Facility Design Project: Executive Summary on Benefits Administration

This report presents an executive summary concerning the administration of new benefits and the management of cost structures within a project organization. The primary goal is to initiate the project with minimal cost while maintaining high proficiency. The selection of a forecasting method is crucial for projecting future demands and guiding the project's development administration system to ensure cost-effective performance. The report emphasizes the application of new technologies to enhance project efficiency and quality, leading to improved project outcomes. Key objectives include optimizing product efficiency through design and layout, diversifying the organizational structure for better project management, and utilizing data related to container production capacities across different flow lines. The design process incorporates 3D drawing software for accurate project visualization, and layout factors such as scalability, flow of movement, material handling, and employee morale are considered to ensure an efficient and effective facility design.

Executive Summary
Preparation regarding the administration of the new benefits that are present in the
administration of the cost structure that is present in the organization of the scheme. This is
one of the main aim that the prosecution of the project organization gets achieved with the
help of the strategy that has been implemented in the action of the entire project. The main
essence of the project organization includes the fact that the commencement of the project
must be reformed with the least cost that can be provided and this is the sole cause that the
elementary administration of the project get completed with high proficiency. Selecting of the
forecasting method was considered as the main aspect that will ensure the fact that the project
administration of the business will get commenced with the assistance of the improved trial of
the estimation of the future which is the main concern in this case. With the help of the
concern that was prosecuted by the development administration system entails the
performance of the project and this is the sole motive that the administration of the project
gets performed with the least cost incurred. This article will also provide a better understanding
of the project which requires application of new technologies as this is considered to be one of
the main reason that the projection of the task gets completed in an efficient manner. This is
the sole reason that the administration of the project gets performed with the help of the
projection of the administration of production of better quality of the project.
The main concern of the project is to check the projection of better administration of
the project. This leads to the datum that the outcome of the plan gets did in a better method.
This is also a foremost aspect that leads to better and efficient performance of the project.

Project Statement
The objectives that are occupied into thought comprises the aspect that the efficiency of
the products are not only dependent on the quality of the product but also the design of
the layout system.
This leads to the aspect that the project that is taken into consideration gets fulfilled and
this is the sole aim that the manufacturing of the scheme gets successful and the
arrangement of the project gets performed in a better manner. Diversifying the
organization structure is as one of the foremost cause that provides better employment
of the project management.
Methodology
1. Data:
The main resultant that are gathered as per the projection of the completion of the
project will include the following the terminologies: -
 The container that is produced will ensure that the containers will contain
3.5 to 6 Gallon in its 1st flow line called "Pail Line". The main essence that is
taken into consideration includes the projection of the 6 gallons pails
 The "Intermediate Line" (2nd flow line) has 2 containers probably 10 and 15
gallon each
 The "Drum Line" (3rd flow line) includes several drums with the capacity of
55 gallons each and two 60 gallon drums

 Material that are used will include the aspect that the probation of the
managerial essence will get commenced with the help if the lithograph
 Silk screened drums are not used for production of the project.
 The co-producers are responsible for the production of the containers and
this is the sole reason that the administration of the project gets performed
with highest efficiency.
 The company makes steel from coils by diversifying it in plates and cutting
the steel plates form the coils
 Introduction of innovation will help in increasing the terminology of the sales
which will directly help the functioning of the project.

2. Drawings
This section is mainly focused on drum drawing and this is the main reason that this
part of the project gets such high efficiency

After completion of the hardware related works the main process that is taken into
consideration is that the project is completed by 3 D drawing making software
 5 Gallons
 55 Gallons

The body, hinge and ring of the drum are shown below:

Forecasting
While the location data is given as below:
Figure 1: Forcasted Demand for 10 Years

Product Design
Process Design
This system has been very efficient in nature and this leads to the fact that the
administration of the project gets performed with highest proficiency as the design
that is drawn provides a better projection of the entire project. As the drawing s that
are implemented are drawn with the help of 3 D software making process. This helps
in better completion of the project and this is the main reason that the project
administration gets performed in a better manner.
The activates that are processed with the help of the various stages of project
commencement as the ball park studies helps in better completion of the project.
Financial Data Analysis

Layout
Factors in Determining Layout and Design:
The factors that are present in determining of the Layout and Design system are as follows: -
1. Scopes of further change and expansion:
The facilities are designed in such a way that they are easily adjusted or expanded. This is to meet
various changes in needs of productions. Though redesigning facilities is a major concern here, the
expensive undertaking cannot be taken easily. There are possibility of redesigning that is needed. Thus,
any design is flexible. The systems of flexible manufacturing consists of largely automated facilities. They
possess intermediate production of volumes of various products. Here, the aim is to minimize the
changes on the setup times to produce various products. These are achieved close to assemble various
lines of single products or rates of productions.
2. Flow of the movement:
The design of facility has been reflecting on identification of significance of various smooth
process flows. At the vase of factory facilities, this plan displays the raw materials that has been
entering the plant at one end. There is also a finished product that has been emerging at others.
It is not mandatory that the flow is straight line. Different u-shaped patterns, parallel flows and
zig-zag has been ending up with various finished products. This is back at the shipping and here
the receiving bays is functional. Besides, the backtracking can be avoided in whatever pattern is
opted for. However, as the materials and parts move against and across the entire flow, paper
works and personnel become confused. The parts becomes lost and the attainment of
coordination turns to complicated.
3. Handling of materials: Various small business owners has been ascertaining that facility has
been making that possible to handle the materials like containers, equipment and products.
4. Needs of output: Here, the facility has been laid in such a way that is becomes conducive for
helping the business meeting the needs of productions.
5. Space utilization: Here, the aspect of facility design has been including many things from
assuring the traffic lines. These are sufficiently wide to assure that inventory storage
warehouses or rooms has used as per the possible vertical space.
6. Shipping and receiving:
The small business owners has been leaving ample space for the aspect of the operations. These
spaces has not been tending to fill that itself up, shipping and receiving. This is to rarely get
enough space for the task to be done effectively. This is mentioned in “How to Run a Small
Business”.
7. Ease of support and communication:
Here, the facilities must be laid out such the communication at different business areas and
interactions with customers and vendor can be done. This can be done effective and easy
manner. In the same way, the supporting sectors are stationed in areas that are helpful to serve
the areas of operations.

8. Effect of job satisfaction and employee morale:
Different previous researches has shown that the morale of employees consists of a major effect
on the area of productivity. In many ways the layout design rises the morale that are obvious.
This is to provide the light-colored space, windows and walls. There are other ways that are less
obvious and not related directly to the process of production. Moreover, there are various costs
that are needed to be traded-off. This raises the rise in morale value because of rise of cafeteria
productivity. This is at the extent that rise in productivity covers various costs if staffing and
building of cafeteria.
9. Promotional value:
As the business faces different visitors in the form of investors, vendors and customers, the
small business owners has been assuring that layout of facility has been an attractive one. This
further burnishes the reputations of the companies. There are design factors that are able to
influence the degree of attractiveness of various facility. This has been including the areas of
production design. Besides, it also consists of the effects that has been on the ease of fulfill the
cleaning and maintenance tasks.
10 Safety: This facility has been enabling the business to operate effectively as per the guidelines
of “Occupational Safety and Health Association” and various other restrictions that are legal.
Adding factory layout:
The manufacturing and offices facilities has been typically designed in various ways. Here, the reflection
of disparate products has been consisting two entities. This has been making factory producing various
things. These objects are conducted with lifted trucks and conveyors. Further the factory uses the large
amount of powers, waste disposal, compressed air, water and gas. This includes the computer networks
and telephones. Here, a complex layout has been there to minimize the cost of transportation. Besides,
there are mandate of various business offices to create information. This is disseminated in oral
electronic and physical forms. The oral medium comprises of telephone, face-to-face encounters,
computer files, memos, reports and other documents.
Requirements of layouts differing as per industry standards:
Service oriented:
Here, the necessities of service oriented business is often predicated in the whether the customers has
been receiving the services at physical location of business. This also indicates whether the business has
been moving away from place of business and home of customers. In the latter cases, the business has
been having the layouts of facilities. This has been emphasizing space of storage for equipment, paper
works and chemicals. This has been instead of spacious areas of customer waiting.
Manufacturing industry:
They have various layouts of facilities. This has been depending on distinct necessities that they have
been possessing. Besides, the challenges of production related to producing the jars of mountaineering
and varnish tools are different that the creating truck chassis of toys of foam beach.
Retail sector:

The outlets of retails consists of business sector. They have distinct needs of facilities. These
establishments has been emphasizing space of sales flow, inventory logistics, issues of for traffic, store
attractiveness. This is done while studying issues of facility layouts.