Internet of Things (IoT) Smart Office Setup using Packet Tracer

Desklib provides solved assignments and past papers to help students succeed.

INTERNET OF THING ASSESSMENT ITEM 2 - PACKET TRACER REMOTE IOT
SMART OFFICE

Introduction:
IoT is the system that interrelated with the computing devices and digital machines. It also
interrelated with the devices which can easily provide the identifiers and it has a capability
through which it can easily transfer data to the other network. It consists of the smart devices that
is web-enabled which can be used as the embedded processors or it can used to send or collect
the data from one network to another. The use of IoT makes the work smarter, it can be used in
the many industries like healthcare, finance, etc.
This report is based on set up of the smart office by implementing the IoT devices. In this report,
there is the discussion of connection of several devices and their functioning to set up the office
affiliated with the applications of IoT. It includes the proper steps with proper screenshots. It
uses the smart technology through which the devices like detector of carbon dioxide, detector for
wind speed, tablet devices, etc. can be easily connect and make the easy network. This can
provide the description of all devices and the manner in which they connect through wireless
router with the modem.
Figure 1 Internet of things
(Source: Chorney, 2019)

Part-I
Task-1:
Figure 2 Server
 Adding Registration Server at organization.
 It is connected to ISP.
 Smart IoT devices will get registered to this Server.
Figure 3: IP configuration

 Configuring the Registration Server.
 Configuring the IPV4 address to this Registration Server with mask length of /8.
 Configuring the DNS server address to “116.68.62.5”
 DNS server will help the user to access the Registration Server by URL.
Figure 4: Registration of server
 Turning ON the services of Registration Server.
 By enabling the services of this Server Smart Devices will get registered to it.
 As shown Username & Password are same as Student ID.
 User need to Sign Up for this.
Figure 5 Wireless router

 Adding Wireless-Router at Organization.
 Wireless Router is directly connected to Cable-Modem.
 This connectivity will provide the Wireless access to Smart-Devices.
 Wireless Tablet will also get connected to this Wireless Router.
Figure 6 Configuration of wireless router
 As per the requirement configuring the SSID on Wireless Router by: ”Office-Net”.
 Authentication is set to WPA-PSK.
 Pass Phrase is 11668622 (Student ID).
 Encryption method is set to AES.

Figure 7 Wireless tablet
 Adding Wireless Tablet to at office.
 This Wireless Tablet will allow user to login to Registration Server.
 Wireless Tablet will first connect to Wireless Router by SSID.
Figure 8 Configuration of wireless tablet

 As per the requirement configuring the SSID setting on Wireless Tablet.
 SSID is set by name: Office-Net.
 Authentication is set to: WPA-PSK.
 Pass Phrase is: 11668622 (Student ID).
 Encryption method is set to AES.
 Now Tablet is connected to Wireless Router.

TASK-2
 Adding smart IOT devices at organization.
 Also Name has been set as per Requirement (StudentID_Device).
 Added IOT devices are: Smart Window, Smart Ceiling Fan, Smart Lamp, Smart Door,
Smart Garage, Smart Wind Detector etc.
Figure 9 Settings of Wi-Fi
 As per the requirement configuring the SSID setting on Smart-Window.
 SSID is set by name: Office-Net.
 Authentication is set to: WPA-PSK.

 Pass Phrase is: 11668622 (Student ID).
 Encryption method is set to AES.
Figure 10 Settings of remote server
 Activating the Smart-Window on Remote Server.
 Configuring the Remote Server Address to “116.68.62.2”
 Configuring the User Name: 11668622 (Student ID).
 Configuring the Password: 11668622 (Student ID).
 Now device is registered to Remote-Server & would be available to manage.

Figure 11 Configuration of wireless 1st
 As per the requirement configuring the SSID setting on Smart-Door.
 SSID is set by name: Office-Net.
 Authentication is set to: WPA-PSK.
 Pass Phrase is: 11668622 (Student ID).
 Encryption method is set to AES.

Figure 12 Configuration of wireless 2nd
 Activating the Smart-Door on Remote Server.
 Configuring the Remote Server Address to “116.68.62.2”
 Configuring the User Name: 11668622 (Student ID).
 Configuring the Password: 11668622 (Student ID).
 Now device is registered to Remote-Server & would be available to manage.

Figure 13 MAC addressing
 As per the requirement configuring the SSID setting on Smart-Garage.
 SSID is set by name: Office-Net.
 Authentication is set to: WPA-PSK.
 Pass Phrase is: 11668622 (Student ID).
 Encryption method is set to AES.