System Science and Engineering

System Science and
Engineering

Table of Contents
1. Introduction............................................................................................................................2
2. Preliminary design.................................................................................................................2
3. Detailed design........................................................................................................................3
4. Production phases...................................................................................................................5
5. System test...............................................................................................................................7
6. Evaluation...............................................................................................................................8
7. Validation processes...............................................................................................................8
8. Human factors........................................................................................................................8
9. Optimization...........................................................................................................................9
10. Recommendations...............................................................................................................9
11. Conclusion...........................................................................................................................9
References.....................................................................................................................................10
1

1. Introduction
Q1 is a tall landmark building located in Queensland. It has more number of floors mainly
designed for commercial use. The design of Q1 involves stages of design such as conceptual
design, preliminary design, and detailed design. General criteria for the design are stability and
strength. The structural drawing of Q1 tower enable engineers to construct Q1 tower with
stability. In any design project, next to the conceptual design phase, preliminary and detailed
design takes part. The preliminary and the detailed design part makes sure that the project is
standard and will be within the acceptable budgets and costing. The detailed design phase of Q1
provides enough ideas for project investors and for the development team to provide tough
design.
The preliminary design, detailed design phase of Q1 will be analyzed. The production
phases, system test of Q1 will be investigated and provided. The validation process of Q1 design
will be examined and provided. The human factors and the optimization will be studied and
provided. The infrastructure design aspects of Q1 will be studied. Suitable recommendations will
be made finally.
2. Preliminary design
Generally, the preliminary design is the initial step of the design concept. The preliminary
design of Q1 takes to the design view of Q1. The interfaces of Q1 design are created both way.
The interface of the design Q1 (Construction, 2017).
The primary process of the preliminary design considered to the baseline requirements and
description from a contract between the development team and requirements definition team. In
preliminary design phase, member of the development group describes the design construction
and that will meet the design of system specification (Sirigiri, 2014). This phase organize the
desires and requirements into main subsystems and choose a best design plan from among
possible replacements. Internal and external designs are defined to the subsystem level and the
design of high level objects and functions are specified. The preliminary design report defines
the high level design of the building construction. This design phase concludes in the PDR
(Preliminary Design Review), where the development group correctly presents the plan design
2

for evaluation part (Paulino, 2010). The design principles and outline design procedures are
applied to the preliminary design.
The architecture design of the Q1 tower is developed based on the requirements of consumer and
use cases. The relevant report of the design interface, relationship diagrams and design report of
Q1 tower are included in the preliminary design of the system (Skyscrapercenter.com, 2017).
The floor plan of Q1 tower increases the architecture development and certified that it exclude
from mistakes of the design. As more factors are used to the design of Q1 tower and it provides
the better visual illustration. The preliminary design phase of the Q1 tower construction includes
 Frame and window coverings of the Q1 tower
 Covering of wall in Q1 tower
 Floor covering of the Q1 tower
 Special lighting inside Q1 tower
 Color synchronization in addition with coordination
 Special interior design of the Q1 tower
The preliminary cabinetry design of the Q1 tower contains three dimensional isometric drawings,
location of all drawers and doors, location of plumbing fixtures and all accessories, specially
built in furnishers and cabinets. Preliminary ceiling design of the Q1 tower provides the design
and location of gypsum board soffits and ceilings as well as location and generic specifications
of each lighting fixtures. Finally, preliminary design strategy provides the high level design of
Q1 tower and it satisfy the requirements of system architecture.
3. Detailed design
The detailed design standard for the Q1 tower is to provide an original concrete result to certify
concrete. It might be pumped to excessive heights.
3