Professional Engineer Competency Units and Elements

This summary statement highlights the competency units and elements of a professional engineer and how they were applied in the career episodes. It includes knowledge and skill base, conceptual understanding of mathematics and physical sciences, ethical conduct, effective communication, and more.

PROFESSIONAL ENGINEER
Summary Statement
These are the competency Units and Elements.
Competency Element A brief summary of how you have applied the
element
Paragraph number in
the career episode(s)
where the element is
addressed
PE1 KNOWLEDGE AND SKILL BASE
PE1.1 Comprehensive,
theory-based
understanding of the
underpinning natural
and physical sciences
and the engineering
fundamentals
applicable to the
engineering discipline
I considered it as a quality milestone that the
secondary fuel should have same or greater
efficiency as compared to the ordinary fuels
I managed to develop the design that will allow air
suction not only from the foot but also suck the
impure materials from the rollers
I figured out steps can be taken for improving and
enhancing the braking system efficiency for
improving the figures of the road accidents and
allowing the drivers and the local community to
have a better environment on the roads
Career Episode 1: CE
1.2.1, CE 1.3.1 and CE
1.3.2
Career Episode 2: CE
2.3.1 and CE 2.3.3
Career Episode 3: CE
3.2.1, CE 3.3.1 and CE
3.3.2
PE1.2 Conceptual
understanding of the
mathematics,
numerical analysis,
statistics and
computer and
information sciences
which underpin the
I suggested to replace ait oxidizer with the HHO in
manner to enhance the efficiency and application of
the IC engines
I managed to execute the set of the operations as
per the model and allowing the accomplishment of
all the operations related to the project and deliver it
Career Episode 1: CE
1.3.1
Career Episode 2: CE
2.3.2, CE 2.3.3 and CE
2.3.4

engineering discipline
accordingly through the application of the
microcontroller
I selected the components those were necessary for
the project delivery and management of its
feasibility
Career Episode 3: CE
3.3.2
PE1.3 In-depth
understanding of
specialist bodies of
knowledge within the
engineering discipline
I calculated the energy in 1L of the HHO that can
be stored in limited volume of hydrogen within the
engine
I found that weight of the device was also
increasing due to the chamber being made for
installing the components
I identified that the soring acting on the control
element forces the closure device down into the
closed position on the valve seat
Career Episode 1: CE
1.3.2
Career Episode 2: CE
2.3.1, CE 2.3.4, CE
2.2.5 and CE 2.4.2
Career Episode 3: CE
3.3.1, CE 3.3.3
PE1.4 Discernment of
knowledge
development and
research directions
within the engineering
discipline
I developed the project schedule, budget,
communication pan, risk management and handled
all the major activities those were necessary for the
smooth and effective flow of the project
I used mild steel for managing the strength and the
organization of the established components
I used the solenoid valves in a manner that it can be
fitted for the extremely viscous or contaminated
process fluid through supplying the signal to
solenoid valve using the application of ECU
Career Episode 1: CE
1.2.5, CE 1.3.1 and
CE 1.4.2
Career Episode 2: CE
2.3.2, CE 2.3.4 and
CE 2.4.1
Career Episode 3: CE
3.3.2, CE 3.3.3 and CE
3.4.1
PE1.5 Knowledge of
contextual factors
impacting the
engineering discipline
I used HHO (hydroxyl or Browns Gas) gas as the
secondary fuel in this project
Career Episode 1: CE
1.2.1, CE 1.2.2,

I removed all the bolts and used welding for
combining all the components of the machine and
make it usable within the frequency of the vibration
developed during its working
I also analysed that if solenoid valve is 3/2 then
there will be only one outlet and if it is 5/2 then
there will be two outlets for single inlet
Career Episode 2: CE
2.2.1, CE 2.2.2
Career Episode 3: CE
3.2.1, CE 3.2.3
PE1.6 Understanding
of the scope,
principles, norms,
accountabilities and
bounds of
contemporary
engineering practice in
the specific discipline
I delivered the testing phase on the diesel engine
through using the HHO gas considering its
application in various sectors and wide utilization in
different industries
I placed the vacuum pump, air blower and motor
placed over the chamber
I identified that the soring acting on the control
element forces the closure device down into the
closed position on the valve seat
Career Episode 1: CE
1.2.3, CE 1.3.3, CE
1.3.4 and CE 1.3.2
Career Episode 2: CE
2.2.3, CE 2.3.1 and CE
2.3.2
Career Episode 3: CE
3.2.3, CE 3.3.1 and CE
3.3.2
PE2 ENGINEERING APPLICATION ABILITY
PE2.1 Application of
established
engineering methods
to complex
engineering problem
solving
I developed a project that can be energy efficient
and effective in managing the IC engines
combustion and functioning
I designed and delivered the fabrication of the
developed project in manner to propose an effective
and efficient project that can meet the necessary
goals and objectives
I used 5/2 outlet from solenoid valve that is/is
directly connected to the pneumatic cylinder with
Career Episode 1: CE
1.2.4, CE 1.3.1 and
1.4.1
Career Episode 2: CE
2.3.3, CE 2.3.4 and
CE 2.4.1, CE 2.4.2
Career Episode 3: CE
3.3.1, CE 3.3.2 and CE

the help of hose and was helpful in routing the
compressed air
3.4.2
PE2.2 Fluent
application of
engineering
techniques, tools and
resources
I contributed in the development of a project that is
energy efficient and can be environment healthy
that previous approaches
I managed to develop a four legged frame of mild
steel with the dimension 12”*30” that can be
effective and efficient enough for supporting the
whole model and accommodating the establishment
of the components
I would have kept the project completely
mechanically functioning and that could not be
much more automated as the sensors were essential
for the automated factors of braking system
Career Episode 1: CE
1.3.3, CE 1.3.2 and CE
1.3.1
Career Episode 2: CE
2.3.1, CE 2.3.2 and CE
2.3.3
Career Episode 3: CE
3.3.1, CE 3.3.2 and CE
3.3.3
PE2.3 Application of
systematic engineering
synthesis and design
processes
I performed the test on four stroke diesel engine
through mechanical load using diesel engine
I used the mild steel for fabricating the machine as
it was designed for the particular and effective
delivery of the project
I had to deliver the necessary deliveries within the
team. Every member of the team was responsible of
different sections of the project as there were other
sectors too other than designing of the developed
automatic braking system
Career Episode 1: CE
1.2.3, CE 1.3.1 and CE
1.3.2
Career Episode 2: CE
2.3.3 and CE 2.3.4
Career Episode 3: CE
3.2.5
PE2.4 Application of
systematic approaches
to the conduct and
management of
engineering projects
I developed the design of the HHO generator
I communicated with the team members regarding
this opinion and after comparison and discussion it
Career Episode 1: CE
1.3.1 and CE 1.3.2
Career Episode 2: CE
2.2.3, CE 2.3.1, CE

was finalized to use mild steel material for shafts,
frame and enclosure
I used photoelectric distance measuring sensors for
calculating the distance, electronic control, single
acting hydraulic cylinder, sensors, and hydraulic
circuit
2.3.2 and CE 2.3.3
Career Episode 3: CE
3.3.1 and CE 3.3.2
PE3 ENGINEERING APPLICATION ABILITY
PE3.1 Ethical conduct
and professional
accountability
I gathered the results after testing that was
satisfactory
I regularly monitored the entire project and made
sure that every team member deliver their sector of
the job without altering the expected outcome
I installed the sensor that can be efficient for
measuring the hurdles till 10m and take better
decision-making for the vehicles assuring less
accidents
Career Episode 1: CE
1.2.3, CE 1.3.3 and CE
1.4.1
Career Episode 2: CE
2.2.3, CE 2.3.5 and CE
2.4.2
Career Episode 3: CE
3.3.3, CE 3.4
PE3.2 Effective oral
and written
communication in
professional and lay
domains
I tested the proposed transformation
I also kept the size of the machine portable
considering the customer acceptance
I was also responsible for evaluating the developed
project in the real world application and make sure
that the project is feasible and efficient enough for
the management and delivery of the expected
outcomes that was to restrict the number of
Career Episode 1: CE
1.2.3, CE 1.3.3 and CE
1.4.1
Career Episode 2: CE
2.2.3, CE 2.3.5 and CE
2.4.2
Career Episode 3: CE
3.3.3, CE 3.4

accidents
PE3.3 Creative
innovative and
proactive demeanour
I managed designing and testing of the proposed
modification of the oxidizer and tried to make the
system efficient and long running device
I managed all the project constraints and delivered
the project within the estimated timeline, budget,
and quality
The project aims to distinguish between systems
currently in production like traction control (TC),
electronic brake force distribution (EBD), brake
assist (BA) and electronic stability control (ESC)
functions and future systems that are currently in
development
Career Episode 1: CE
1.3, CE 1.4 and CE
1.4.2
Career Episode 2: CE
2.3.5, CE 2.4, CE 2.2.5
and CE 2.4.2
Career Episode 3: CE
3.2, CE 3.3
PE3.4 Professional use
and management of
information
I also performed the performance test of the four
stroke diesel engine using the HHO gas and
gathered following results
I developed an effective machine that can remove
dust easily and allow deodorizing that was the
accomplishment of the project aim
I installed a plunger that connects the closure
device to the control element of the actuator
Career Episode 1: CE
1.2.3, CE 1.2.5, CE
1.4.2
Career Episode 2: CE
2.2.3, CE 2.2.5, CE
2.4.2
Career Episode 3: CE
3.2.3, CE 3.2.5, CE
3.4.2
PE3.5 Orderly
management of self,
and professional
conduct
I identified that the safety bubbler should be
withstanding and flexible considering the little bit
pressure and the vibration; it should also transparent
and should be at height
I chose to design and fabrication of the automatic
foot dust removal machine
Career Episode 1: CE
1.4.1, CE 1.3.1 and CE
1.3.2
Career Episode 2: CE
2.4.2, CE 2.3.2, CE

I was responsible for the delivery of the entire
project and the final output of the project.
2.3.3 and CE 2.3.4
Career Episode 3: CE
3.4.2, CE 3.3.1 and CE
3.3.2
PE3.6 Effective team
membership and team
leadership
I dipped the generated gas after electrolysis through
HHO generator into the level below the water and
thereafter, kept the outgoing tube at the top of the
bottle and tighten all the arrangements
I identified certain problems or issues along with
their remedies those might have altered the entire
project and thus, could possibly influence the
project delivery
I had to make sure that both the phases of the
project including mechanical and electrical is being
delivered in an effective and efficient manner and
all the expected outcomes are being managed in an
efficient and effective manner
Career Episode 1: CE
1.4.1, CE 1.4.2
Career Episode 2: CE
2.4.1 and CE 2.4.2
Career Episode 3: CE
3.4.1 and CE 3.4.2