Engineering Project Reports and Competency

This assignment focuses on analyzing the effectiveness of three engineering projects through detailed project reports. It requires the candidate to demonstrate specific competencies outlined by the Engineers Australia competency standards, such as effective oral and written communication, creative problem-solving, and professional information management. The analysis includes examples from each project, highlighting how the candidate met these competency requirements.

Professional Engineering: Summary Statement
Competency Element
A brief summary of how you
have applied the element
Paragraph number in the
career episode(s) where the
element is addressed
PE 1 KNOWLEDGE AND SKILL BASE
PE1.1 Comprehensive,
theory based
understanding of the
underpinning natural and
physical sciences and the
engineering fundamentals
applicable to the
engineering discipline.
1. I had conducted this project
work on alternative vehicle to
run non-renewable sources of
energy. I have worked with the
mechanical devices employed
to capture and transfer of solar
electricity.
2. I have analyzed that project
report is based on the effect of
the causes of corrosion into
Weldment. I had performed the
project work on finding proper
causes of the corrosion into
Career Episode 1: CE 1.2.3,
CE 1.3.1 and CE 1.3.2
Career Episode 2: CE 2.3.1
and CE 2.3.3
Career Episode 3: CE 3.2.1,

Weldment of the Austenitic
and Ferritic stainless steel.
3. The purpose of this project
work is to construct of
hydropower plant which
provides of green energy. The
plants are not required to
release of greenhouse gases
and it provides of energy
which are not caused pollution
to the environment.
CE 3.3.1 and CE 3.3.2
PE1.2 Conceptual
understanding of the
mathematics, numerical
analysis, statistics, and
computer and
information sciences
which underpin the
engineering discipline.
1. The purpose of this project
is to develop and demonstrate
of unique system which can
generate of electric without
cost and any type of carbon
footprint. We have introduced
prototype for the mechanical
hybrid concept car.
2. I have strong knowledge of
welding processes. I have
ability to demonstrate of
Career Episode 1: CE 1.3.1
Career Episode 2: CE 2.3.2,
CE 2.3.3 and CE 2.3.4

accurate use of mechanized
welding processes.
3. I have the knowledge to do
welding for welding joints into
all the mechanical components. Career Episode 3: CE 3.3.1
PE1.3 In-depth
understanding of
specialist bodies of
knowledge within the
engineering discipline
1. I have observed that use of
solar energy in the car is
considered as cost effective
way to improve efficiency into
the energy along with
reduction of carbon emissions
into the transport sectors.
2. I had studied various articles
related to welding of stainless
steel, and I had compared the
findings of this study with one
another. I had carried skills for
qualitative as well as
quantitative analysis with use
of various project topic related
journals.
Career Episode 1: CE 1.3.1
Career Episode 2: CE 2.3.1,
CE 2.3.4, CE 2.2.5 and CE
2.4.2
Career Episode 3: CE 3.3.1,

3. In this particular project,
electricity is generated by
means of hydro power plant. I
had involved into development
of hydroelectric power plant
for Middle Modi.
CE 3.3.3
PE1.4 Discernment of
knowledge development
and research directions
within the engineering
discipline
1. I have developed, designed
and manufactured of the
mechanical devices includes of
panels, machines and engines
involved into installation of the
transport system.
2. I had conducted the entire
research to outline out the
relationship between weldment
corrosion in addition to weld
heat.
3. I can able to manage the
project time and project
resources for performing of
fabrication and transportation
further with an erection. I had
Career Episode 1: CE 1.2.5,
CE 1.3.1 and CE 1.4.2
Career Episode 2: CE 2.3.2,
CE 2.3.4 and CE 2.4.1
Career Episode 3: CE 3.3.2,
CE 3.3.3 and CE 3.4.1

provided better support as
erection time.
PE1.5 Knowledge of
contextual factors
impacting the engineering
discipline.
1. I had made the roof of the
alternative car which solar
honeycomb membrane panel
which is used to collect of ray
of sun when it is parked into
the moving stage.
2. I know to carry out a survey,
feasibility study and review of
the design. I had then
modernization as well as
reconstruction of the facilities
into power engineering.
Career Episode 1: CE 1.2.1,
CE 1.2.2 and Career Episode
2: CE 2.2.1, CE 2.2.2
Career Episode 3: CE 3.2.1,
CE 3.2.2
PE1.6 Understanding of
the scope, principles,
norms, accountabilities
and bounds of
contemporary
engineering practice in
the specific discipline
1. I had involved in designing
of a green vehicle that can used
to generate of electric without
carbon footprint.
2. I have used of welding
process for reduce the effect of
welding heat on weldment
corrosion. I had used of solid
Career Episode 1: CE 1.2.3,
CE 1.3.1, CE 1.3.4 and CE
1.3.2
Career Episode 2: CE 2.2.3,
CE 2.3.1 and CE 2.3.2 and

state welding for this project
work to meet with its
objective.
Career Episode 3: CE 3.2.3,
CE 3.3.1 and CE 3.3.2
PE 2 ENGINEERING APPLICATION ABILITY
PE2.1 Application of
established engineering
methods to complex
engineering problem
solving
I had carried out qualitative
as well as quantitative
analysis with use of
various project topic
related journals. Mainly, I
had focused on qualitative
analysis due to limited time
as well as resources. I had
reviewed the quality
journals to fill the gap of
my findings.
Career Episode 1: CE 1.2.4, CE
1.3.1 and CE 1.4.2 and Career
Episode 2: CE 2.3.3, CE 2.3.4 and
CE 2.4.1, CE 2.4.2 and Career
Episode 3: CE 3.3.1, CE 3.3.2 and
CE 3.4.2
PE2.2 Fluent application
of engineering techniques,
tools and resources.
1. In order to utilize of
solar energy, we had
installed solar power
accumulator by comprising
of components such as
solar panel.
Career Episode 1: CE 1.3.3, CE
1.3.2 and CE 1.3.1

2. Using of welding
techniques is
recommended as the best
method to avoid corrosion
as it has lower peak heat
and lower heat cycle such
as Laser Beam welding and
Friction Stir welding.
Career Episode 2: CE 2.3.1, CE
2.3.2 and CE 2.3.3 and Career
Episode 3: CE 3.3.1, CE 3.3.2 and
CE 3.3.3
PE2.3 Application of
systematic engineering
synthesis and design
processes.
I had performed
instrumentation under the
wind generation. We had
designed of specific
compact wings for
generation of wind that is
fitted into small space and
provide rotation from
lower strength wind thrust.
Career Episode 1: CE 1.2.3, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.3.3 and
CE 2.3.4
Career Episode 3: CE 3.2.2
PE2.4 Application of
systematic approaches to
the conduct and
management of
engineering projects
1. I had used photovoltaic
panel, pump and fans to
transfer sunlight into useful
products.
2. I had accomplished this
Career Episode 1: CE 1.3.1 and
CE 1.3.2
Career Episode 2: CE 2.2.3, CE

research work into
addressing of corrosion
effect. After reviewing of
the articles, I came to know
that corrosion into
weldment is caused by
welding heat as various
welding techniques are
varied in magnitude of
weld heat.
3. I had provided better
support as erection time. I
have knowledge to carry
out survey, feasibility
study and review of the
design.
2.3.1, CE 2.3.2 and CE 2.3.3
Career Episode 3: CE 3.3.1 and
CE 3.3.2
PE 3 PROFESSIONAL AND PERSONAL ATTRIBUTES
PE3.1 Ethical conduct
and professional
Accountability
I had carried out the entire
project work properly so I
had followed a strict
deadline to complete the
Career Episode 1: CE 1.2.3, CE
1.3.3 and CE 1.4.1
Career Episode 2: CE 2.2.3, CE
2.3.5 and CE 2.4.2
Career Episode 3: CE 3.3.3, CE

work on time. 3.4
PE3.2 Effective oral and
written communication in
professional and lay
domains
1. I had reported and
recorded the milestones for
the project work.
2. I had involved into this
project to analyze proper
causes of corrosion into
weldment of Austenitic
and Ferrtic stainless steel.
3. I had then modernization
as well as reconstruction of
the facilities into power
engineering.
Career Episode 1: CE 1.2.3, CE
1.3.3 and CE 1.4.1
Career Episode 2: CE 2.2.3, CE
2.3.5 and CE 2.4.2
Career Episode 3: CE 3.3.3, CE
3.4

PE3.3 Creative,
innovative and pro-active
demeanor
I had worked with my team
members to conduct the
project work properly. My
team members helped me
into the calculation of
power into the wind.
Career Episode 1: CE 1.3, CE 1.4
and CE 1.4.2 and Career Episode
2: CE 2.3, CE 2.4, CE 2.2.5 and
CE 2.4.2 and Career Episode 3:
CE 3.2, CE 3.3
PE3.4 Professional use
and management of
information
After preparing of final
draft of the project work, I
had sent the project draft to
the supervisor for final
review so that on time I
can able to make changes
into the project.
Career Episode 1: CE 1.2.3, CE
1.2.5, CE 1.4.2 and Career
Episode 2: CE 2.2.3, CE 2.2.5, CE
2.4.2 and Career Episode 3: CE
3.2.3, CE 3.2.5, CE 3.4.2
PE3.5 Orderly
management of self and
professional conduct
I had prepared the final
project report and sent it to
the project supervisor for
their feedback.
Career Episode 1: CE 1.4.2, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.4.2, CE
2.3.2, CE 2.3.3 and CE 2.3.4 and
Career Episode 3: CE 3.4.2, CE
3.3.1 and CE 3.3.2
PE3.6 Effective team
membership and team
I had also scheduled the
work, time management,
Career Episode 1: CE 1.4.1, CE