Network Management - Part 1

Network management – Part 1

Table of Contents
1. Project Description.............................................................................................................2
2. Project Scenario..................................................................................................................2
3. IP addressing.......................................................................................................................3
4. Static and dynamic managed objects..................................................................................3
5. Design.................................................................................................................................5
6. Router..................................................................................................................................5
7. Switch.................................................................................................................................6
8. Printer..................................................................................................................................6
9. Web server..........................................................................................................................7
10. PC....................................................................................................................................7
11. Conclusion.......................................................................................................................7
References..................................................................................................................................9

1. Project Description
The main aim of this project is to design and implement a network management
solution which captures and stores the data from various devices. The network management
can be utilized for the few of apparatuses and conventions, gadgets supervisor and setup
execution of data. The network management can be utilized for the simple network
management tools which are utilized for the gathering of sorting out the data about oversaw
gadgets on IP address network and for sending the request to the server device and get the
data to change the device’s behaviour (Vesalainen, Valkokari & Hellström, 2017). The
SNMP gadgets can underpin on the link, moderns, switches, switches, servers, workstations,
printers, and so on. The SNMP can be used for the manager to exchange the request to the
web server and router. The manager device can retrieve the data information and request the
manager by using the TCP and IP data on connecting with the IP address on the port, which
will be investigated.
2. Project Scenario
The project scenario can be specified on the network management device which
follows the stages like, Device Fault management, Device Configuration management,
Device accounting management, Device security management and Device performance
management. Network management device can consider the 5 small office manager devices
like, routers, printers, PC, web server, and switch can be connected with the TCP and IP
configuration. The scenario can follow the steps as follows:
 Get: The Manager device of the Get operation can be used for the request to send the
manager to the manager device. It can perform retrieving the data, to send the
manager device to the manager.
 GET request: The Get request can be used for the configuring the IP address on the
web server manager devices and it is used for the router connection to retrieve the
data on the MIB tree. It is utilized when initial get request is completed, for retrieving
the next object’s instance, either from any table or a list.
 SET: This activity has been utilized by the chiefs to change or allot the estimation of
the Managed gadget. It is used for setting the variable of a MIB on an agent.
 RAPS: Unlike the above directions which are started from the SNMP Manager,
TRAPS are started by the Agents. It is a flag to the SNMP Manager by the Agent on