Professional Engineering: Summary Statement Project Report 2022

Professional Engineering: Summary Statement
Competency Element
A brief summary of how
you have applied the
element
Paragraph number in the
career episode(s) where the
element is addressed
PE 1 KNOWLEDGE AND SKILL BASE
PE1.1 Comprehensive,
theory based
understanding of the
underpinning natural
and physical sciences
and the engineering
fundamentals applicable
to the engineering
discipline.
1. The project report was
for Optimization of
Machining Parameters on
Electrochemical Micro
Machining of Hastelloy C22
using Taguchi-Grey
Relational Analysis. I have
successfully evaluated the
complete efficiency of my
expected outcome.
2. The second project report
was for Effect of Nano
Zerconium Coating on the
SS316L Bio Implant Material.
Career Episode 1.1, Career
Episode 1.2, Career Episode
1.3, Career Episode 1.4.
Career Episode 2.2.1, 2.2.2,
2.2.3, 2.2.4 and 2.3.1, 2.3.2
and 2.3.3
Career Episode 3.1, Career
Episode 3.2, Career Episode

3. The third project report was
for Design and Fabrication of
Electro Magnetic Engine.
3.3 and Career Episode 3.4
PE1.2 Conceptual
understanding of the
mathematics, numerical
analysis, statistics, and
computer and
information sciences,
which underpin the
engineering discipline.
I comprise of the core
capabilities related to critical
thinking power as well as
problem solving that I had to
successfully apply in these
projects. In the 3 mechanical
projects, I ensured that my
knowledge of mathematics
and numerical analysis is
being applied.
Career Episode 1.3.1,
2.3.1and 3.3.1
PE1.3 In-depth
understanding of
specialist bodies of
knowledge within the
engineering discipline
1. For this project of
Optimization of Machining
Parameters on
Electrochemical Micro
Machining of Hastelloy C22
using Taguchi-Grey
Relational Analysis, I
comprised of the in depth
familiarity of machining
parameters, Taguchi method
and Hastelloy C22.
Career Episode 1.3.1, 1.3.2
and Career Episode 1.3.3
CE 2.3.3, 2.3.2 and 2.3.1
CE 3.3.3, 3.3.2 and 3.3.1

2. For the project of Effect of
Nano Zerconium Coating on
the SS316L Bio Implant
Material, I had applied the in
depth familiarity of Nano
Zerconium and stainless steel
alloys.
3. For the project of Design
and Fabrication of Electro
Magnetic Engine, I had
applied my knowledge of
electromagnetic engine and 2
stroke engine.
PE1.4 Discernment of
knowledge development
and research directions
within the engineering
discipline
I had tested and customized
the products. Moreover, I
even had to perform various
testing using experimental
methods.
CE 1.3.3, 1.3.4 and 1.3.5
CE 2.3.4, 2.3.3 and 2.3.5
CE 3.3.4, 3.3.3 and 3.3.5
PE1.5 Knowledge of
contextual factors
impacting the
engineering discipline.
The fault stimulations were
identified in the project and
proper efficient outputs were
obtained.
CE 1.3.1 and 1.3.2
CE 2.3.1 and 2.3.2
CE 3.3.1 and 3.3.2

PE1.6 Understanding of
the scope, principles,
norms, accountabilities
and bounds of
contemporary
engineering practice in
the specific discipline
I had to maintain good
relations with my team
members and this was helpful
in diminishing the problems
of projects. I undertook the
contemporary engineering
practice within my project.
CE 1.3.1 and 1.3.2
CE 2.1.1, 2.3.1 and 2.3.2
CE 3.1.1, 3.3.1 and 3.3.2
PE 2 ENGINEERING APPLICATION ABILITY
PE2.1 Application of
established engineering
methods to complex
engineering problem
solving
I provided proper design after
solving the issues faced in
first attempt. I have applied
various software for
executing the three projects.
CE 1.3.2, 1.3.3, 2.3.2, 2.3.3,
3.3.2 and 3.3.3
PE2.2 Fluent application
of engineering
techniques, tools and
resources.
Few important engineering
techniques like structural
analysis, Taguchi method that
I have to utilize in these
project was being enumerated
with incredible articulacy.
CE 1.3.5, 1.3.2, 2.3.2, 2.3.5,
3.3.2 and 3.3.5
PE2.3 Application of
systematic engineering
synthesis and design
processes.
I have used my acute
familiarity of systematic
engineering synthesis. Hence,
the designing of the projects
CE 1.3.1, 2.3.1 and 3.3.1

were done easily.
PE2.4 Application of
systematic approaches to
the conduct and
management of
engineering projects
The three projects required
the considerations of few
destructive operation
conditions that were needed
for the applications.
CE 1.3.3, 1.3.1, 2.3.3, 2.3.1,
3.3.3 and 3.2.1
PE 3 PROFESSIONAL AND PERSONAL ATTRIBUTES
PE3.1 Ethical conduct
and professional
Accountability
1. I had to ensure that I was
being logical and ethical in
every project, thus my ethics
related conduct as well as
professional accountability
was eventually maintained.
2. The codes of conduct were
being followed by me for
executing this project
properly and hence I was
successful in completing my
work.
3. I have maintained work
ethics and made sure that I
have also maintained them in
this project.
Career Episode 1.3.2, 1.3.3,
2.3.2, Career Episode 2.3.3,
Career Episode 3.3.2 and
Career Episode 3.3.3

PE3.2 Effective oral and
written communication
in professional and lay
domains
I have fluency in few major
languages and have excellent
written communication skills
for the professional fields.
CE 1.3.2, 1.3.3, 1.3.4, 1.3.5,
2.3.2, 2.3.3, 2.3.4, 2.3.5,
3.3.2, 3.3.3, 3.3.4 and 3.3.5
PE3.3 Creative,
innovative and pro-
active demeanour
I being quite inventive
eventually provided advanced
ideas for project execution.
CE 1.1, 1.3.3, 2.1, 2.3.3, 3.1
and 3.3.3
PE3.4 Professional use
and management of
information
1. Although I had to come
through several issues, I used
my subsequent professional
skill as well as intellect to
solve them, hence was being
successful to achieve them.
2. As I had managerial skills,
I have the ability to manage
the entire team and in absence
of my supervisor, I showed
my managerial skills here.
3. I am successfully using my
professional and management
skills to manage the
confidential information.
CE 1.3.3, 1.3.4.1, 1.3.4.2,
1.3.5, 2.3.3, 2.3.4.1, 2.3.4.2,
2.3.5, 3.3.3, 3.3.4.1, 3.3.4.2
and 3.3.5
PE3.5 Orderly 1. I managed the professional CE 1.3.3, 1.3.4, 1.3.5, 2.3.3,

management of self and
professional conduct
conduct and managed myself
as well as my other team
members.
2. With the help of work
ethics and managerial skills, I
had managed myself in this
project properly and given
work progress report to my
supervisor.
3. I took regular follow ups of
the project for checking
whether the project was being
executed as per planning or
not.
2.3.4, 2.3.5, 3.3.3, 3.3.4, and
3.3.5
PE3.6 Effective team
membership and team
leadership
1. This project was completed
with excellent team work and
proper team leadership.
2. I have excellent leadership
skills; and in the absence of
my project supervisor, I
managed the team.
3. Being the project developer
in this project, I had
Career Episode 1.4.4, 1.4.5,
1.4.6, 1.5, Career Episode
2.4.4, 2.4.5, 2.4.6, 2.5 and
Career Episode 3.4.4, 3.4.5,
3.4.6, 3.5

completed the work by
providing a proper design of
the temperature controller
system.