Professional Engineering: Summary Statement Competency

This document provides a detailed summary of professional engineering competencies, covering knowledge and skill base (PE1), engineering application ability (PE2), and professional and personal attributes (PE3). The summary outlines how the student has applied these elements through various career episodes, referencing specific paragraph numbers within each episode. PE1 focuses on the understanding of engineering fundamentals, mathematics, specialist knowledge, and contextual factors. PE2 emphasizes the application of engineering methods, techniques, and systematic design processes. Finally, PE3 highlights ethical conduct, communication skills, creative demeanor, and effective team membership. The document provides a comprehensive overview of the student's ability to meet the required competencies for professional engineering practice, including examples from practical project work. The document is contributed by a student to be published on the website Desklib. Desklib is a platform which provides all the necessary AI based study tools for students.

Professional Engineering: Summary Statement
Competency Element
A brief summary of how you
have applied the element
Paragraph number in the
career episode(s) where the
element is addressed
PE 1 KNOWLEDGE AND SKILL BASE
PE1.1 Comprehensive,
theory based
understanding of the
underpinning natural and
physical sciences and the
engineering fundamentals
applicable to the
engineering discipline.
1. I conducted research into the
feasibility design of the LFO
farm tank. I observed the
performance of the electrical
generation as well as the
distribution networks.
2. I had conducted the project
work to design a gas leakage
detector and auto dialing
control system which is
capable to detect of gas
leakage.
Career Episode 1: CE 1.2.3,
CE 1.3.1 and CE 1.3.2
Career Episode 2: CE 2.3.1
and CE 2.3.3

3. The report is based on
development of electronically
controlled valves into the
hydraulic systems.
Career Episode 3: CE 3.2.1,
CE 3.3.1 and CE 3.3.2
PE1.2 Conceptual
understanding of the
mathematics, numerical
analysis, statistics, and
computer and
information sciences
which underpin the
engineering discipline.
1. I had analyzed that it
provides with contamination
free liquids. The main motive
behind design of floating
suctions is for long as well as
trouble free life.
2. I had ensured that the alarm
will not switched off until the
level of the gas reaches to its
normal value of around
400ppm.
3. The controlled valve
employed into the hydraulic is
classified as single stage as
well as two stages of valves.
Career Episode 1: CE 1.3.1
Career Episode 2: CE 2.3.2,
CE 2.3.3 and CE 2.3.4
Career Episode 3: CE 3.3.1
PE1.3 In-depth
understanding of
specialist bodies of
1. I had observed that it helps
to increase efficiency and
reduce the maintenance of the
Career Episode 1: CE 1.3.1

knowledge within the
engineering discipline
filter separators.
2. I had determined that MQ-6
sensor is used to detect of gas
leakage detections. This sensor
is composed of AL2O3
ceramic tube in addition to Tin
Dioxide (SnO2) sensitive
layer, measurement of
electrode and also heater are
being fixed into crust which is
made up of plastic as well as
stainless steel.
3. I had determined that the use
of electronically controlled
value allows controlling the
spool position of directional
control that can turn the control
speed of the actuator.
Career Episode 2: CE 2.3.1,
CE 2.3.4, CE 2.2.5 and CE
2.4.2
Career Episode 3: CE 3.3.1,
CE 3.3.3
PE1.4 Discernment of
knowledge development
and research directions
within the engineering
1. I conducted micro
simulations, process modeling
as well as integration into
development of the electronics
Career Episode 1: CE 1.2.5,
CE 1.3.1 and CE 1.4.2

discipline
devices as well as products.
2. I have knowledge to
maintain the safety conditions
during the detection of the gas
as well as measuring of the
vessel are also important.
3. I have utilized my
knowledge of the sensor
technology which is applicable
for desired type of the
measurements such as flow
rate, pressure level,
temperature, position and
motion of the controlled valve.
Career Episode 2: CE 2.3.2,
CE 2.3.4 and CE 2.4.1
Career Episode 3: CE 3.3.2,
CE 3.3.3 and CE 3.4.1
PE1.5 Knowledge of
contextual factors
impacting the engineering
discipline.
1. This tank farm is used for
storage of liquid petroleum
products as well as
petrochemicals into the power
plant.
2. I had used of such type of
controlled valve in order to
control the flow rate towards
Career Episode 1: CE 1.2.1,
CE 1.2.2 and Career Episode
2: CE 2.2.1, CE 2.2.2
Career Episode 3: CE 3.2.1,

the actuator. CE 3.2.2
PE1.6 Understanding of
the scope, principles,
norms, accountabilities
and bounds of
contemporary
engineering practice in
the specific discipline
1. I had also prepared the
material cost required for the
construction and estimated the
time taken for the installation
of the floating suction and
manual level indicator, water
drain pipe and valve.
2. I have checked for the
instruments before I had used it
and records are kept for
checking in addition to faults
found.
Career Episode 1: CE 1.2.3,
CE 1.3.1, CE 1.3.4 and CE
1.3.2
Career Episode 2: CE 2.2.3,
CE 2.3.1 and CE 2.3.2 and
Career Episode 3: CE 3.2.3,
CE 3.3.1 and CE 3.3.2
PE 2 ENGINEERING APPLICATION ABILITY
PE2.1 Application of
established engineering
methods to complex
engineering problem
solving
1. I had also installed of
valve which is the main
part of the construction
work of farm tank. I had
set the valves and sealed it
for functioning at
particular start to discharge
Career Episode 1: CE 1.2.4, CE
1.3.1 and CE 1.4.2 and Career
Episode 2: CE 2.3.3, CE 2.3.4 and
CE 2.4.1, CE 2.4.2 and Career
Episode 3: CE 3.3.1, CE 3.3.2 and
CE 3.4.2

pressure based on the
regulations of the power
plant.
PE2.2 Fluent application
of engineering techniques,
tools and resources.
1. I had installed the valves
into the storage tank helps
to start to discharge the
pressure. Those values are
started to open based on
the pressure.
2. A comparator is used to
compare the leakage of
LPG based on the normal
conditions. Output of the
comparator is being fed
into the microcontroller
and coding LCD is used as
a display for gas leakage.
Career Episode 1: CE 1.3.3, CE
1.3.2 and CE 1.3.1
Career Episode 2: CE 2.3.1, CE
2.3.2 and CE 2.3.3 and Career
Episode 3: CE 3.3.1, CE 3.3.2 and
CE 3.3.3
PE2.3 Application of
systematic engineering
synthesis and design
I had verified the local
codes as pressure rating is
required as some of the
states required of high
Career Episode 1: CE 1.2.3, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.3.3 and

processes.
highest working pressure
vessel.
CE 2.3.4
Career Episode 3: CE 3.2.2
PE2.4 Application of
systematic approaches to
the conduct and
management of
engineering projects
1. I have conducted of
multidiscipline
construction as well as
commissioning of the LFO
farm tank. I have
conducted of piling work
with the hydraulic rotary
rig.
2. I have also monitored
the levels of oxygen into
inlet gases into the tanks. I
have capability to carry out
the project work into wide
ranges of instruments
which are fixed.
3. I had carried out
experiments in order to
calculate the differential
pressure as well as flow
characteristics into the
Career Episode 1: CE 1.3.1 and
CE 1.3.2
Career Episode 2: CE 2.2.3, CE
2.3.1, CE 2.3.2 and CE 2.3.3
Career Episode 3: CE 3.3.1 and
CE 3.3.2

controlled valve.
PE 3 PROFESSIONAL AND PERSONAL ATTRIBUTES
PE3.1 Ethical conduct
and professional
Accountability
Inspection, repair as well
as maintenance of the
system are not properly
done due to not properly
following the rules and
regulations of the
construction work.
Career Episode 1: CE 1.2.3, CE
1.3.3 and CE 1.4.1
Career Episode 2: CE 2.2.3, CE
2.3.5 and CE 2.4.2
Career Episode 3: CE 3.3.3, CE
3.4
PE3.2 Effective oral and
written communication in
professional and lay
domains
1. With help of the team
members, I had prepared
the calibration report so
that we can able finish the
project on time.
2. A comparator is utilized
to look at the leakage of
LPG in view of the typical
conditions. Yield of the
comparator is being
sustained into the
microcontroller and coding
LCD is utilized as a show
Career Episode 1: CE 1.2.3, CE
1.3.3 and CE 1.4.1
Career Episode 2: CE 2.2.3, CE
2.3.5 and CE 2.4.2

for gas leakage.
3. I had analyzed that this
value software allow to
maintain the operations
and monitor control valve
health as well as
performance in order to
develop reliability by spot
the issues before it is going
to affect the business
processes.
Career Episode 3: CE 3.3.3, CE
3.4
PE3.3 Creative,
innovative and pro-active
demeanor
After preparation of the
report, I had sent it to the
supervisor for their
feedback so that on time I
had to make possible
changes.
Career Episode 1: CE 1.3, CE 1.4
and CE 1.4.2 and Career Episode
2: CE 2.3, CE 2.4, CE 2.2.5 and
CE 2.4.2 and Career Episode 3:
CE 3.2, CE 3.3
PE3.4 Professional use
and management of
information
I had also performed the
testing in order to
determine the issues with
the controlled valve
Career Episode 1: CE 1.2.3, CE
1.2.5, CE 1.4.2 and Career
Episode 2: CE 2.2.3, CE 2.2.5, CE
2.4.2 and Career Episode 3: CE

assembly. 3.2.3, CE 3.2.5, CE 3.4.2
PE3.5 Orderly
management of self and
professional conduct
I had prepared a calibration
report and taken advice
from the project supervisor
when I had to use of the
software for value sizing
and other project activities.
Career Episode 1: CE 1.4.2, CE
1.3.1 and CE 1.3.2
Career Episode 2: CE 2.4.2, CE
2.3.2, CE 2.3.3 and CE 2.3.4 and
Career Episode 3: CE 3.4.2, CE
3.3.1 and CE 3.3.2
PE3.6 Effective team
membership and team
leadership
I had used of scheduler to
schedule the time and cost
of the plan so that I cannot
face any type of project
delay issues.
Career Episode 1: CE 1.4.1, CE
1.4.2,
Career Episode 2: CE 2.4.1 and
CE 2.4.2
Career Episode 3: CE 3.4.1 and
CE 3.4.2