Comprehensive Report on Occupational Health and Safety Procedures

This report provides a comprehensive overview of occupational health and safety (OHS) procedures, focusing on plant and equipment safety, as well as the handling of hazardous chemicals. The report details legal requirements, consultation processes, planning and purchasing considerations, and risk identification and assessment related to plant operations. It emphasizes the importance of risk control through elimination, substitution, engineering, administrative controls, and personal protective equipment (PPE). Standard Operating Procedures (SOPs) are highlighted as crucial for alerting staff and operators to plant hazards. The report also covers plant installation, inspection, maintenance, and registration. Furthermore, it addresses licensing, competency certificates, and the provision of information, training, and instruction. The second part of the report focuses on hazardous chemicals, including the establishment of a chemical register, the use of Safety Data Sheets (SDS), procurement procedures, risk assessment, safe work procedures, and the control of risks. The report also covers exposure standards, atmospheric monitoring, health surveillance, labeling, storage, disposal, and emergency procedures for hazardous chemicals.

Occupational health and safety procedures 1
OCCUPATIONAL HEALTH AND SAFETY PROCEDURES
By (Name)
Course
Tutor
University
City
Date

Occupational health and safety procedures 2
1. HEALTH AND SAFETY PROCEDURES FOR PLANTS AND EQUIPMENT
1.1 Definitions
A plant is any machinery used for processing materials by means of mechanical action which
could either be through; drilling, punching, mixing, cutting, assembling and molding
(Richardson, 2013).
Hazard refers to the possibility of an illness or injury arising out of the effects of a plant.
Potential harms include; crushing by tipping over of plant or moving objects, burns out of
friction, and injury by fluids of high pressure, being electrocuted, explosions and cuts by
flying/sharp objects (Collins, et al., 2014).
1.2 legal requirements
In Australia, any organization or institution seeking to install operation plants must comply to all
guidelines outlined by Part 4, Division 3 of the Occupational Safety and Health Regulations
(1996), later amended in 1999 December, the Occupational Safety and Health Act of 1984 later
amended in 1999 March, related Australian standards, codes of guidance and Practice and all
appropriate laws pertinent to plant operation.
1.3 Consultation
A health and safety representative of the designated work group should be consulted by the
organization seeking to install a plant (Jeynes, 2007). It is also the duty of purchasers to maintain
consistent contact with sellers to pave way for discussions on health and safety issues related to
plant before plans to introduce a modified or new plant and subsequently allow for any changes
possible.

Occupational health and safety procedures 3
1.4 planning and purchasing
It is the duty of suppliers to provide relevant information related to the use of the plant and
equipment (Hughes & Ferrett, 2009). During the designing, purchasing and planning stages,
controls for substitution, engineering and Elimination can be effectively applied. Whenever any
organization or institution is intending to buy any plant and equipment, all the risks that could
emanate from the risk of the specific plant and equipment must be put into consideration.
1.5 Risk identification
All hazards that could emanate from erection, commissioning, use of plant and systems of work
(SoWs), and installation of plant must be identified by sections, schools, departments and/or
offices of facilities’ management that are aiming to purchase and install a plant and equipment
(Appendix 1,2) (Scheule & Rösch, 2010). Considerations must be given to the following when
identifying hazards of plants:
 Crushing by plant tipping over or by moving or falling objects
 Entanglement leading to injury
 Burns due to friction
 Crushing when people are thrown under or off the plant
 Piercing or cutting by flying or sharp objects
 Suffocation
 High-pressure fluids injuries
 Explosion injuries
 Radiation, vibration, dust, noise
 Falls and slips trips

Occupational health and safety procedures 4
 High temperatures
 suffocation
1.6 risk assessment
Upon identification of risks associable with a plant, a Plant Hazard identification checklist
(Appendix 2) could be used hand in hand with the specific organization/institution’s procedures
of safety risk management (Rausand, 2013). Identified hazards play a crucial role in categorizing
the risks into either low, medium or high priority.
1.7 Risk Control
As mentioned in the regulations of any organization/ institution, in relation to control of risks, it
is the primary role of departments, sections, schools and supervisors to identify and eliminate or
help in eliminating any risk whenever practicable, associable with systems of work and
associable with a plant. For all the risks identified, implementation of controls must be too as far
as possible. The hierarchy of controls must be followed at all times. It involves; elimination,
substitution, engineering, administrative, and PPE (Personal Protective Equipment) (Holloway,
et al., 2012).
1.8 (SOPs) Standard Operating Procedures
Development of a standard operating procedure will follow the assessment of risk identification
and control measures. The SOPs are to be displayed near or on the plant and should be followed
to alert students, staff and operators of all the hazards associated with the plant (Sutton, 2017).
1.9 installation, Erection, and commissioning of the plant

Occupational health and safety procedures 5
Sections, departments, schools, supervisors, and facility/institution management offices and/or
other coordinators of plant installation and management must complete Appendix 2 so as to;
 Ensure that egress and access from and to the workplace are not affected by the plant's
layout.
 Ensure that a clear working area has been provided around the plant.
 Incorporate inspections to ensure that monitoring of risks associable to the operation of
the plant is conducted.
 Ensure that the operation of a plant has not commenced until the establishment of the
commissioning process is done (Helmus, 2008).
1.10 Inspection and Maintenance for Plant in Use
Recommendations of the supplier, designer, and manufacturer should be followed in the
maintenance, cleaning, and inspection of the plant. All warning devices and safety features
should be regularly tested (Richardson, 2013). Before the onset of repairs, maintenance or
cleaning, stopping of the plant should be recommended by the systems of work (SOP). Devices
for lockout or isolation should also be used.
1.11 Registration of Plant
Unless registered with Work safe WA, there are certain plant items not usable in the workplace
as ruled by the Occupational Safety and Health Regulation of 1996. They are;
 Tower cranes
 Maintenance units for building
 Gas cylinders
 Boilers of hazard categories A, B, C.

Occupational health and safety procedures 6
 Pressure vessels of hazard levels A, B, C other than pressure pipes, LPG fuel vessels, and
gas cylinders.
 Elevating work platforms of boom type.
 Bridge cranes with a working load of more than 10 tons.
1.12 Licensing and Certificate of Competency
A competency certificate is compulsory for anyone using or operating high-risk plant items.
Departments, schools, supervisors or section personnel must see to it that their staff are in
possession of competency certificates for the plant that they operate. Working under the close
supervision of a professional with the relevant certificate of competency is an alternative way for
individuals to gain the necessary training.
1.13 Information, Training, and Instruction
Under the Occupational Health and Safety Act, it is a requirement that organizations or
institutions in possession of plant and equipment to avail instruction, training and information to
employees to ensure that they are in a capacity to perform work free from health risks and in a
safe manner. upon identification of hazards related to a plant and its systems of work and
subsequent assessment warranting it to be a risk, it is upon the employer to ensure that such
employees with the highest likelihood of exposure to the risk and any supervisor of such
employees must be trained and given relevant instructions and information (Smedley, et al.,
2013).
2. HEALTH AND SAFETY PROCEDURES FOR HAZARDOUS CHEMICALS
2.1 Establishment/ reviewing of Chemical Register

Occupational health and safety procedures 7
All details of hazardous chemicals that are handled or stored in the workplace should be fed into
a chemical register with the supervision of the workplace manager. Reviewing the chemical
register is to be done when additional or new chemicals are brought into the workplace, risk
controls have altered or are no longer functional (Kolk, et al., 2011).
2.2 Safety Data Sheets Obtaining
A hard copy collection of the current SDS (Safety Data Sheet) from the supplier or manufacturer
should be obtained and maintained with the oversight of the workplace manager. Authorized
versions of the SDS prepared by the manufacturer must be obtained for each chemical (Pohanish,
2011). In cases where the first supplier or the manufacturer has not yet availed an SDS, copies
can be acquired from GoldFFx.
2.3 Procurement of Hazardous Chemicals
Working in consultation with employees and the Health and Safety Representatives (HSR), a
workplace manager is to ensure that SDS from manufacturers are first obtained before any new
hazardous chemical is established in the workplace. The OHS purchasing checklist should also
be completed. It is from the SDS that it can be determined whether a chemical can be safely
introduced in the workplace (Dikshith, 2013).
2.4 Assessing risks of, and safe work procedures in the handling and storage of
hazardous chemicals
As identified in the chemical register, handling of such hazardous chemicals with extreme or
high-risk rating should be filled in a safe Work Procedure Template which will include directions
for their handling and storage. Reviewing of SDS should be first done to determine whether the
organization/institution is in a capacity to meet the storage and handling requirements.

Occupational health and safety procedures 8
2.5 Assessment of risk in preparation of hazardous chemicals
A risk assessment should be conducted using the risk assessment template or its equivalent with
the oversight of the workplace manager working together with employees and the HSR (Selin,
2010). Employees should be incorporated in this process because it is them tasked with the duty
of preparation of hazardous chemical mixtures.
2.6 Assessment of risks of conducting science experiments
The management OHS nominee and/or the workplace manager should ensure that science
teacher and/or science coordinators use the Risk Assessment Template or its equivalent to assess
risk prior to conducting any new or previously performed experiments. Laboratory technicians
are to ensure that prior to preparing chemicals usable in science experiments, assessment of risks
have been conducted.
2.7 Control of risks associable to hazardous chemicals and their mixtures
Risks that could emanate from hazardous chemicals and their mixtures should be reduced to as
far as it is practicable. This can be achieved by following the guidelines provided in the SDS
from manufacturers and with the oversight of the workplace manager in consultation with
employees and the HSR.
2.8 Standards of exposure and atmospheric monitoring
It is the duty of any workplace manager to ensure that no employee is exposed to concentrations
in the atmosphere from any substance that is beyond the exposure standard of the chemical in
question (McDermott, 2014). Atmospheric monitoring could be conducted to determine the

Occupational health and safety procedures 9
presence or absence of health risks in instances where uncertainty regarding the exposure
standard.
2.9 Health surveillance
The management OHS nominee and/or the workplace manager must work in reference to the
applicable SDS for the hazardous chemical in question to evaluate such chemicals and
subsequently coin the decontamination procedures in case any employee is exposed to the
hazardous chemical while in the workplace.
2.10 Labeling of hazardous chemicals
All hazardous chemicals in the workplace must be stored in containers that are clearly labeled
with the oversight of the Management OHS nominee or the workplace manager. Labels on the
container containing hazardous chemicals must remain unaltered, intact and legible (Boss, et al.,
2015). Decanted chemical mixtures, as well as chemical mixtures, are clearly labeled unless they
are used immediately after preparation. Containers used for decantation must be fit for holding
the contents and preferably be of the recommended type.
2.11 Storage of hazardous chemicals
The management OHS nominee if present at the workplace must work in partnership with the
workplace manager to ensure that the chemicals are stored in accordance with the storage
guidelines provided by the manufacturer or supplier.
2.12 Disposal of chemicals and chemical waste
It is the duty of the workplace manager to ensure that hazardous chemical waste is packaged in
the right manner, branded and stockpiled in designated areas that are most suitable before they

Occupational health and safety procedures 10
are collected for disposal (Armour, 2016). As per the SDS, Personal Protective Equipment must
be used when handling waste. The aforementioned personnel must also ensure that chemical
waste formed at the workplace is put in containers that are labeled appropriately for
identification purposes.
2.13 Emergency procedures
For the purposes of implementation in case of a chemical emergency, emergency management
provisions should be made available by the workplace manager working in partnership with
employees and the HSR. Common management provisions include;
 First aid kits
 Emergency showers, eye wash kits, eyewash stations
 Fire extinguishers and other firefighting materials
 Containment equipment and spill kits
 Effective toll-free numbers of trained first aiders and emergency wardens
2.14 Training, information, and consultation
Workplace manager should ensure that consultation arrangements are in place for consultations
with employees and HSR. Consultation is to be done;
 When introducing new chemicals in the workplace
 When developing safe work procedures
 Making training and induction decisions
 When conducting assessments and identification of risks associable to chemicals present
in the workplace (Kolk, et al., 2011).
 When making decisions relating to control measures implementable

Occupational health and safety procedures 11
Training and provision of information should be conducted to ensure that employees are clearly
aware of what they are handling and the imminent dangers.
2.15 Record keeping
The following documents should be maintained with the oversight of the Workplace Manager in
relation to hazardous chemicals in the workplace;
 Assessments of risk
 Procedures for safe work
 Records of purchases
 Records of training
 SDS and chemical registers
 Records of consultation
 Records of health surveillance and atmospheric monitoring
 Records of testing and inspection of engineering controls
3. HEALTH AND SAFETY PROCEDURES FOR FITNESS FOR WORK
3.1 Purpose
It is a requirement for all workers present at the workplace to be fit and in a capacity to safely
perform their duties in a competent manner without putting themselves and those around them at
risk (Palmer, et al., 2013). Support, communication, testing and/or assessment are some of the
factors that could be considered while determining fitness for work.
3.2 Scope
This procedure is applicable to all workers of an organization irrespective of their positional
mandate. This procedure is also applicable to all locations of an organization or whatever other

Occupational health and safety procedures 12
location outside the organization that the organization's work could be ongoing. During site
induction, external contractors are to be made aware of this procedure.
3.3 Procedure statement
It is the work of this procedure to;
a) Ascertain that the organization adheres to its obligations to volunteers, contractors,
employees, and the general public.
b) Minimize risks and subsequently provide a safe working surrounding.
c) Use educational, preventive and rehabilitative measures to aid in overcoming drugs and
alcohol problems.
d) Ensure fair handling of people who are deemed unfit for work due to use of drugs and
alcohol.
e) See to it that the Employee Assistance Program amongst other service providers can offer
professional and confidential help on issues relating to drugs and alcohol (Howard,
2007).
3.4 Definitions
The following terms will be sighted occasionally throughout the fitness for work procedure;
 Alcohol – ethanol, ethyl or alcohol.
 Appointed person – an individual appointed by the human resources coordinator to
oversee the testing program.
 Approved medication – non-prescription and prescription drugs that can be legally
purchased within Australia