Building Information Modelling: Project Execution and Collaboration

This presentation discusses the project execution of building construction and design in terms of collaboration relationship and influences. It also explores the different methods, processes, and technologies used in building information modelling.

Building information
modelling

Table of Contents
INTRODUCTION
TASKS
 Critically analyse and evaluate the project execution in the terms of collaboration
relationship and influences.
 Apply the appropriate methods, process and execution plans and specifications and
other technologies.
 Produce and present project material or artefacts on the relation of building
information modelling.
CONCLUSION
REFERENCES

INTRODUCTION
Building information modelling is basically the intelligent 3D model which provides the brief
architecture, construction and engineering the professional insight or tool. This is a process to
plan, construct, design and manage the infrastructure of buildings. This report will discuss
about the project execution of building construction and design in the terms of collaboration
relationship and influences. This report will describe the retrofit building by using BIM
model. This assignment will describe the different methods, process and technologies which
help for managing the entire process in proper manner. Furthermore, it will discuss about the
different materials and artefact that applicable in the building information modelling.

TASKS
Critically analyze and evaluate the project execution in the terms of collaboration
relationship and influences
 BIM is used as the facilitating collaboration between the project stakeholders. In this
way, it will be increased evidence towards the positive influences of building information
modelling project results.
 Sometimes, this building modelling project will help for retrofit building that manage the
entire architecture of building, construction industry and engineering.
 When BIM is used for retrofit building then it establishes a synchronisation between new
design and documentation drafting. It is not possbile without collaboration and influence
of different design attributes and designers.

Cont.
 Building information modelling is impact on the collaboration which help for reshaping
the individual cognitive determinates and also influence the other team members to
complete the task or framing the event pattern for delivering the project.
 The application of BIM to the retrofit existing building face challenges regarding the
information exchange.
 For accurate retrofit BIM is one of the effective method because it allows to analyse the
time dependency of constructuion activities so that safety errors and new design conflicts
can be identified and avoided.

Cont.
 Collaboration relationship and influences are necessary in between the project team between all
the parties. It is needed to the best way to deal with the information and move towards the
documentation of project database system.
 All the details and information can be analysis and directed by using building information
modelling that allow creating an effective integration between the team members and
information's.
 Sometimes, this model is linked with the federated model for removing all the clashes, detection
and managing the facility or marketing of business process.

Explain how can use the BIM for retrofit
building
 Building information modelling is applicable in the process of retrofit building existing
that help for managing the entire structure, ownership and age etc.
 It is considered to be the important for influence towards the framework. The benefits of
BIM application in the retrofit building to confirm the process by involvement of different
parties.

Cont..
 Building information modelling is created a proper life cycle stage and implementation into the
existing development. This life cycle is managed the process for designing the retrofit existing
building.
 This process will provide the proper visualization that assist to the designer where communicate
with residents.
 It also offered the solution in the social life and also achieve the sustainable approach. In this
way, it designer can be measured the accurate quantity of information which beneficial for
retrofit purpose.

Apply the appropriate methods, process and execution plans and
specifications and other technologies in the retrofit building
 Implementation of Building information modelling on the structure project- Retrofit Building is
used the BIM model which is based on the software modelling that integrated with the model of
geometrical on various type of materials. This model is used independent to analyze the entire data
processing in effective manner. Retrofit Building structure can be included the single model structure
to analyze the entire documentation and detailing of facts or figures. This includes different types of
features that allow managing in proper manner such as allocate the documentation construction of
each object, support the various type of data formats, generate the structural details and perform
multiple material modelling. It is important for Retrofit Building to divided into partition name such
as Retrofit Building families and Retrofit Building project.

Cont.
 On the other hand, Retrofit Building structure is creation of new object is possible in the
building information model. It also recognized the element of structure according to the
category of structural design. It is essential for automatically maintain the changes occur
in the development of project.
 The existing models of BIM for retofit buildings aims at reducing environmental
degradaton and to enhance their energy efficiency. It helps to retrofit in a cost effective
approach with better secuirty.

Cont.
 The object creation in building information model that involve the various type of
geometric characteristics. These objects are associated with the structure of information,
material types of existing building.
 It also contains the material list in their database system or customized the new material
in the project development. This design of retrofit building architecture is store the
building model for the future reference because it is more compatible with the different
software.

Cont.
 Ability to create new Building modelling objects- The geometric model is important in the project
development because it will help for translating the elements to create project in effective manner.
 In existing buildings BIM provides benefits such as quality control, moniotring, efficient
management of space and energy. Thus several tools such as laser scanning, tachometory and
geometrical drawings can be used for the retrofit purpose.
 In the Retrofit Building families, there are various type of menu applicable for creation of objects.
There are followings steps to manage the structure element to create new object in effective manner.

Cont.
 Create the object for retrofit.
 Choose the best geometric model for enhancing the structural and energy capabilites of
existing building.
 Used the references lines that shown as planes for implementing the different elements.
 Create the specified concrete blcoano for drawing the plans and creating their extrusion.
 It also defines the actual material of blcoano.

Cont.
 In the entire system, it can be identified the quantity the volume of concrete capital and
slab. It should be determine that new families applicable and also meet the expected
features of retrofit building.
 For the existing buildings the retrofit may not be efficiently planned and monitored with
the help of geometircal drawings only. Thus in such cases 3D laser technique can be used
by BIM so that past modifications can also be identified.

Cont.
 Reinforcements- Building information modelling is possible to structured in the
reinforcement details that designed about the retrofit building on the basis of their
structure.
 There are different level of possible with the help of 3-Dimension and 2- Dimensions
visualization of reinforcement in model which allows to adopted in carefully to manage
the structure pattern in effective manner. The tool is help for assist to develop the space
between the reinforcement bar in order to avoid the conflicts and duplications.

Cont.
 BIM tool is basically designed for overlapping the detect of bars. Reinforcement structure
is used the building information modelling to directly concrete the element and possible to
choose the right position of each and every bar for creation of retrofit building structure.
 This is the best process that allow providing the best solution and remove meshes between
the elements. This process is faster to automatically handle the entire budget of processing
and analyze the solution of reinforcement in the drawing structure.

Cont.
 Measurements, costs and quantities- The building information modelling is a method that
help for supporting the automated budget and also obtain the measurement of data, cost and
quantities etc.
 This methodology can be allowed for team members to retrofit on several ways such as
economically structural options and correction in the budgeting or changes occurs in the last
minute of project proposal.
 Sometimes, it is necessary for update the model in proper manner within the desirable
modifications. Building model is afforded for the high accuracy to detect all the possible threats
in order to measure the different element of structural and also leading to obtain the quantities
and measurement.

Produce and present project material or artefacts on the relation of BIM for
existing buildings
 Building information modelling enables for working as a methodology which help for change the
perceiving the artefacts applicable for delivered the project on the basis of construction stage and design.
The construction industry always try to maintain their materials, cost of products and also increasing the
quality or efficiency. Sometimes, it is challenges for company to collecting all the necessary information
for building process. The design is influenced the process to build an effective environment. Artefacts is the
specific method that adopt the information and develop new ideas between the communities. It also
considered to be lean perspectives to remove all the waste product in the production of materials. The waste
is identified in the term of lean such as over production, motion, rework, inventory and over processing etc.

Cont.
 Artefact is applicable in the building process to create final structure of project and
identify the need and requirement of elements. In this way, the final project can be meet
all requirement of project design.
 By using BIM the existing buildings can retrofit with better approach because BIM
provides better sources of data through digital insight. It prevents time and cost for the
subcontractors to measure the existing building.

Cont.
 Artefact model is basically generated the syntax in the contextual design to diagnosis the
practices and also follow the technique to describe the model in the building information
modelling. All the diagrams and flow charts are produced on the basis of artefact modelling.
 Though BIM is highly beneficial for the construction of new buildings but for the existing
retrofit building it can provide accurate project plan and enhanced collaboration between
various participants of the existing building. Thus optimization of cost and time makes it
effective for the retrofit.

Properties of artefacts applied in retrofit existing building by
using building information modelling-
 Physical and virtual form- it is an exist in the both the form like physical and virtual. Physical is help for
printing the drawings and construct the mock-ups. An artefact can be store the file in different formats such as
pdf, dwg etc.
 Accuracy- Many designers and developer worry about the artefacts like models, documents and images etc. It
is required the accuracy in the entire process that help for managing the overall structure in effective manner.
Accuracy is measured the condition of real world that reflect towards the actual position of structure. This is
more appropriate to easily identify the accuracy against towards the purpose of fit. Many times, it can be
increases issues in the information system which is sufficient for purpose. For Example- Artefacts can easily
determine the accurate the millimeter and planning according to the requirement of construction.

Cont..
 Objectiveness and fit for the purpose- An artefact would help for meeting all the issues
that generated in the project development. This will be help for control planning and
approval of permissions.
 Defect and clash control are the primary objectives for implementing BIM in existing
buildings. Thus it enables a path for retrofit in buildings.

Cont..
 Developer and Creator- An artefact are usually developer and creator which is likely to
be create team and performing different tasks individual. This will be constructed with the
help of construction to require the development process. Sometimes, developer can
change the process on the basis of need and requirement.

Cont..
 Method of Communication- Each and every construction design issues are represented
in the different ways. It is comprehensibility and clarity in the function of artefact. It is
necessary to generate the common understanding about the project and their issues. These
issues are based on the organization to exchange the information from the humans and
check the validation but it cannot be based on the machine checking. An artefact is
particularly designed on the basis of communication in effective manner.

Artefacts changes with the help of BIM adoption and
implementation- for existing buildings
 Building information modelling is associated with the change nature of artefacts which
produced the design in the construction industry. This will be adopted the new working
method and process by using the building model. It is extracted or filtered the artefacts
that provide the proper level of details which necessary for designing and development.
There are followings steps of artefacts that elaborate with the retrofit building by using
building information modelling.

Cont.
 An artefact elaborated that help for creating and developing the design solution and
understand in proper manner.
 An artefact is created to achieve their specific goals to approve the design structure of
project.
 An artefact is also known as life cycle of building model.

CONCLUSION
As per discussion, it concluded that Building information modelling is used in the project
development to manage the entire architecture, construction and engineering the professional
insight with the help of different tool and platforms.
In this way, it also plans, construct, design and manage the infrastructure of buildings. It
summarized that the project execution of building construction and design in the terms of
collaboration relationship and influences.
It summarized that describe the different methods, process and technologies which help for
managing the entire process in proper manner. It also concluded the different type of
materials and artefact that applicable in the building information modelling.

REFERENCES
Books and journals:
 Alwan, Z., Jones, P. and Holgate, P., 2017. Strategic sustainable development in the UK
construction industry, through the framework for strategic sustainable development, using
Building Information Modelling. Journal of Cleaner Production. 140. pp.349-358.
 Bhatija, V.P., Nithin, T. and Dawood, N., 2017. A preliminary approach towards
integrating knowledge management with building information modeling (KBIM) for the
construction industry. International Journal of Innovation, Management and
Technology. 8(1). pp.64-70.
 Fadeyi, M.O., 2017. The role of building information modeling (BIM) in delivering the
sustainable building value. International Journal of Sustainable Built Environment. 6(2).
pp.711-722.

Cont.
 He, Q. and et.al., 2017. Mapping the managerial areas of Building Information Modeling
(BIM) using scientometric analysis. International Journal of Project Management. 35(4).
pp.670-685.
 Lu, Y. and et.al., 2017. Building Information Modeling (BIM) for green buildings: A
critical review and future directions. Automation in Construction. 83. pp.134-148.
 Nishimura, Y. and et.al., International Business Machines Corp, 2018. Providing route
guide using building information modeling (BIM) data. U.S. Patent 9,939,274.