Improving Smart Home Security with Power Line Carrier System and Smart Sensing Techniques

Writing Proposal for ITC571
Student Name and ID
Project area Internet of things
Type of Project Theoretical
Technology PCS (Powerline carrier system)
Technique Smart sensing technique
Domain IoT: Smart home security
Project name Power line career system based on smart sensing technique to manage security in Smart-homes
Key words IoT, Sensors, Security, Smart –home, Sensing techniques, management, Wireless networks, automation
1. Introduction Background
Information,
Issues and
Current Solutions
1. Now a day, Security is a very important issue and it is increasing day by day. Advancement in
technology provides many solutions to manage security in homes to provide automation to the
security system and avoid unauthorized access. The IoT based techniques manage security with smart
appliances and help in securing the home from theft. But there are many issues faced by devices and
technology to manage security. These appliances are power consuming as well as create issues at the
monitoring time such as authentication problem, identification error, and interference in security. To
overcome these issues some smart sensing techniques introduced that is based on IOT. Smart sensors
and pyroelectric passive infrared sensor (PIR) is used for authentication. Wireless sensor networks,
Zigbee networks, low power consume-automated services, Motion detection in IOT remote
monitoring system and GPS are used as current technologies for improvement and better
management.
Shortcomings/
limitations in the
current /existing
solutions
2. Security is increasing with modern technologies but it has some limitations as follows:
 The current solution PCS includes technical issues signal noise issue arises during
transmission of bandwidth
 PCS technology faces security issue due to single power line
 Threats of cyber-attacks and cyber-crime to personal information.
 Sensor failure and network issues also generate problem during authentication and
verification.
Importance of
solving this
3. The research is focusing on solving the issue of PCS through integrating RS-232 interface in the
signal power line. The sensing techniques controls home appliances as well as monitoring data