IS Security and Risk Management in the Manufacturing Industry

This essay discusses the security risks faced by the manufacturing industry and provides possible solutions to protect functionalities. It explores the use of encryption technology, strong passwords, and firewall for information access. The importance of general and application management control is also highlighted. Additionally, the essay discusses security techniques to achieve CIA requirements.

Running head: IS SECURITY AND RISK MANAGEMENT
IS security and Risk management: Manufacturing Industry
Name of the student:
Name of the University:

1IS SECURITY AND RISK MANAGEMENT
Table of Contents
1. Introduction to identify the selected sector..................................................................................2
2. Literature review..........................................................................................................................2
2.1 Current or possible future potential security issues related to manufacturing sector............4
3. Possible solution of the threats....................................................................................................6
3.1 Discuss the ways manufacturing organizations can protect their functionalities for the
threats...........................................................................................................................................6
4. General and application management control.............................................................................8
5. The security techniques can be used to achieve CIA requirements.............................................8
References......................................................................................................................................10

2IS SECURITY AND RISK MANAGEMENT
1. Introduction to identify the selected sector
Disaster, computer crimes, security breaches are the most common terms widely using by
the business organizations while discussing or reviewing their security functionalities and
possible risks. In order to minimize theses risks accurate risk mitigation measures and risk
responses should be implemented by the business organizations. The sector specifically chosen
for this essay is manufacturing industry.
A primary research is being conducted to understand as well as realize the difference
between general management control and application control used by the manufacturing
companies to reduce the risks (Zhang and Gupta 2018). Three potential security issues those are
interrupting the regular success and expected outcomes of the manufacturing organizations and
the respective risk mitigation approaches needs to be evolved to minimized these risks are all
elaborated in this essay. Apart from this, in order to achieve the CIA requirements of the
manufacturing industry are also illustrated in this essay.
2. Literature review
According to Lee and Lee (2015) one of the most noteworthy advances identified in the
computer science development, information and communication technologies are represented by
cyber physical security (CPS). Within the latest installment in security profile series as well as
compliance risks various industries are facing variant challenges. If consumers goods, broad
range company presentation are included and considered for the organizations then different
types of security threats will be identified. Based on the product and service types the security
threat also varies from each other. The cyber physical system is used for collaborating different

3IS SECURITY AND RISK MANAGEMENT
computational entities together. The Research and Development (R&D) department of the
manufacturing industries are required to be identified at the project initiation phase. Zhong et al.
(2016) stated that in order to distribute the products and goods professionally and properly
among the consumers and other user’s proper supply chain management mechanism is required
to be incorporated.
The manufacturing industry should also focus on the materials they are expecting from
the suppliers (Dofe et al. 2017). The contracted vendors and suppliers should supply quality raw
materials to fulfill the manufacturing needs and requirements. Professional project management
system will affect the manufacturing companies is various ways that include input availability
required for processing the production, cost and manufactured item profitability. This will help
to create a professional relational between the suppliers and consumers (Monostori et al. 2016).
The industrial managers and entrepreneurs must follow strategic viewpoints of the users and
product and service developers. On the other hand, Inter of Things (IoT) is recognized as a very
crucial area of future technologies and it is also obtaining vast attention from different range of
industries. The IoT technologies that are essential for IoT based product and service development
in the manufacturing industry must undertaken all enterprise application. According to Beninger
(2017) it will help to improve the values of the consumers.
Use of technologies are increasing day by day however, if accurate physical security
measures are not adopted by the manufacturing industry then it will cause major threats to the
organizational owners. Moreover, it can be said that each of the technologies utilized in the
manufacturing industry must have proper protection and security measures. The manufacturing
industry offers either services or products to their consumers. Reliable inputs and distribution
cost are the main concern or focus for the owners of the manufacturing industries. The

4IS SECURITY AND RISK MANAGEMENT
knowledge management area that come under the focus of any manufacturing industry is supply
chain because whatever service and product the company offers should be shipped or delivered
to the consumers within expected time and budget. A poor supply chain management system can
bring the entire production of the manufacturing industry to a halt.
According to Urciuoli and Hintsa 2017) if the industry fails to adopt proper security
measures in terms of cryptography, firewall and DMZ then the entire industry will face massive
operational and functional errors. In order to deliver services and products these days all the
manufacturing industries use online services. In case of online services and operation the
consumers have to input their financial and personal information. This information stored in the
server must not be retrieved or accessed by any of the users. It is essential for the developers to
implement proper security measures so that only authorized users get opportunity to access
information from the server (Lopez et al. 2017). The manufacturer could be forced for procuring
materials from all alternative resources much quickly that possibly results high price of the
products along with lower profitability rate. If all the data are not professionally protected then
any user would come and access information and misuse those easily. Technical advancement is
the best possible way can be used to protect the information from the unwanted attackers. The
infrastructure of the company is also required to be secured.
2.1 Current or possible future potential security issues related to manufacturing
sector
The industrial and manufacturing companies mostly do not consider themselves as a
profitable target for cyber security as a result they do not focus on the security mechanisms.
Three different security risks facing by the manufacturing companies are as follows:

5IS SECURITY AND RISK MANAGEMENT
Usage of older technologies: According to Soomro, Shah and Ahmed (2016) most of the
manufacturing industries these days use older technologies which causes outdated manufacturing
base and gives high competition to the other industries. Old technology makes the usable system
much susceptible to be attacked. The others may be designed initially for the internet
connectivity. Opara-Martins et al. (2015) stated that it is the responsibility of the security
providers and marketing manager of the manufacturing industries to improve the security
concerns. The others may not have been designed to assist the internet connectivity. According
to Zhang and Gupta (2018) the unsupported version of Microsoft operation system will also
restrict the system run. Apart from this, sometimes it is also found that people who have
implemented the operational and functional activities in the manufacturing industry are not
present. That time if any sort of error is determined then major challenges will occur in the
operational activities (Susanto and Almunawar 2016). The main reasons for which globally the
rate of ransonware attack is increasing are use of older Windows version.
Inappropriate industrial system: The other threat that interrupts the business
effectiveness and operational efficiency of the manufacturing industries is inappropriate usage of
industrial system (Frost and Hamlin 2017). As the manufacturing industry is completely relied
upon industrial control system therefore, if proper security measures are not considered then the
entire industry success will be corrupted (Yang and Fung 2016). It is responsibility of the senior
security engineer or senior specialist to develop the security solution in such way so that it can
resolve the industrial challenges. Mostly these manufacturing systems are connected to ICS
network therefore security foe those networks are also required. The associate system actors also
create massive threat to the business organization. In order to mitigate the operational and
functional risks proper security measures are to be possessed by the manufacturing industry. In

6IS SECURITY AND RISK MANAGEMENT
fact if proper industry system is not adopted then the third parties and internal users will get a
chance to easily access in credentials and other information as well.
Information access: The other severe challenge that interrupts the output and security
measures of the manufacturing industry are access to all information (Urciuoli and Hintsa 2017).
The users should not have irregular access to the confidential information set. No presence of
technical and managerial mechanism will lead the success of manufacturing industry towards
failure. Certain free resources are readily available in the market those are widely used by the
manufacturing industries to keep the consumers and users engaged to their services (Opara-
Martins, Sahandi and Tian 2015). As the numbers of users and consumers are increasing day by
day therefore, managing them all has become a major risk. The security managers are to
investigate on cyber security providers to adopt the most suitable security measure in their
manufacturing industry. For the manufacturing industry other risks those can be evolved in
future are application of IOT and investment on the IOT applications.
3. Possible solution of the threats
3.1 Discuss the ways manufacturing organizations can protect their functionalities
for the threats
Information access risk: The risk that has been addressed for this essay is information
access. It is mandatory for the manufacturing company head to implement proper security
measures to keep the confidential information secured from the external and unauthorized users.
This threat can again be subdivided into two phases such as internal threat and external threat
(Susanto and Almunawar 2016). Internal threat are generated due to individual activities those
have legitimate access like employees, contractors, some associate sponsors etc. Identification of

7IS SECURITY AND RISK MANAGEMENT
these internal intruders is very difficult from the industrial perspectives. These types of users can
easily access informant and use them to fulfill some unethical purposes. In order to resolve the
risks with information access the protection mechanism those are to be implemented include the
below:
Implementation of encryption technology: Use of encryption technology is referred to
as one of the most appreciated approach that helps to protect the information stored in the server.
It converts the plain text into cipher text and only authorized users have the authentication to
decrypt these data with the help of encryption key (Mills et al. 2016). This mechanism verifies
the message origin and proofs that the content of the message are all as it is and not been
changed. In this process the sender can never deny while sending the messages.
Use of strong password and firewall: Application firewall is a kind of control input that
helps to operate through potentially monitoring and blocking the system inputs, outputs and other
services. The application firewall helps to limit the access in the operating system (Zhang and
Gupta 2018). A conventional firewall can control the data flow which implies that none of the
unwanted users will be able to access information from the server.
The general management control approach is used every day by the manufacturing
industry managers and working employees to successfully complete the identified industrial
objectives of the business organizations (Beninger 2017). The general management control is the
operational methods enables work for proceeding as expected previously. Mainly, the general
management control discourages the possible risks and all assumed irregularities.

8IS SECURITY AND RISK MANAGEMENT
4. General and application management control
In order to protect the functionalities against identified manufacturing industry threats the
industry should consider the general and application management control.
For instance, most of the manufacturing industries use both the general access control and
application control to protect their IT environment from the unwanted users (Shukla et al. 2017).
The access management control is referred to as a process helps to integrate the functionalities
and operations related to user database auditing and enforcement are all managed with the help
of he application management control approach. On the other hand, the industry should also use
this tool followed by proper policies and regulations.
5. The security techniques can be used to achieve CIA requirements
The resources those can be misused in coming future include illegal site visit,
implementation of certain unauthorized changes, and spread of scam, spam or malicious codes.
Installations of illegal software into the system used in the manufacturing industry can again
implement massive issues and challenges for the operational manager. Installation of a weaker
password is another challenge that interrupts expected success line and outcomes of the
manufacturing industry (Dautov et al. 2017). Apart from this, the manufacturing industry
requires to follow the payment card industry level data security standards to encrypt the data of
the consumer’s payment cards. In order to achieve the Central Intelligence Agency (CIA)
standards the committee members should use end to end encryption to intercept the
communication channel between the intruders and users. The resources those can be misused in
coming future include illegal site visit, implementation of certain unauthorized changes, and
spread of scam, spam or malicious codes. Installations of illegal software into the system used in

9IS SECURITY AND RISK MANAGEMENT
the manufacturing industry can again implement massive issues and challenges for the
operational manager. Installation of a weaker password is another challenge that interrupts
expected success line and outcomes of the manufacturing industry

10IS SECURITY AND RISK MANAGEMENT
References
Beninger, P., 2017. Opportunities for Collaboration at the Interface of Pharmacovigilance and
Manufacturing. Clinical therapeutics, 39(4), pp.702-712.
Dautov, A.L., Puryaev, A.S. and Sotnikov, M.I., 2017. THE STUDY OF THE ACCESS
MONITORING AND CONTROL SYSTEM APPLICATION IN ENTERPRISES. JOURNAL
OF FUNDAMENTAL AND APPLIED SCIENCES, 9, pp.1820-1829.
Dofe, J., Gu, P., Stow, D., Yu, Q., Kursun, E. and Xie, Y., 2017, May. Security threats and
countermeasures in three-dimensional integrated circuits. In Proceedings of the on Great Lakes
Symposium on VLSI 2017 (pp. 321-326). ACM.
Falkenthal, M., Breitenbücher, U., Christ, M., Endres, C., Kempa-Liehr, A.W., Leymann, F. and
Zimmermann, M., 2016. Towards function and data shipping in manufacturing environments:
how cloud technologies leverage the 4th industrial revolution. Proceedings of the 10th Advanced
Summer School on Service Oriented Computing, pp.16-25.
Frost, J. and Hamlin, A., 2017. INTERNET SECURITY AND PRIVACY THREATS, AS
PERCEIVED BY AMERICAN AND INTERNATIONAL BUSINESS STUDENTS. Global
Journal of Business Disciplines, 1(1), p.36.
Lee, I. and Lee, K., 2015. The Internet of Things (IoT): Applications, investments, and
challenges for enterprises. Business Horizons, 58(4), pp.431-440.

11IS SECURITY AND RISK MANAGEMENT
Lopez, A.B., Vatanparvar, K., Nath, A.P.D., Yang, S., Bhunia, S. and Al Faruque, M.A., 2017. A
security perspective on battery systems of the Internet of Things. Journal of Hardware and
Systems Security, 1(2), pp.188-199.
Mills, A.J., Watson, R.T., Pitt, L. and Kietzmann, J., 2016. Wearing safe: Physical and
informational security in the age of the wearable device. Business Horizons, 59(6), pp.615-622.
Monostori, L., Kádár, B., Bauernhansl, T., Kondoh, S., Kumara, S., Reinhart, G., Sauer, O.,
Schuh, G., Sihn, W. and Ueda, K., 2016. Cyber-physical systems in manufacturing. CIRP
Annals, 65(2), pp.621-641.
Opara-Martins, J., Sahandi, R. and Tian, F., 2015, November. A business analysis of cloud
computing: Data security and contract lock-in issues. In 2015 10th International Conference on
P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC) (pp. 665-670). IEEE.
Pogliani, M., Quarta, D., Polino, M., Vittone, M., Maggi, F. and Zanero, S., 2019. Security of
controlled manufacturing systems in the connected factory: the case of industrial robots. Journal
of Computer Virology and Hacking Techniques, pp.1-15.
Shukla, S., Shroff, P., Nair, V. and Kuruvilla, R., 2016. Access Management and Control using
NFC. International Journal of Science and Research (IJSR), 5(3), pp.564-566.
Soomro, Z.A., Shah, M.H. and Ahmed, J., 2016. Information security management needs more
holistic approach: A literature review. International Journal of Information Management, 36(2),
pp.215-225.

12IS SECURITY AND RISK MANAGEMENT
Susanto, H. and Almunawar, M.N., 2016. Security and privacy issues in cloud-based e-
government. In Cloud Computing Technologies for Connected Government (pp. 292-321). IGI
Global.
Thoben, K.D., Wiesner, S. and Wuest, T., 2017. “Industrie 4.0” and smart manufacturing-a
review of research issues and application examples. International Journal of Automation
Technology, 11(1), pp.4-16.
Urciuoli, L. and Hintsa, J., 2017. Adapting supply chain management strategies to security–an
analysis of existing gaps and recommendations for improvement. International Journal of
Logistics Research and Applications, 20(3), pp.276-295.
Yang, W. and Fung, C., 2016, June. A survey on security in network functions virtualization.
In 2016 IEEE NetSoft Conference and Workshops (NetSoft) (pp. 15-19). IEEE.
Zhang, Z. and Gupta, B.B., 2018. Social media security and trustworthiness: overview and new
direction. Future Generation Computer Systems, 86, pp.914-925.
Zhong, R.Y., Newman, S.T., Huang, G.Q. and Lan, S., 2016. Big Data for supply chain
management in the service and manufacturing sectors: Challenges, opportunities, and future
perspectives. Computers & Industrial Engineering, 101, pp.572-591.

13IS SECURITY AND RISK MANAGEMENT