Using Engineering Information and ICT

Using Engineering information and ict 1
USING ENGINEERING INFORMATION AND ICT
By Name
Course
Instructor
Institution
Location
Date

Using Engineering information and ict 2
Mechanical
Q1: Types of tooling required to create an M8 tapped hole
1 - Entering tap
2 - Plug tap
3 - Third tap
Q:2 Identify speeds and feeds for tooling you have decided upon for use in mild steel
Type of
Material
Cutting Speed (SFM)
Mild Steel 40-140
Material Feedrate (in/rev)
Steel 0.010 - 0.090
Links:
https://support.bantamtools.com/hc/en-us/articles/115001658374-Speeds-and-Feeds

Using Engineering information and ict 3
Q3: Where would find and what is the wheel nut torque of a BMW 1 series f20 2011 2018
The wheel nut torque of the BMW 1 series f20 2011 2018 is found in the rear tyre and it is 140
NM.
Link
https://www.puretyre.co.uk/tyre-information/tyre-pressures/bmw-tyre-pressures/bmw-1-series-
tyre-pressures-and-wheel-nut-torque-setting/
Q4. What type of gasket material is used on BMW 1 series f20 2011 2018
The most common types of gasket material used in BMW 1 series f20 2011 2018 is Graphite and
Rubber.
Basically, in obtaining the above answers, there were several sites and sources which could help
but could not be used since they were not very clear on the concept and information required that
why I only selected some whose links have been given above.
Electrical
Q1: Components found in a simple electronic circuit