learning goals are to be taken from the Learner driver log book)
(Instructor tip: Ask the learner questions to confirm understanding of the topic before proceeding)
During this lesson
I am going to teach you about the ways and correct procedure of moving off and stopping the vehicle.
Lesson Body Suggested time:
(45 minutes)
Reasons for learning: The importance of the knowledge and skills to be learnt:
(Instructor tip: Engage the learner by challenging, paraphrasing and encouraging them to reflect on the lesson content)
The reason for this
It is important to learn about correct procedure of moving off and stopping the vehicle so that you would not hurt anyone while
driving and can ensure a proper and legal parking of the vehicle.
4

By the end of the lesson the learner will be able to:
The learner would be able to proper moving and stooping the vehicle.
Instructor demonstration and student practical application of skills:
Skills to be demonstrated by the instructor (What to do and how to do it, at a pace appropriate to the learner):
(Instructor tip: Ask the learner questions to confirm understanding before the learner takes control of the vehicle)
Effective Vision skill are required for looking well ahead, reading the traffic, observing hazards and
positioning the car along with the proper Steering skill to effectively push pull and rotational of the vehicle.
Student practically applies knowledge and skills in a range of contexts and situations appropriate to the
learner:
(Instructor tip: Maximise student practice time)
Yes, by the way of maximizing the time of practice and leading them to appropriate traffic
5

situation.
Recap Learning Goals Suggested
time: (5 minutes)
Lesson summary:
(Instructor tip: After the lesson has actually taken place)
Q1). Do you know where are the blind spots of the car?
Q 2). Can you tell me how much of a gap we need when we are moving off to be safe?
Q3). Can you show me how do you do the two-stage braking
Identify student strengths:
Proper vision and effective analysis of the traffic of speed is the strength
Identify areas for further development:
Improvement in the steering and cornering skill can be made.
6

Confirm student strengths
Vision and quick reading of traffic is the strength.
Link to the Learner driver logbook learning goals for next lesson:
In next session learning about driving laws and legislation can be made to ensure a safe drive.
REFERENCES
Vasconcelos Filho, E. and et. al., 2021. CopaDrive: An Integrated ROS Cooperative Driving
Test and Validation Framework. Robot Operating System (ROS): The Complete
Reference (Volume 6), 962, p.121.
Kinnear, N. and et. al., 2021. Modelling the Relationship Between Practical Driving Test Faults
and Collision Risk Post-Test (No. TRBAM-21-03039).
7