COM5001B: Data Communication Network Design for PineMartin Fuels Ltd.

This presentation outlines a data communication network design solution for PineMartin Fuels Ltd., addressing data inconsistency issues. The proposed solution involves a cloud storage system to avoid data repetition and ensure data consistency. Key devices such as firewalls, routers, servers, switches, and laptops are integrated into the network design. Cabling is implemented using Wireless LAN (WLAN) technology for cost-effectiveness, easy expandability, and mobility. The implementation of Wi-Fi is also discussed to connect all systems wirelessly. The conclusion emphasizes the suitability of the cloud storage network system for PineMartin Fuels Ltd., highlighting its benefits in resolving data inconsistency problems and facilitating efficient data management.

DATA
COMMUNICATION

INTRODUCTION
 At the workplace of every organisation, data must be stored
properly and for which very strong communication network is
required.
 In the current case scenario, issue of data inconsistency occurred
in PineMartin Fuels Limited company which supplies oil.
 It recruits very few staffs and service engineers but sometimes,
the same data is stored in different formats.
 Due to resolving problem of data consistency, a suitable network
is designed in the present case.

Network Design

CONTD....
 In order to make solution of the problem incurred in PineMartin Fuels Ltd.,
cloud storage system will be taken into consideration.
 It is an approach where all the data and information is recorded properly where
any data does not repeat in another format.
 As per cloud based network design, data will be stored online in which when
one information save by end users which is already saved then system will not
re-save it.
 In this, cloud of internet shown in figure will be connected with firewall which
helps to restore data.
 Along with this, issue of data sharing from one company to another will be
also resolved.
 Apart from this, other devices like router, server, switch, etc. are also included
in network design of cloud storage system.

Key Devices
 Internet
 Firewall
 Router
 Server
 Switch
 Laptops

Cabling
 A process which connects all the devices and aspects in one diagram is considered as cabling. Due
to lack of availability of this, selected network diagram cannot be applied. Further, it is not possible
to connect all the devices properly.
 For the present selected network diagram, cabling will be done with the help of Wireless LAN
system. As per this, huge wirings and cabling is not required to apply proposed network diagram in
PineMartin Fuels Ltd. Moreover, as name reflects that it works wireless or without wires.
 It is helpful to connect all the devices properly and if any issues incurred then resolved quickly as
well. In addition to this, for the long distance also, it is a supportive method of cabling.
 It will be helpful to the selected company for establishing fast setup, mobility and easy
expandability. Further, it is one of the cost effective cabling method.

Wi-Fi Requirements
 At the workplace of
PineMartin Fuels Limited,
Wi-Fi will be required in
order to connect all the
systems without using any
kind of wires.
 Apart from this, services of
internet will be also easily
passed from router up to end
users.

CONCLUSION
 In conclusion, it can be said that cloud storage network system will be
highly appropriate for PineMartin Fuels Limited.
 The reason is that it avoids those data and information which are already
stored in the system.
 Therefore, problem of data repetition or data inconsistency will be
resolved properly.
 In addition to this, key devices will be like firewall, router, server, switch
and laptops.
 Moreover, cabling will be done on the basis of Wireless LANs and Wi-Fi
needed to connect all the systems with each other.
 So that, problem and obstacle of data inconsistency will be solved within
the firm.

REFERENCES
Bae, M., Kim, K. and Kim, H., 2016. Preserving privacy and efficiency in data
communication and aggregation for AMI network. Journal of Network and Computer
Applications. 59. pp. 333-344.
Kim, S. D., Lee, S. M. and Lee, S. E., 2015, January. Secure communication system for
wearable devices wireless intra body communication. In Consumer Electronics (ICCE),
2015 IEEE International Conference on. pp. 381-382.
Ou, Z. and et.al., 2015. Utilize signal traces from others? A crowdsourcing perspective of
energy saving in cellular data communication. IEEE Transactions on Mobile Computing.
14(1). pp. 194-207.
Wen, G., Chen, M. Z. and Yu, X., 2016. Event-triggered master–slave synchronization with
sampled-data communication. IEEE Transactions on Circuits and Systems II: Express
Briefs. 63(3). pp. 304-308.
What is a Network Diagram. 2017. [Online]. Available through:
<https://www.lucidchart.com/pages/network-diagram>.