Ask a question from expert

Ask now

Design of RFID Tag Antenna matched to Micro Chip

9 Pages1615 Words161 Views
   

Charles Sturt University

   

Competency Demonstration Report (ITC 493)

   

Added on  2020-03-04

About This Document

ITC 493 - The project report on the design of a Radio Frequency Identification (RFID) Antenna. We created the antenna to increase the theoretical and practical value of the RFID system. The paper also discusses its responsibilities, engineering knowledge, and skills, as well as identified problems and solutions.

Design of RFID Tag Antenna matched to Micro Chip

   

Charles Sturt University

   

Competency Demonstration Report (ITC 493)

   Added on 2020-03-04

BookmarkShareRelated Documents
CompetencyDemonstration ReportCareer Episode 1
Design of RFID Tag Antenna matched to Micro Chip_1
CE 1.1 Project InformationName of the project: Design of RFID Tag Antenna matched to Micro ChipLocation of the project: (Please fill)Project Duration: (Please fill)Organization: (Please fill)Role and Designation during the time: Telecommunication Network EngineerCE 1.2 Project BackgroundCE 1.2.1 Characteristics of the projectI had conducted the project on design of Radio Frequency Identification (RFID) Antennawhich is a part of integrated RFID system matched to micro chip. I had developed the antenna togain theoretical importance and realistic value of RFID system. I had used of RFID technologyfor conducting the project work which uses of radio waves to transmit information storedconcerning the identified commands. I had used the commands to identify the object via spacecoupling or electromagnetic wave propagation. It is a fundamental device to transmit RF powerfrom radio transceiver to unlock space in form of the electromagnetic waves. I had analyzed thatantenna is a great part of RF system and therefore its performance affects the performance ofentire system. I had conducted this study as design of RFID tag antenna is key important and itsdesign is focused on frequency bands.
Design of RFID Tag Antenna matched to Micro Chip_2
CE 1.2.2 Objectives developed for the projectFollowing are the objectives of the project study:To design of RFID tag antenna matched to micro chipTo calculate the power received by the RFID tag and reader antennaTo analyze the tag antenna based on various functions of RFID system CE 1.2.3 My area of workI had conducted study on the tag antenna based on various functions of RFID system. Ihad analyzed that the tag antenna transmits wave carrying of information which are stored intothe tag, but it also requires catching wave from the reader to provide of energy for the tagoperations. I had attached the tag to identified objects, the tag size is small and also antenna’ssize becomes small. The tag antenna consists of omnidirectional radiation with impedance is not50 ohm. I had determined that the antenna realizes conjugate match with the tag chip to provideof maximum power towards the tag chip. CE 1.2.4 Project GroupHead of the DepartmentProject SupervisorProject team member 1(My role)
Design of RFID Tag Antenna matched to Micro Chip_3

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
Conceptual Understanding of the Mathematic
|9
|1558
|49

Project on Coefficient of Reflection Power for Antenna
|10
|1827
|97

Competency Demonstration Report (CDR) | Assignment
|8
|1715
|107

Working of Radio Frequency Identification (RFID)
|10
|2235
|202

RFID (Radiofrequency Identification) Technology | Report
|8
|1644
|103

Study on Radio Frequency Identification
|11
|2382
|328