State Transition Diagram for Oral B 5000 Braun Electric Toothbrush

Name of the Student
Assignment 1
State transition diagram
Name of the Instructor
Date

Introduction:
The main goal of this assignment is to develop a state transition diagram for different
operation of the Oral B 5000 Braun electronic toothbrush. The different functionalities of the
electric toothbrush is entirely controlled by the SmartGuide user interface which is a software
developed by Oral B company and built-in with the hardware of the electric toothbrush. In this
assignment the state transition diagram is developed of the different modes and phase including
On and OFF in which the toothbrush operates based on the SmartGuide signal. The state
transition diagram is basically an interchangeability of different states diagram based on certain
condition. The initial state is modelled as circular in state diagram and other states are
represented as corner-curved rectangles. Microsoft Visio is a useful tool for building attractive
state transition diagrams and thus it is used here with the built-in template for UML state
Machine inside Visio. The states assumed in machine or toothbrush are OFF state, Wait state, On
state, Daily clean mode, deep clean mode, sensitive mode, massage mode, whitening mode and
tongue clean mode. The state transition diagram modelled here has the same initial and final state
as OFF state as electric supply can go to shutdown anytime when the supply signal from it
rechargeable battery is too low. However, due to its several functionality and user controlled
operation with live feedback of the brushing experience, most of the dentists recommend to use
Oral B toothbrush for taking care of the mouth in a regular basis. With regular brushing with
Oral B Braun 5000 electric toothbrush in a prescribed manner by dentist or the company almost
every dental problem can be solved within few weeks.
Oral B Braun 5000 electric toothbrush Functionality & SmartGuide:
The different primary functions of the oral B toothbrush of model 5000 Braun are listed below.

 The charging of the electric toothbrush is quite simple as it only required to plug the
charger connected to the toothbrush to an outlet and after full charge the toothbrush can
operate 1-2 days without charging.
 The timer for brushing can be easily adjusted by the user with the help of SmartGuide
user interface. There is an option for the user for choosing between the professional mode
and 2-minuite timer. The 2-minuite timer has a short stuttering sound at the start and after
2-minuites of brushing time is passed a green light in the toothbrush flashes and
toothbrush stops. In professional timer mode a green light is displayed after completion
of each mode of brushing. Every brushing mode is executed in professional timer mode
for 30seconds except the deep clean mode which is executed for about 45 seconds.
 The real time display of the brushing experience can be followed by user through any
computer. This is possible by the Bluetooth connectivity of the toothbrush by which the
real time data is sent to the computer.
 The toothbrush has a total of 5 brushing modes and one tongue cleaning mode and the
user can switch between the modes as desired or each of the modes are automatically
switch any timer mode. The different modes of the toothbrush are daily clean mode, deep
clean mode, whitening mode, sensitive mode and massage mode.
 A pressure sensor is installed in the toothbrush which senses the pressure of the
toothbrush and if the pressure is over specified limit then a red light flashes in the
toothbrush (a warning message on the SmartScreen is also displayed) and when operating
in the daily clean or deep clean mode the toothbrush automatically switches to sensitive
mode. This feature is activated only in daily clean and deep clean mode as in these modes