Professional Engineering: Summary Statement

This document provides a summary statement for a professional engineering project, highlighting the application of competency elements in various career episodes. The project covers topics such as knowledge and skill base, conceptual understanding, in-depth knowledge, discernment of knowledge development, contextual factors, engineering application ability, systematic engineering synthesis and design processes, professional and personal attributes, and effective team membership and leadership.

Professional Engineering: Summary Statement
Competency Element
A brief summary of how
you have applied the
element
Paragraph number in the
career episode(s) where the
element is addressed
PE 1 KNOWLEDGE AND SKILL BASE
PE1.1 Comprehensive,
theory based
understanding of the
underpinning natural
and physical sciences
and the engineering
fundamentals applicable
to the engineering
discipline.
1. This project report was
based on Assistance Vision
for Blind People using k-NN
Algorithm and Raspberry Pi. I
have evaluated the complete
efficiency of my expected
outcome.
2. This particular project
report was based on the
Design and Analysis of Three
Concentric Half Ring
Microstrip Patch Antenna.
3. This particular project
report was based on Tracing
CE 1.1, CE 1.2 and CE 1.3
CE 2.1, CE 2.2 and CE 2.3
CE 3.1, CE 3.2 and CE 3.3

Down the Vehicle using GSM
and GPS.
PE1.2 Conceptual
understanding of the
mathematics, numerical
analysis, statistics, and
computer and
information sciences,
which underpin the
engineering discipline.
I have the abilities of critical
thinking and problem solving
that I have successfully
applied in this project.
CE 1.3.1
CE 2.3.1
CE 3.3.1
PE1.3 In-depth
understanding of
specialist bodies of
knowledge within the
engineering discipline
1. For the project of OCR, I
had the in depth knowledge of
digital image processing.
2. For the project of design of
Half Ring Microstrip Patch
Antenna, I had applied the in
depth knowledge of antennas
and microprocessors.
3. For the project of tracing of
vehicle with GPS and GSM, I
had applied my knowledge of
GPS.
CE 1.3.1 and CE 1.3.3
CE 2.3.1 and CE 2.3.3
CE 3.3.1 and CE 3.3.3
PE1.4 Discernment of I had tested and customized CE 1.3.3 and CE 1.3.5

knowledge development
and research directions
within the engineering
discipline
the products. Moreover, I
even had to perform various
testing using software.
CE 2.3.3 and CE 2.3.5
CE 3.3.3 and CE 3.3.5
PE1.5 Knowledge of
contextual factors
impacting the
engineering discipline.
The fault stimulations were
identified in the project and
proper efficient outputs were
obtained.
CE 1.3.1, CE 1.3.2
CE 2.3.1, CE 2.3.2
CE 3.3.1, CE 3.3.2
PE1.6 Understanding of
the scope, principles,
norms, accountabilities
and bounds of
contemporary
engineering practice in
the specific discipline
I maintained good relation
with my colleagues and this
helped to diminish the issues
of the projects. I undertook
the contemporary engineering
practice within my project.
CE 1.1, CE 1.3.1 and CE
1.3.2
CE 2.1.1, CE 2.3.1 and CE
2.3.2
CE 3.1.1, CE 3.3.1 and CE
3.3.2
PE 2 ENGINEERING APPLICATION ABILITY
PE2.1 Application of
established engineering
methods to complex
engineering problem
solving
I provided proper design after
solving the issues faced in
first attempt. I have applied
various software for
executing the three projects.
CE 1.3.3
CE 2.3.3
CE 3.3.3
PE2.2 Fluent application The engineering techniques CE 1.3.2 and CE 1.3.5

of engineering
techniques, tools and
resources.
like image processing, circuit
integration, microprocessors
and circuit designing that I
had utilized in these project
were solely registered with
tremendous fluency. I have
even applied various
significant software and inter
personal communication
skills.
CE 2.3.2 and CE 2.3.5
CE 3.3.2 and CE 3.3.5
PE2.3 Application of
systematic engineering
synthesis and design
processes.
I have applied my acute
knowledge of project
management and software.
Hence, the designing of the
projects were done easily.
CE 1.3.1, CE 2.3.1 and CE
3.3.1
PE2.4 Application of
systematic approaches to
the conduct and
management of
engineering projects
The three projects required
the considerations of few
destructive operation
conditions that were needed
for the applications.
CE 1.3.3 and CE 1.3.1
CE 2.3.3 and CE 2.3.1
CE 3.3.3 and CE 3.2.1
PE 3 PROFESSIONAL AND PERSONAL ATTRIBUTES
PE3.1 Ethical conduct
and professional
Accountability
1. I made sure that I was
extremely ethical during all
the projects and thus my
CE 1.3.2, CE 1.3.3, CE 2.3.2,
CE 2.3.3, CE 3.3.2 and CE

ethical conduct and
professional accountability
was maintained.
2. The codes of conduct were
being followed by me for
executing this project
properly and hence I was
successful in completing my
work.
3. I have maintained work
ethics and made sure that I
have also maintained them in
this project.
3.3.3
PE3.2 Effective oral and
written communication
in professional and lay
domains
I have fluency in three major
languages and have excellent
written communication skills
for the professional fields.
CE 1.3.3, CE 1.3.4, CE 1.3.5,
CE 2.3.3, CE 2.3.4, CE 2.3.5,
CE 3.3.3, CE 3.3.4 and CE
3.3.5
PE3.3 Creative,
innovative and pro-
active demeanour
I was extremely creative and
provided innovative ideas for
the betterment of the projects.
CE 1.3.3, CE 2.3.3 and CE
3.3.3
PE3.4 Professional use
and management of
information
1. Although I came across
various problems, I utilized
my professional skills and
CE 1.3.3, CE 1.3.4, CE 1.3.5,
CE 2.3.3, CE 2.3.4, CE 2.3.5,
CE 3.3.3, CE 3.3.4 and CE

intellect for solving them and
thus was successful in
achieving them.
2. As I had managerial skills,
I have the ability to manage
the entire team and in absence
of my supervisor, I showed
my managerial skills here.
3. I am successfully using my
professional and management
skills to manage the
confidential information.
3.3.5
PE3.5 Orderly
management of self and
professional conduct
1. I managed the professional
conduct and managed myself.
2. With the help of work
ethics and managerial skills, I
had managed myself in this
project properly and given
work progress report to my
supervisor.
3. I took regular follow ups of
the project for checking
whether the project was being
CE 1.3.3, CE 1.3.4, CE 1.3.5,
CE 1.3.4, CE 2.3.3, CE 2.3.4,
CE 2.3.5, CE 2.3.4 CE 3.3.3,
CE 3.3.4, CE 3.3.4 and CE
3.3.5

executed as per planning or
not.
PE3.6 Effective team
membership and team
leadership
1. This project was completed
with excellent team work and
proper team leadership.
2. I have excellent leadership
skills; and in the absence of
my project supervisor, I
managed the team.
3. Being the project developer
in this project, I had
completed the work by
providing a proper design of
the temperature controller
system.
CE 1.4.4, CE 2.4.4 and CE
3.4.4