Professional Engineering: Summary Statement Assignment 2022

Professional Engineering: Summary Statement
Competency Element
A brief summary of how
you have applied the
element
Paragraph number in the
career episode(s) where the
element is addressed
PE 1 KNOWLEDGE AND SKILL BASE
PE1.1 Comprehensive,
theory based
understanding of the
underpinning natural
and physical sciences
and the engineering
fundamentals applicable
to the engineering
discipline.
1. The project report was
for 160 Hops Short Range
Microwave links -- Aviat
Eclipse INU Access Links. I
have evaluated the complete
efficiency of my expected
outcome.
2. The second project report
was for Long haul Microwave
Backbone Links Project -
OptiX RTN 980L.
3. The third project report was
for 10 GBits/ s Transport
Ring Network OptiX OSN
Career Episode 1.1, Career
Episode 1.2, Career Episode
1.3, Career Episode 1.4 and
Career Episode 1.5.
Career Episode 2.2.1, 2.2.2,
2.2.3, 2.2.4 and 2.3.1, 2.3.2
and 2.3.3

3500. Career Episode 3.1, Career
Episode 3.2, Career Episode
3.3 and Career Episode 3.4
PE1.2 Conceptual
understanding of the
mathematics, numerical
analysis, statistics, and
computer and
information sciences,
which underpin the
engineering discipline.
I comprise of the core
capabilities related to critical
thinking power as well as
problem solving that I had to
successfully apply in these
projects.
In the first project, I have
considered INU and different
plug in cards like NCC, DAC,
AUX, NPC and PCC.
In the second project, I have
considered the Optix RTN
980L, which provides large
capacity and supports long
haul radio transmission.
In the third project, I have
designed fibre cable layout
and planned appropriate sites
to place the fibre switches and
installed 300mm deep
Career Episode 1.3.1,
2.3.1and 3.3.1

ETS300 119 standard cabinet.
PE1.3 In-depth
understanding of
specialist bodies of
knowledge within the
engineering discipline
1. For this project of 160
Hops Short Range Microwave
links -- Aviat Eclipse INU
Access Links, I comprised of
the in depth familiarity of
Aviat Eclipse INU access and
short range microwave links.
With proper analysis, I was
able to install vertically
polarized antennas and
connecting DAC16E1 card
for all INUs.
2. For this project of Long
haul Microwave Backbone
Links Project - OptiX RTN
980L, I had applied the in
depth familiarity of
microwave links and OptiX
RTN. I had to direct mounting
dual polarized microwave
antennas over the towers.
3. For the project of 10 GBits/
s Transport Ring Network
Career Episode 1.3.1, 1.3.2
and Career Episode 1.3.3
CE 2.3.3, 2.3.2 and 2.3.1
CE 3.3.3, 3.3.2 and 3.3.1

OptiX OSN 3500, I had
applied my knowledge of
telecommunications and
networking and as a result, I
have used SL16 for SDH
processing interface, BA2 for
optical booster amplification
board, DCU for dispersion
compensation board, EU08
for SDH interface board, and
10GE optical interface for
convergence layer ring.
PE1.4 Discernment of
knowledge development
and research directions
within the engineering
discipline
I had tested and customized
the products. Moreover, I
even had to perform various
testing using software.
Different aspects of
microwave links (both short
range and long haul) and
transport rings were
considered in the projects. In
the 1st project, I served voice
and data services like 3G, 4G
and ISP.
In the 2nd project, I had to
CE 1.3.3, 1.3.4 and 1.3.5
CE 2.3.4, 2.3.3 and 2.3.5
CE 3.3.4, 3.3.3 and 3.3.5

perform EPLA configurations
using the iManager 2000
software.
In the 3rd project, I have used
E-line services carried by
ports to transport voice and
data services in different
stations. I even applied E-line
services for distinguishing
services with similar VLANs.
PE1.5 Knowledge of
contextual factors
impacting the
engineering discipline.
The fault stimulations were
identified in the project and
proper efficient outputs were
obtained. Moreover, I even
focused on the calculations
for ensuring that the project
outcomes were appropriate.
In the 2nd project, I arranged
to configure SD combination
technology as RFU supported
it for implementing the work.
In the 3rd project, I had to
install a two fibre
bidirectional MSP ring
CE 1.3.1 and 1.3.2
CE 2.3.1 and 2.3.2
CE 3.3.1 and 3.3.2

network for eliminating
traffic congestion.
PE1.6 Understanding of
the scope, principles,
norms, accountabilities
and bounds of
contemporary
engineering practice in
the specific discipline
I had to maintain good
relations with my team
members and this was helpful
in diminishing the problems
of projects. I undertook the
contemporary engineering
practice within my project.
CE 1.3.1 and 1.3.2
CE 2.1.1, 2.3.1 and 2.3.2
CE 3.1.1, 3.3.1 and 3.3.2
PE 2 ENGINEERING APPLICATION ABILITY
PE2.1 Application of
established engineering
methods to complex
engineering problem
solving
I provided proper design after
solving the issues faced in
first attempt. I have applied
various software for
executing the three projects.
For the projects of short range
and long haul microwave
links, I had to consider
different distances for placing
the hops and for the ring
transport network, I used
TDM.
CE 1.3.2, 1.3.3, 2.3.2, 2.3.3,
3.3.2 and 3.3.3
PE2.2 Fluent application
of engineering
Few important engineering
techniques like structural
CE 1.3.5, 1.3.2, 2.3.2, 2.3.5,

techniques, tools and
resources.
analysis, WebLCT software
that I have to utilize in these
project was being enumerated
with incredible articulacy. I
have even applied various
significant software and inter
personal communication
skills. 160 hops were used in
the short range microwave
links or Aviat Eclipse INU
links.
For the second project, I have
used OptiX RTN 980L and in
the third project, I have used
OptiX OSN 3500 as a
transmission network project
engineer. Moreover, I have
used the software of iManager
U2000 for configuring IF-
Ethernet ports.
In the third project, I had to
configure services for SDH
with two fibre bidirectional
MSP.
3.3.2 and 3.3.5

PE2.3 Application of
systematic engineering
synthesis and design
processes.
I have used my acute
familiarity of project
management and software.
Hence, the designing of the
projects were done easily.
The fibre cable layout was
being considered as well as
system configuration was
executed as per standards. To
create CES services, I had to
configure PDH, E1 and SDH
card ports.
CE 1.3.1, 2.3.1 and 3.3.1
PE2.4 Application of
systematic approaches to
the conduct and
management of
engineering projects
The three projects required
the considerations of few
destructive operation
conditions that were needed
for the applications.
CE 1.3.3, 1.3.1, 2.3.3, 2.3.1,
3.3.3 and 3.2.1
PE 3 PROFESSIONAL AND PERSONAL ATTRIBUTES
PE3.1 Ethical conduct
and professional
Accountability
1. I had to ensure that I was
being logical and ethical in
every project, thus my ethics
related conduct as well as
professional accountability
Career Episode 1.3.2, 1.3.3,
2.3.2, Career Episode 2.3.3,
Career Episode 3.3.2 and
Career Episode 3.3.3

was eventually maintained.
2. The codes of conduct were
being followed by me for
executing this project
properly and hence I was
successful in completing my
work.
3. I have maintained work
ethics and made sure that I
have also maintained them in
this project.
PE3.2 Effective oral and
written communication
in professional and lay
domains
I have fluency in few major
languages and have excellent
written communication skills
for the professional fields.
CE 1.3.2, 1.3.3, 1.3.4, 1.3.5,
2.3.2, 2.3.3, 2.3.4, 2.3.5,
3.3.2, 3.3.3, 3.3.4 and 3.3.5
PE3.3 Creative,
innovative and pro-
active demeanour
I being quite inventive
eventually provided advanced
ideas for project execution.
CE 1.1, 1.3.3, 2.1, 2.3.3, 3.1
and 3.3.3
PE3.4 Professional use
and management of
information
1. Although I had to come
through several issues, I used
my subsequent professional
skill as well as intellect to
solve them, hence was being
CE 1.3.3, 1.3.4.1, 1.3.4.2,
1.3.5, 2.3.3, 2.3.4.1, 2.3.4.2,
2.3.5, 3.3.3, 3.3.4.1, 3.3.4.2
and 3.3.5

successful to achieve them.
2. As I had managerial skills,
I have the ability to manage
the entire team and in absence
of my supervisor, I showed
my managerial skills here.
3. I am successfully using my
professional and management
skills to manage the
confidential information.
PE3.5 Orderly
management of self and
professional conduct
1. I managed the professional
conduct and managed myself
as well as my other team
members.
2. With the help of work
ethics and managerial skills, I
had managed myself in this
project properly and given
work progress report to my
supervisor.
3. I took regular follow ups of
the project for checking
whether the project was being
CE 1.3.3, 1.3.4, 1.3.5, 2.3.3,
2.3.4, 2.3.5, 3.3.3, 3.3.4, and
3.3.5

executed as per planning or
not.
PE3.6 Effective team
membership and team
leadership
1. This project was completed
with excellent team work and
proper team leadership.
2. I have excellent leadership
skills; and in the absence of
my project supervisor, I
managed the team.
3. Being the project developer
in this project, I had
completed the work by
providing a proper design of
the temperature controller
system.
Career Episode 1.4.4, 1.4.5,
1.4.6, 1.5, Career Episode
2.4.4, 2.4.5, 2.4.6, 2.5 and
Career Episode 3.4.4, 3.4.5,
3.4.6, 3.5