Local Area Networking Technologies | Assignment

Added on -2021-01-06

| 8 pages| 2286 words| 108 views

Trusted by 2+ million users,
1000+ happy students everyday

Showing pages 1 to 3 of 8 pages

LO1 Understand the impact of LAN technologiesTask 1A.C 1.1 critically evaluate different LAN technologiesAn area place network (LAN) can be described as computer network that is designed to get a limited geographic area for example a building or a campus. Even though a LAN can be used seeing that an isolated network for connecting computers in a great company, most LANs today can also be linked to a wide area network (WAN) or the Net. You will find different LAN technologies just like Ethernet,,, Token Ring, Symbol Bus, FDDI, and CREDIT LAN but Ethernet is usually by just far the superior one.In 1985, the Pc Society of the IEEE started a project, generally known as Job 802, to set standards to allow intercommunication among equipment via a variety of manufacturers. The job specified functions of the physical layer and the data website link layer of major LOCAL AREA NETWORK protocols. The standard was implemented by the American National Criteria Institute (ANSI). In1987, the International Organization intended for Standardization (ISO) furthermore permitted it as a great intercontinental standard under the designation INTERNATIONALE ORGANISATION FÜR STANDARDISIERUNG 8802.A.C 1.2 critically analyse traffic intensive services and their performanceLogical Link Control (LLC)In IEEE Project 802, flow control, error control, and part of the framing tasks are collected into one sub layer called the logical hyperlink control. Framing is managed in both equally the LLC sub layer and the MAC sub layer. The LLC provides a single data link control process for all IEEE LANs. In this manner, the LLC is different in the media access control sub layer, which provides one of a kind protocols several LANs. A single LLC standard protocol can provide interconnectivity between unique LANs because the MAC is manufactured merely by it sub layer clear. Mass media Access Control (MAC)
IEEE Project 802 provides built a sub layer referred to as multimedia systems access control that identifies the specific access strategy for each LAN. For example, this defines CSMA/CD as the media access method for Ethernet, LANs and the token passing approach for Token Ring and Token Bus LANs. Compared with the LLC sub layer, the MAC sub layer contains numerous distinct modules; each explains the access method plus the framing format specific for the corresponding LAN protocol.Framework FormatThe Ethernet framework contains seven fields: preamble, SFD, DENN, SA, period or type of protocol info gadget (PDU), upper-layer info, and the CRC. Ethernet would not provide any unit intended for acknowledging received frames, rendering it what is known as a difficult to rely on medium. Acknowledgments must be put in place at the higher layers. The format of the MAC body is shown below.A.C 1.3 Discuss LAN concerns and make recommendations to sustain network security, reliability and performanceTypical Ethernet uses the I-persistent CSMA/CD. The acronym CSMA/CD signifies carrier-sense multiple gain access to with collision detection and describes how the Ethernet, process regulates communication among nodes. In other words, CSMA/CD is a pair of rules determining how networking devices respond when two devices attempt to use an info channel simultaneously (called a collision).This standard permits products to detect an effect. After detecting a car accident, a device waits a random delay time and after the attempts to re-transmit the message. If the device finds a wreck again, that waits as long to try to re-transmit the message two times.LO2 be able to design LAN infrastructuresTask 2A.C 2.1 design a LAN infrastructure for the company which will facilitate all of their requirementsThere are four principal topologies used in LANs; Bus, Ring, Star and Tree topologyBus topology: All gear are attached to a central cable, known as the backbone or shuttle. Bus networks are economical and easy to install for compact networks relatively. Ethernet, devices use a bus topology.

Found this document preview useful?

You are reading a preview
Upload your documents to download
Become a Desklib member to get accesss

Students who viewed this