HLTINF001 Assessment: Infection Prevention and Control Compliance

This document provides solutions to an assessment for HLTINF001, which focuses on complying with infection prevention and control policies and procedures. The assessment covers various aspects of infection control, including pre-surgical handwashing steps, when to use soap and water versus alcohol-based hand rubs, skin protection for healthcare workers, fingernail care, jewelry restrictions during clinical care, guidelines for glove use, and the appropriate use of gowns and waterproof aprons. It also addresses the use of prescription eyeglasses versus protective glasses, situations requiring masks, the information contained in cleaning schedules, and the proper cleaning procedures for work surfaces. Further topics include handling, transporting, and processing linen, paths of infection transmission, the chain of infection, types of infectious agents, modes of transmission, the concept of a susceptible host, methods for cleaning equipment, definitions of infection, colonization, and disease, examples of fungal infections and viral spread, additional precautions, and risk assessment strategies. Desklib provides these solved assignments and other study materials to aid students in their learning.

HLTINF001
Comply with infection
prevention and control
policies and procedures
Release 1
Total Training Solutions Adelaide
Assessments
RTO NO 41373

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Question 1
Question 4 List the steps involved in a pre-surgical hand wash.
2

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer There are some steps which are involved in pre-surgical hand wash.
 This may include five minutes craft wing that can help it to cleaning the
fingernails and undertaking first scrub of the day.
 This can be done for 3 minute duration.
 Hand need to kept higher than elbow all time which can help to allow water to
run in one direction only
 Need to use brush of nail
 Brush can be used to clean only fingernails
 Need to wash arm in the circular motion which can implement from hand to the
elbow without returning to hands
 Need to use antimicrobial soap for the first scrub.
Marking q Satisfactory q Unsatisfactory
Question 5 When should hands be washed with soap and water rather than alcohol-based
hand rub?
Answer When hands are visibly soiled then in such situation, there is need to wash hands
with the use of soap and water rather than alcohol-based hand rub. This can be
effective and allow to get over through any type of risk which can be there to skin
due to frequently use of alcohol-based hand rub.
Marking q Satisfactory q Unsatisfactory
Question 6 How can a healthcare worker protect their skin from the effects of handwashing?
Answer There is need to use of oil containing lotion or any barrier cream which can be
effective and provide such substantially protection to hand of vulnerable healthcare
worker. This can help to protect skin from effect of hand washing.
Marking q Satisfactory q Unsatisfactory
Question 7 How should a healthcare worker care for their fingernails?
3

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer Healthcare worker need to take care of their finger nails and where it includes
sanitisation and protection.
Through using gloves and other equipment. In this, there is need to clean fingernails
more efficiently that should not take any type of microbial infection. In this, there is a
need to use a scrub with 3 minutes duration and nail brush should use to clean
fingernails.
Marking q Satisfactory q Unsatisfactory
Question 8 Should jewellery be worn when providing clinical care? Why/why not?
Answer During clinical care healthcare professional should not wear any type of jewellery on
duty or clinical care or during washing their hand. This can create high effectiveness
to perform responsibility for safeguarding their patient. This can also provide safety
from handling hand hygiene practices.
Marking q Satisfactory q Unsatisfactory
Question 9 State two guidelines for the use of gloves in a healthcare facility.
Answer There are 2 guideline for using of gloves within healthcare facilities.
 There should not be use of one gloves in more than one procedure.
 Gloves should not worn for more than one contact activity with the person.
Marking q Satisfactory q Unsatisfactory
Question 10 When should a healthcare worker wear a gown or waterproof apron?
4

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer Gown and waterproof apron should be worn when there is possibility of
contamination or splatter of skin or clothes. When there is high risk of presence of
pathogens, it can help to protect skin disease like a scabies.
Marking q Satisfactory q Unsatisfactory
Question 11 Can prescription eye glasses be worn in place of protective glasses?
Answer No prescription eyeglasses should not be worn in place of protective glasses.
Marking q Satisfactory q Unsatisfactory
Question 12 List four situations where the wearing of a mask is required.
Answer There are some situation when wearing of mask is required.
 When the risk of sprays of fluid or places
 excretion or secretion into eyes
 Risk of body substances
 During any checking
Marking q Satisfactory q Unsatisfactory
Question 13 What information do cleaning schedules contain?
5

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer Cleaning schedule may contain some information which is regarding about the
personnel responsible, when the task should be completed, when task must be
completed.
Marking q Satisfactory q Unsatisfactory
Question 14 All work surfaces need to be cleaned to prevent the spread of infection. What
cleaning needs to be completed before wiping with a pH neutral cleaning solution?
Answer There is need to clean all the work surfaces for preventing infection to get a spread.
In this, there is need to complete the cleaning through using detergent where both
alkaline and acidic substances should be damaged through using natural pH
cleaning solution.
Marking q Satisfactory q Unsatisfactory
Question 15 List the procedure for handling, transporting and processing linen that will assist in
the control of infection.
Answer  There is need to watch the Lenin with commercial washer and should be
stored in clean dry place which can help to prevent a contamination within
healthcare facility.
 Lenin should be stored in cover trolley or cupboard.
 There is also need to rotate the Lenin which can help to constantly use day
back of a pile.
Marking q Satisfactory q Unsatisfactory
Question 16 List the three paths of transmission for infection to spread.
6

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer There are different parts of Transmission for inspection to spread which may include
 Direct contact with microorganism
 direct contact with wound dressing
 direct contact with surfaces
Marking q Satisfactory q Unsatisfactory
Question 17 Explain what is meant by ‘the chain of infection’.
Answer Chain of infection refers to the spread of infection wheather in person-to-person. In
this, person get infected by pathogen when any microbe is transferred from one
person to another where pathogen are entirely and can spread from one to another
person.
Marking q Satisfactory q Unsatisfactory
Question 18 List the five main types of infectious agents.
Answer Five main type of infectious agents may include
 Viruses
 Protozoa
 bacteria
 fungi
 parasitic worms
Marking q Satisfactory q Unsatisfactory
Question 19 Microorganisms are spread through direct contact, aerosols and penetrating injury.
Explain what each mode of transmission is and give one example for each.
7

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer When individual get infected due to direct contact with the microorganism then
direct contact can lead to create a spread of microorganism with an individual. For
example- due to touch of direct surface can have the chance to get virus.
Aerosol is another mode of microorganism transmission where droplet of saliva
mucous humidity and sweat can create a spread of infection.
Penetrating injury can also lead to create risk of infection due to open route of
transmission of disease direct to the body. For example- getting cut on body have
higher chance of getting contaminated and spread of microorganism as an infection.
Marking q Satisfactory q Unsatisfactory
Question 20 What is meant by the term ‘susceptible host’?
Answer Susceptible host refers to a person who is vulnerable to infection.
Marking q Satisfactory q Unsatisfactory
Question 21 List and give a brief explanation of the three methods of cleaning used for
equipment to prevent the spread of infection.
Answer Opening instrument and rinse to sink in the warm water.
This can help to remove blood and other matter to stick in the item using detergent.
Recommended by manufacturer for removing fluid need to use scrub with a brush.
Marking q Satisfactory q Unsatisfactory
Question 22 Explain what is meant by ‘Infection’.
8

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer Infection refers to growth and invasion of germs on body. This may include yeast,
viruses, bacteria or other microorganisms which can spread all through and can
cause fever or health problem.
Marking q Satisfactory q Unsatisfactory
Question 23 Explain the terms colonisation and disease.
Answer Colonisation refers to human body which are not making individually sick and
people don't have any sign and symptom whereas disease are visible and individual
may get sick and get different sign and symptom.
Marking q Satisfactory q Unsatisfactory
Question 24 Give an example of a fungal infection and explain how it is spread.
Answer Tinea is one of the example of a fungal infection.
Fungal infection are highly infectious which form in most part of the body and warm
like a under the breast and groin. It can also known as ringworm.
Marking q Satisfactory q Unsatisfactory
Question 25 Explain what a virus is and give an example of how it can be spread.
9

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer Virus refers to infection and which can take control of host cells. It can spread
through person to person through contacting, good food and air.
Marking q Satisfactory q Unsatisfactory
Question 26 Explain the term ‘additional precautions’.
Answer Additional precaution refers to infection prevention and control precautions and
practices. This is the one which can be additionally used in routine practices and
help to provide safety from transmission of infectious agent, contact airborne and
droplet.
Marking q Satisfactory q Unsatisfactory
Question 27 List three types of additional precautions used in healthcare facilities when standard
precautions are not sufficient to contain infection.
Answer There are different types of additional precautions which can be used within
healthcare facilities where standard precautions are not effectively sufficient for
contain infection.
 Immunizations
 special facilities
 additional ventilation measures
Marking q Satisfactory q Unsatisfactory
Question 28 List three types of additional precautions that may be used to control the spread of
infection for people who are carriers, in the incubation phase or those who are
acutely ill.
10

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer There are different type of additional precautions which can be used to control
spread of infection for people which care lead to carriers, either in incubation phase
or for those who are acutely ill.
 Isolating the person
 Reverse barrier nursing
 Implementing barrier nursing
Marking q Satisfactory q Unsatisfactory
Question 29 Define the terms hazard, risk and risk control.
Answer Hazard refers to something which have the potential to cause harm sometimes in
health and human injury. It also damage to property or environment are can be
combination of these.
Risk refers to the probability or consequences of injury damage result and illness
from exposure of any type of hazard.
Risk control refers to set of method which can evaluate potential losses and can
help in taking action for reducing or eliminating such type of threats.
Marking q Satisfactory q Unsatisfactory
Question 30 Proactive and reactive strategies are two methods for assessing the risk for the
spread of infection through direct contact. Explain what each approach is.
Answer Proactive strategy refers to the strategy which are used to carried out for preventing
and incident or accident. It may contain information about how may jobs should
carry out. It also includes control measures and types of risk.
Reactive strategy refers to a reactive approach which can help to risk identification
which are involved in reviewing any incident or accident. Through measure like data
and report forms, it includes communities, team meetings or discussing infection
control risk.
Marking q Satisfactory q Unsatisfactory
Question 31 Explain how risk is assessed to determine the level of severity of the hazard.
11

HLTINF001
Comply with infection prevention and control policies and procedures – Assessments
Answer Risk is assessed by determining the level of security of the hazard with different
steps.
This may include evaluating an injury or illness which can be like injury or illness.
 Monitoring and inspection of the information.
 Identify the factor which can create potential risk.
 Identifying action which can eliminate or control the risk.
Marking q Satisfactory q Unsatisfactory
Question 32 Give two examples that can leave people more susceptible to infection.
Answer There are two different example which can leave people more susceptible to
infection.
 Elderly people
 Premature babies
These can be effective and allow to get more effect and can have high impact on
individual health.
Marking q Satisfactory q Unsatisfactory
Question 33 List the hierarchy of controls that are used to prevent the risk of acquisition for
infections.
Answer Hierarchy of control which can be used to prevent the risk of a position for infection
are follows.
 Elimination
 Substitution
 Isolation
 Engineering controls
 Administrative controls
 PPE
These are some of the list of hierarchy of controls which can be used to prevent the
risk of acquisition for infection.
Marking q Satisfactory q Unsatisfactory
Question 34 How does the immune system assist the process of fighting infections?
12