EG5111 Advanced Technology Report: Construction Method & Planning

This report provides a comprehensive method statement for the Gherkin 30 St Marry Axe construction project, addressing safety and feasibility for staff. It includes a risk assessment identifying potential factors impacting project development, along with a Work Breakdown Structure (WBS), Gantt chart, and network diagram to illustrate project activities and critical paths. The report details pre-start checks, work sequences, structural stability considerations, personnel involved, and control measures for health and safety management. Ultimately, the report aims to provide a structured approach to project planning, risk mitigation, and efficient execution within budget and schedule, highlighting the importance of documentation and continuous monitoring throughout the project lifecycle. Desklib offers a range of similar resources for students.

Running head: ADVANCED TECHNOLOGY REPORT
Advanced Technology Report
Name of the Student
Name of the University
Author Note

1
Running head: ADVANCED TECHNOLOGY REPORT
Table of Contents
Introduction......................................................................................................................................2
Method Statement............................................................................................................................2
Risk Assessment..............................................................................................................................5
WBS.................................................................................................................................................9
Gantt Chart.....................................................................................................................................10
Network Diagram..........................................................................................................................11
Activity List and Schedule.............................................................................................................12
Conclusion.....................................................................................................................................14
Bibliography:.................................................................................................................................15

2
Running head: ADVANCED TECHNOLOGY REPORT
Introduction
The aim of this report is to demonstrate the method statement considering the aspects
related to the construction project Gherkin 30 St Marry Axe as the case study for the project.
This report explains the method statement that can be applicable for determining the safety and
feasibility of the project from the perspective of the staffs and employees rolled into the project.
This report also presents the risk assessment considering the facts that might affect the growth
and development of the project.
Method Statement
Title: Gherkin 30 St Marry Axe
Site Details
Contractor name and contact details: Skanska Construction Company, Johan
Karlstorm (CEO), Hans Biork (Chairman)
Project name and site address: Gherkin 30 St Marry Axe at St Mary Axe, London, EC3
United Kingdom
Site manager name and contact details: [please fill]
Transfer of Information from Client / Contractor to Relevant Sub-Contractor
The individual responsible for the craneage’s provision should be agreed
The contractor should concern the hazards including the airspace, power cables, railway
lines, and others and the information should be passed to the floor sub-contractor.

3
Running head: ADVANCED TECHNOLOGY REPORT
The received structure of the project should be confirmed before executing the project
from the perspective of structural stability.
Proper and effective safety equipment’s should be available at the site ensuring maximum
security to the individuals and staffs working at the project. Structural engineer should provide
the approval.
Attendances
Before the execution of the operational activities at the site, the contractor or client will
need to execute the following:
Hard Standing for the Crane, and hard access roads will be need to well maintained and
provided for the effective transport facilities. There should be enough availability of the space
for off – loading or stacking area considering a consolidation of a 12m x 8m area, capability of
holding the outrigger loads, and level hard standing as described in the lifting plan.
Availability and maintenance-working area’s perimeter scaffolding including the guardrails,
handrails, staging and platform required for the safety access and preventing the activities from
falling back.
Flooring sub – contractor should be provided with the welfare facilities in manner to make
them comfortable at the sites.
There should be an effective agreement on the provisions related to the precautions against
passive fall protective measures. This can be accomplished in an effective and efficient manner
through working platforms, safety nets, staging, air bags, crash decks, and staff landing system
including air bags.

4
Running head: ADVANCED TECHNOLOGY REPORT
Work Activity
Pre start Checks: The area including the lifting and crane requirement, structural stability,
proximity hazards, work at height, ground conditions, and welfare facilities.
Contract Description: Total number of visits to the project will be calculated considering
the site visiting by the managers twice a day
Work’s Sequence and erection method: Units will be fixed as per the designed model; fall
protection, pole and zip establishment, and ladder will be used for reaching at higher places.
Structural Stability
“Load bearing masonry walls” should be well cured and they should be ready for receiving
the concrete units. The block work or external brick will be having levelled with or not more
than 225 mm.
Personnel
Backsmman or Slinger erectors, Foreman, Third parties or site operators, training, and
appointed person are the personnel involved in the project.
Control Measures, and Health and Safety Management
Site rules as per the safety factors of the employees, better and reliable equipment, access to
work area, components’ positioning, working at heights are the considerable factors for the
construction site.
Amendments and Additional Information

5
Running head: ADVANCED TECHNOLOGY REPORT
Before the enforcement of this method statement, all the individuals and heads involved
in the project should be approved on it and if not, the notification should be provided earlier.
Communication agreement will be considered after getting the initials from the key
stakeholders.
Construction diagram:
Figure 1: Steel Superstructure
(Source: Dyer, Grey and Kinnane 2017)
Risk Assessment

6
Running head: ADVANCED TECHNOLOGY REPORT
Risks Mitigation strategies
Likelihood
Severity
Initial
Risk
Rating
Manual Handling in
improper ways
4 3 12 Use of transportations and
technologies
Reducing loads where
possible
MH assessment
Using mechanical aids
1 3 3
Trips, Falls, or Slips
Egress or Access
4 3 12 Evert time work should be
aggregated
Distribution of risk
assessment
Standard housekeeping
1 3 3
Machinery and Plant
Traffic Management
5 5 25 Highlighting exclusion
zones
Designated routes
Risk assessment
implications
Wearing HI visibility
clothing
1 5 5
Lifting Operation 5 5 25 Certified personnel
appointing
Wearing orange hi-vis
1 5 5

7
Running head: ADVANCED TECHNOLOGY REPORT
Applicable schedule or lift
plans
Utilizing certified and tested
technologies
Excavations 4 5 20 Ensuring adequate trenches
support
Monitoring the excavations
by project supervisor
1 4 4
Hot and fire works 4 5 20 Lend Lease Hot Works
Permit System should be
followed for the
accomplishment of hot
works
Fire watch
1 5 5
Vibration 3 4 12 Pre - identification before
executing the project
Full PPE worn
Toolbox application
1 5 5
Hand tools 4 3 12 Competent and trained
operatives
Calibrated, tested and
efficient technology
1 4 4
Work at a Height 5 5 25 Proper protective measures 1 4 4

8
Running head: ADVANCED TECHNOLOGY REPORT
through utilizing tested and
calibrated equipment
Approval from designing
engineer
Equipment and tools
tethered
Control over falling objects
from height
Noise 2 4 8 Ear protection areas should
be mandatory
1 5 5
Fumes & Dust 4 4 16 Application of dust
suppression techniques
Additional PPE
Trained operatives
Dust Extraction
1 4 4

9
Running head: ADVANCED TECHNOLOGY REPORT
WBS
Figure 2: Work Breakdown Structure
(Source: Created by Author)

10
Running head: ADVANCED TECHNOLOGY REPORT
Gantt Chart
Figure 3: Gantt Chart
(Source: Created by Author)

11
Running head: ADVANCED TECHNOLOGY REPORT
Network Diagram
1.
2.
3.