IT Networking Architecture for XYZ Hospital

This is a network design plan for XYZ hospital. The plan includes an overview of the organization, a network design and floor plan of the building, IP addresses and subnets, used devices and cable types, and a cost analysis of the whole project.

IT Networking Architecture 1
IT NETWORKING ARCHITECTURE
By: (Name)
(COURSE TITLE)
(TUTOR NAME)
(COLLEGE NAME)
(DATE)

IT Networking Architecture 2
Abstract
Designing a certain network can be very challenging. To design a scalable and reliable
network designers ought to realize that each network component has a distinct network design
requirements. This is a network design for a four floors building.

IT Networking Architecture 3
Table of Contents
Scenario.......................................................................................................................................................4
Introduction.................................................................................................................................................4
Background of the organization...................................................................................................................4
Proposed Server requirements.................................................................................................................4
Proposed hardware requirements.............................................................................................................5
Floor Plan....................................................................................................................................................6
Network Design...........................................................................................................................................6
IP addresses and subnets..............................................................................................................................7
Devices and cable types...............................................................................................................................8
Cost analysis................................................................................................................................................9
References.................................................................................................................................................10

IT Networking Architecture 4
Scenario
XYZ hospital is located in four floor plan building. The hospital has four major
departments which are the finance department, IT department, medical services department, and
the human resource department. The medical department has the highest number of employees
who are 100 medical professionals. The finance department has 20 employees, the IT section has
five employees, and the human resource department with 10 employees. All these members are
required to be access wide area network and to connect to share one shared printer.
Introduction
This is a network design plan for XYZ hospital. The first part will give an overview of
the organization. The second part will highlight a network design and floor plan of the building.
The third part will show IP addresses and subnets, used devices and cable types. The last part
will be a cost analysis of the whole project.
Background of the organization
XYZ hospital specializes in cancer consulting services. With the current technological
needs, the current network infrastructure can’t cater for the organizational needs; the network do
not meet the requirements of the modern network standards. Cat 4 type of cabling has been
utilized. There no access to wireless access points. The hospital has only one server which is
installed with windows server 2008. The user computers are installed with windows XP expect
the IT department user computers with windows 7 professional. The organization utilizes only
one switch to connect to all the PC computers in the organization.
Proposed Server requirements
The organization need to note that server is the most important element in the
organization. It acts as the brain of the firm. Server dictates how resources are shared and how

IT Networking Architecture 5
information flows from one department to another. From the look of the organization needs, it is
evident that the organization needs to use high end servers that meets the needs of the
organization. The following table summarizes server specifications needed by the organization
Table 1: Server specifications
Processor Model: Intel
Speed: 3.16 Hz/6 MB/1333MHz
Number of processors 1/1
Memory 3GB DDR3 800 MHz via DIMM slots (Matthews,
2014)
Expansion slots 2 PCI-Express X8 slot
Network Interface Dual Gigabit Ethernet
Operating system Windows server 2012 R2
Power supply 450 W 1/2
Proposed hardware requirements
From the network needs it is evident that the organization needs four workstations in the
four departments. The organization need to upgrade its user’s computers to Dell type of PCs.
Table 2 below describes the specification user computer needs (IntelCorporation, 2013)
Table 2: Hardware specifications
Hardware Specification
Processor Model: Intel Core 3
Speed: 2.40 Hz
Operating System Windows 7 Professional
Chassis configuration Mini-Tower Chassis configuration

IT Networking Architecture 6
Monitor 19 inch
File system NTSFS File system
Network Interface Card RJ45 supportive
Floor Plan

IT Networking Architecture 7
Network Design

IT Networking Architecture 8
IP addresses and subnets
The organization ought to utilize class C type of IP address.
Table 3: IP addressing and sub-netting
Network ID Hosts
require
d
Slash
Prefi
x
Subnet Mask Network
Address
Host
Address
Broadcast
Address
Ground
Floor
(Medical
professionals
)
200 /24 255.255.255.0 192.168.0.0 192.168.0.1-
192.168.0.25
4
192.168.0.25
5
1st Floor
(finance
Department)
150 /24 255.255.255.0 192.168.1.0 192.168.1.1-
192.168.1.25
4
192.168.1.25
5
2nd Floor (IT
department)
100 /25 255.255.255.12
8
192.168.2.0 192.168.2.1-
192.168.2.25
4
192.168.2.25
5
3rd Floor
(human
resource)
50 /26 255.255.255.19
2
192.168.2.12
8
192.168.2.12
9-
192.168.2.19
0
192.168.2.19
1

IT Networking Architecture 9
Devices and cable types
The following table summarizes the number devices required and its specification
Table 4: Device and cabling
Device Specification Description
Router Model: 3640
Series: 3600
This device ought to sit
between the organization
firewall and the first router.
16 switches Model: C3750V2-24TS-TS
Series: 3700
This is a manageable switch.
The organization IT
department has the capability
of managing the switch. The
switch is also upgradable
with a total of 24 ports
Firewall Cisco Firewall model ASA
5500-X Series
This is a type of firewall
which has next generation
and stateful inspection
capabilities. The firewall has
all security features required
(Kurose & Ross, 2017) .
cabling Cat 5e This is type of cabling has
very low attenuation as
compared to the current type

IT Networking Architecture 10
of cabling
Cost analysis
Table 5: Cost analysis
Device Number of devices Unit cost Total cost
Server 1 $2000 $2000
Dell User computer 130 $500 $65,000
HP printer 1 $1000 $1000
RJ 45 20 Pkts $10 $200
RJ 45 Ethernet
Coupler Connector
5 $4 $20
Cat 5e Riser 1000ft
blue, Unshielded
twisted Pair,
trueCABLE
10 boxes $110 $1100
Router 1 $100 $100
Switch 16 $80 $1280
TOTAL $70700

IT Networking Architecture 11
References
IntelCorporation, 2013. Networking. Computer networking, IV(2), pp. 39-78.
Kurose, J. F. & Ross, K. W., 2017. Networking. Computer security, II(2), pp. 27-78.
Matthews, M. S., 2014. Windows Server 2012. Networking, II(1), pp. 45-89.