TCP/IP Internetworking: Setting up a Network and Configuring Network Services

This guide covers the configuration of a network using TCP/IP Internetworking. It includes setting up a network with PC, server, and router interface configuration, routing configuration, ping tests, traceroute, and configuring network services such as DHCP, web server, DNS, and firewall. The guide provides step-by-step instructions and screenshots for each configuration process.

Running head: TCP/IP INTERNETWORKING
TCP/IP Internetworking
Name of the Student
Name of the University
Author’s Note

1
TCP/IP INTERNETWORKING
Task 1 - Setting up a Network
Network Diagram
1. PC, Server and Router interface configuration with proper IP address
PC configuration

2
TCP/IP INTERNETWORKING
For the configuration of the PC it is essential to configure the DHCP address pool on the server
and on the PC the radio button DHCP is selected to automatically get the IP address form the
router.

3
TCP/IP INTERNETWORKING
Server Configuration
WEB Server

4
TCP/IP INTERNETWORKING
The WEB server is configured with a static IP address according to the IP addressing plan of the
organization and it is kept in separate subnet for increasing the security of the network.
DHCP Server
The DHCP server is configured with a static IP address according to the IP addressing plan of
the organization and it is kept in separate subnet for increasing the security of the network.

5
TCP/IP INTERNETWORKING
For the configuration of the DHCP service a start range is selected and the number of user
allocated in the subnet is inputter for allocating the maximum number of IP address to the user
connected in the network.
DNS Server

6
TCP/IP INTERNETWORKING
For the configuration of the DNS server the url www.RaheemAbbas.csu.edu is used and it is
mapped with the IP address used for the configuration of the WEB server such that it support

7
TCP/IP INTERNETWORKING
reverse mapping and the user can either use the IP address of the url to connect with the WEB
server.
2. Configuration of the Router interfaces
Router 1 Configuration
For the configuration of the router the CLI mode of the router is opened and firstly the interface
is selected to inputting IP address to each of the interface. Here the router is connected to the
switch using the fast ethernet 0/0 and thus ip is set for the fast ethernet that acts as the gateway
address for the PC connected in the network and the serial S0/0/0 is configured with with IP
address of another subnet for management of the connection between the routers.

8
TCP/IP INTERNETWORKING
Router 2
For the router 2 configuration the same procedure is followed as the router 1 where the IP
address is inputted for each of the interface and it is activated using the no shut command.
2. Routing configuration
Router 1 Configuration
The router configuration command that are used for the configuration of the router1 are given
below:
enable
configure terminal

9
TCP/IP INTERNETWORKING
interface FastEthernet0/0
ip address 152.63.0.1 255.255.255.0
exit
interface Serial0/3/0
ip address 152.63.1.1 255.255.255.252
exit
ip route 152.63.2.0 255.255.255.0 152.63.1.2
ip dhcp pool dhcp1
network 152.63.0.0 255.255.255.0
default-router 152.63.0.1
dns-server 152.63.2.3
access-list 101 deny tcp host 152.63.0.2 host 152.63.2.6 eq www
access-list 101 permit ip any any
access-list 101 deny host 152.63.0.2
access-list 101 permit any
Router 2 Configuration
The router configuration command that are used for the configuration of the router2 are given
below:
enable

10
TCP/IP INTERNETWORKING
configure terminal
interface Serial0/3/0
ip address 152.63.1.2 255.255.255.252
exit
interface FastEthernet0/0
ip address 152.63.2.1 255.255.255.0
exit
ip route 152.63.0.0 255.255.255.0 152.63.1.1
3. Ping test
Pinging the client own interface
The ping test is done for checking the connectivity of the devices and sending and receiving of
data packet in the network. The screenshot of test is attached withy the report for the
demonstration of the functionality of the network.

11
TCP/IP INTERNETWORKING

12
TCP/IP INTERNETWORKING
Pinging the local router gateway interface
Pinging the remote router interface
4. Traceroute

13
TCP/IP INTERNETWORKING
The traceroute is sued for analyzing the number of hops used by the network for reaching the
destination address. Here the traceroute of there of the servers are used for identification of the
hops from the source client PCs.
Task 2 - Configuring Network Services
1. DHCP:
The configuration of the DHCP server is given in the report which shows that the client PC has
successfully received the IP address and demonstrates that the DHCP server is configured
properly.

14
TCP/IP INTERNETWORKING
2. WEB Server:
The configuration of the web server is demonstrated in the following screenshot which shows
that the HTTP and the HTTPs service is enabled.

15
TCP/IP INTERNETWORKING
3. DNS:
The following screenshot shows the proper configuration of the DNS server by entering the url
used for the configuration in the browser of the pc connected in the network.

16
TCP/IP INTERNETWORKING
The IP address used for mapping in the DNS server is used for reaching the webs server for
testing the proper configuration of the DNS service in the server.

17
TCP/IP INTERNETWORKING
4. Firewall:
The following firewall configuration is used for blocking the access of the web server for a client
pc connected in the network.
access-list 101 deny tcp host 152.63.0.2 host 152.63.2.6 eq www
access-list 101 permit ip any any
access-list 10 deny host 152.63.0.2
access-list 10 permit any

18
TCP/IP INTERNETWORKING
The above screenshot shows that the firewall is configured properly and the pc is blocked from
accessing the contents of the web server.

19
TCP/IP INTERNETWORKING
Bibliography
Alani, M. M. (2017). Guide to Cisco Routers Configuration: Becoming a Router Geek. Springer.
Archana, C. (2015). Analysis of RIPv2, OSPF, EIGRP Configuration on router Using CISCO
Packet tracer. International Journal of Engineering Science and Innovative Technology
(IJESIT) Volume, 4.
Lezhepekov, A., Letenko, I., & Vladyko, A. (2017, February). Software-defined routing in
convergent LTE/WiFi networks. In Young Researchers in Electrical and Electronic
Engineering (EIConRus), 2017 IEEE Conference of Russian (pp. 173-175). IEEE.
Liu, M. (2014). Cisco Networking Academy: Next-Generation Assessments and Their
Implications for K-12 Education. Clayton Christensen Institute for Disruptive Innovation.
Prasad, N. H., Reddy, B. K., Amarnath, B., & Puthanial, M. (2016). Intervlan Routing and
Various Configurations on Vlan in a Network using Cisco Packet Tracer. International
Journal for Innovative Research in Science and Technology, 2(11), 749-758.
Ras, J. (2016). Cisco Router Configuration Guide.
Sun, L., Wu, J., Zhang, Y., & Yin, H. (2013, April). Comparison between physical devices and
simulator software for Cisco network technology teaching. In Computer Science &
Education (ICCSE), 2013 8th International Conference on (pp. 1357-1360). IEEE.
Tagliacane, S. V., Prasad, P. W. C., Zajko, G., Elchouemi, A., & Singh, A. K. (2016, March).
Network simulations and future technologies in teaching networking courses:
Development of a laboratory model with Cisco Virtual Internet Routing Lab (Virl).

20
TCP/IP INTERNETWORKING
In Wireless Communications, Signal Processing and Networking (WiSPNET),
International Conference on (pp. 644-649). IEEE.