# Question- B5E02 Engineering Sciences = Select standard rolled steel sections for beams and columns to satisfy given specifications. (a) Beam selection A standard rolled steel I-section is required for the simply supported beam shown in Figure Task 1.2.a. …

B5E02 Engineering Sciences solution of this question

__Beam selection__

A standard rolled steel I-section is required for the simply supported beam shown in Figure Task 1.2.a. A factor of safety of 12 is to apply and the ultimate tensile strength of the material is 510 MPa. Select a standard rolled steel I-section from the tables provided in Lecture 1.2 that satisfy the given specifications. The selected section must have the least possible depth. The weight of the beam itself may be neglected when calculating the maximum bending moment.

(b) __Column selection__

A strut of length 8m with one end direction-fixed and one end pin-jointed is required to carry a compressive load of 750 kN. Select a suitable universal steel column from the tables provided in Lecture 1.2 that satisfy the given specifications and has the least mass.

**1st page**

**2nd Page**

**Here is the complete solution of this B5E02 Engineering Sciences Unit 2 Select standard rolled steel sections for beams and columns to satisfy given specifications.**

Task 1.2 (P12) Select standard rolled steel sections for beams and columns to satisfy given specifications (@ Beam selection A standard rolled steel I-section is required for the simply supported beam shown in Figure Task 1.2.4. A factor of safety of 12 is to apply and the ultimate tensile strength of the material is 510 MPa. Select a standard rolled steel [-section from the tables provided in Lecture 1.2 that satisfy the given specifications. The selected section must have the least possible depth. The weight of the beam itself may bbe neglected when calculating the maximum bending moment. 20kKNm-1 y paqgoosoqosooqcosoq9qq9q0q9009q909000009 Â» 3m a | Ry ig. Task 1.2.(a) Simply supported beam with uniformly distributed load (b) Column selection A strut of length 8m with one end direction-fixed and one end pin-jointed is required to carry a compressive load of 750 KN, Select a suitable universal steel column from the tables provided in Lecture 1.2 that satisfy the given specifications and has the least mass.

# Our Happy Testimonials

They are fast in responding to homework questions. they have the best technical writers. Thanks for helping me with my programming doubts.

I contact to disklib for homework, they help me out, despite there was some technical issue they gone through extra mile for me and provide me good quality work in first priority. 100% recommended.

Desklib's study resources are best & unique. Their study database is easy to access and easy to use.

100 % recommended.