Standard Operational Procedures on Manual Handling Processes

This document provides a comprehensive guide on the standard operational procedures for manual handling processes in logistics. It covers the legislation, scope, focus, safe work practices, workplace organization, reporting, and review. The document also offers access to solved assignments, essays, and dissertations on this topic at Desklib.

National Camper Trailers
Logistics
Standard Operational Procedures on Manual
Handling Processes
INDEX
Legislation
References
1 INTRODUCTION
2 SCOPE
3 FOCUS
4 RECEIVING OF PACKAGING AND PARCELS
5 RECEIPTING INTO STOCK
6 SAFE WORK PRACTICES
7 WORKPLACE ORGANISATION
8 REPORTING
9 REVEIW
LEGISLATION
Version

REFERENCE
1. INTRODUCTION
The Standard Operation Procedure (SOP) is a documentation based on
providing instructions to the logistics team based on manual handling
of packages. The SOP is based on the basic principles that would be set
out by the National Training Dashboard (NTD) based within the banner
of National Camper Trailers (NCT). During the processes of work, the
staff within the logistics department would be required for performing
the task based on handling of loads either on a manual basis or with
mechanical means. This SOP would lay down several kind of measures.
These kind of measures would be taken by staff and management
team of the concerned organisation.
2. Scope
The SOP helps in describing the entire set of procedures that should be
followed. This would be meant based on safeguarding the health of the
employees based on manual handling of packages and lifting
equipment.
3. FOCUS
The focus of this SOP would be able to describe the entire set of
activities that would be followed as per the standards supported by the
industry. This SOP would also put focus on the ways in which the
different parcels would be packaged as per certain pre-defined norms.
The SOP also discusses about the safe form of working practices that
would be needed to be assessed.
Managing Manual Handling Risk
The management of different kinds of risks based on manual handling of
packages would be assessed based on employing certain steps. These
include:
 Collection of task description
 Collection of technical information
 Identification of risk factors
 Identification of improvements that would be implemented
 Performing of review based on improvements and effectiveness
4. RECEIVING OF PACKAGING AND PARCELS
The National Camper Trailer Pty Ltd. is a warehousing organisation that
primarily is responsible for receiving and storing of products, dispatching
of packed products and accessories. This also includes the supply of
products from offsite suppliers and manufacturers. The entire process of
manual handling involves the movement of goods with proper form of
packaging, storage of materials control and thus disposing them to the
proper location. The application also includes forecasting, allocation of
resource, process of flow management, inventory control and
management and after-sales service and support.
2

Some of the processes that must be used for manual handling of goods
are:
 Establishing of firm footing – This process would be able to
ensure the best kind of balance and stable base for lifting of
packages.
 Preparing for lifting – The posture of the body should be bent
backward based on a perpendicular position to the ground.
 Bending on knees – The person should lower down by their legs in
a straight position by lowering their legs.
5. RECEIPTING INTO STOCK
The warehousing department has the primary responsibility to handle
each of the packages by packaging them properly and dispatching them
to the end customers.
6. SAFE WORK PRACTICES
There should be a high form of safe practices that should be ensured
within the workplace. The management should take reasonable steps
for ensuring that materials and goods should be stored, stacked and
kept securely. The safe work practices would involve adequate training
of employees, comprehensive planning and adequate supervision.
7. Workplace Organisation
Some examples of signage and documentation are:
 The signage would be able to provide information based on
a signboard, colour, verbal communication and acoustic
signal.
 The Safety Health and Welfare at Work Regulations 2007
would apply to safety signs.
 Text must be included within the safety signboards.
 Employees should be taught about the importance of
health and safety procedures within the workplace.
 The procedures should be easily taught to the workers.
 There should also be a proper form of survey conducted
from the employees about the impacts made by the safety
procedures.
3

8. REPORTING
Warehouse information and document management would be able to
speed the process of retrieval and access to paper based documents. The
processes of reporting and documentation required to be implemented
could be made possible with the impact of CRM (Customer Relationship
Management) and ERP (Enterprise Resource Planning) systems. These
kind of systems would be able to monitor compliance to the P&P.
9. Review
Based on recording of different processes and documentation, it
could be discussed that each of the tracking of movements should
be done as per proper compliance standards. This could be
managed based on the implication of a record management
software. Different records would be collected, stored, reviewed and
documented properly. This would ensure a proper review of records
and providing recommendations on solving of any issues.
4