Network and Cabling: Understanding Coaxial Cable, Twisted Pair Cable, Fiber Optic, Wireless and Synchronous Connection

This presentation provides an overview of different types of network and cabling including Coaxial Cable, Twisted Pair Cable, Fiber Optic, Wireless and Synchronous Connection. It explains their applications and benefits. The presentation also includes references for further reading.

Network and
Cabling

Introduction
• Networking is an important part for the communication
through computer devices. The computer communicate
with its components with the help of network and
cables.

Coaxial Cable
• Coaxial cables are braided grounded strands of wire
that helps in providing shield and noise immunity to the
communication signals in the wire

Cat 3 UTP and STP
• Category 3 UTP and STP refers to applications
including voice or data. Cat 3 can be used on a
networks for cable segments into workstations

Twisted pair cable
• A twisted pair cable is chiefly made by putting two
isolated protected wires in an appropriate contorted
example.

Fiber Optic
• It is a well innovation which makes utilization of glass
or plastic for transmission of information. A fiber optic
is a notable innovation which comprise of heap of glass
strands, which can be utilized for transmission of
message into light waves

Wireless
• It can be characterized as a strategy for communication
in which information is transmitted starting with one
point then onto the next with the need of any wire, links
or any sort of physical medium.

Synchronous connection
• Synchronous association is predominantly utilized for
this reason as this uses the free checking signals so as
to synchronize the transmission of the information.
They are likewise connected with giving a changeless
association between two end focuses

• Synchronous communication would help in getting
quick reaction and moment input. In this sort of
communication the information would not be sent in
singular bytes but rather would be sent as casings of
extensive information squares

Conclusion
• It can be concluded that the edge size may differ from
couple of bytes through 1500 bytes for the Ethernet.
Furthermore, check is additionally installed in the
information stream encoding and now and again
likewise may give be given on the different check lines
with a specific end goal to influence the sender and in
addition the beneficiary to stay synchronized amid the
casing transmission.

References
• Balubal, C. B., Bernardo, A. R. D., Lasheras, B. L. L., Uyehara, R. A., Bandala, A. A., & Dadios, E. P. (2014, April). Cabling and cost optimization system for IP based
networks through Genetic Algorithm. In Region 10 Symposium, 2014 IEEE (pp. 351-355). IEEE.
• Burris, D. A. (2018). U.S. Patent No. 9,859,631. Washington, DC: U.S. Patent and Trademark Office.
• Engebretsen, D. R., Garbers, B. R., Hermsmeier, D. L., Knight, S. A., & Saley, J. (2015). U.S. Patent No. 9,203,699. Washington, DC: U.S. Patent and Trademark Office.
• Hurtado-de-Mendoza, A., Serrano, A., Gonzales, F. A., Fernandez, N. C., Cabling, M. L., & Kaltman, S. (2016). Trauma-exposed Latina immigrants’ networks: A social network
analysis approach. Journal of Latina/o psychology, 4(4), 232.
• Jain, V., Sharma, G. P., Rao, D., & Levenson, H. (2015). U.S. Patent No. 9,083,613. Washington, DC: U.S. Patent and Trademark Office.
• King, S. C., Shoemaker, C. L., & LeBlanc, S. P. (2015). U.S. Patent No. 9,196,956. Washington, DC: U.S. Patent and Trademark Office.
• Li, Q., Zhang, Z., Guo, Z., Zhang, K., Lai, Y., & Li, J. (2015). Coaxial-cable structure composite cathode material with high sulfur loading for high performance lithium–sulfur
batteries. Journal of Power Sources, 274, 338-344.
• Maw-Zan, J. A. U., Shih, C. C., & Tsu-Tai, K. U. N. G. (2016). U.S. Patent Application No. 14/728,332.
• Nalam, L. S., & Harris, M. C. (2016). U.S. Patent No. 9,485,132. Washington, DC: U.S. Patent and Trademark Office.
• Shoemaker, C. L., Benson, P. H., LeBlanc, S. P., Le Van-Etter, L. L., & Petersen, K. H. (2016). U.S. Patent No. 9,343,797. Washington, DC: U.S. Patent and Trademark Office.
• Simmons, R. L., Benson, P. H., Shoemaker, C. L., & Yemelong, C. E. (2015). U.S. Patent No. 8,947,319. Washington, DC: U.S. Patent and Trademark Office.
• Siu, P. (2017). U.S. Patent No. 9,774,459. Washington, DC: U.S. Patent and Trademark Office.