Mobile and Wireless Network Site Survey, Planning, Deployment Project

This project presents a comprehensive analysis of mobile and wireless network site surveys, focusing on the application of Ekahau Heat Mapper and WiTuners for WLAN deployment and planning. The project begins with an introduction to the significance of site surveys for wireless coverage and explores the functionalities of Ekahau Heat Mapper, a tool used for mapping Wi-Fi coverage areas, including its features like localizing access points and visualizing signal strength. The project then delves into WLAN planning and deployment, describing the role of WiTuners in capturing signal strength and facilitating both user-guided and automated network planning. Screenshots from the site survey using Ekahau Heat Mapper and the planning and deployment of WLAN using WiTuners are provided. The project emphasizes the importance of factors like signal strength, propagation conditions, and interference in deploying WLANs and highlights the benefits of WLANs, such as flexibility, productivity gains, and reduced cabling costs. The project concludes by summarizing the key findings and referencing the sources used.

Mobile and Wireless network

Table of Contents
1. Introduction..........................................................................................................................................1
2. Wi-Fi Site survey performance using Ekahau Heat Mapper..........................................................2
2.1 Description of Ekahau Heat Mapper.........................................................................................2
3. Planning and deployment of WLAN..................................................................................................2
3.1 Description of WiTuners.............................................................................................................2
3.2 Planning wireless network..........................................................................................................3
3.3 Deployment of WLAN.................................................................................................................4
4. Conclusion..........................................................................................................................................14
References...................................................................................................................................................14
1

1. Introduction
The initial task is to performing the site survey for the wireless coverage. It is performed at
the selected floor of a building in Sydney campus. The Site survey of wireless signal coverage at
the Building D will be taken by using Ekahau Heat Mapper software. The WLAN deployment
and planning will be performed by WI tuners. A WI tuner is used to capture the signal strength
from the AP (Access Point) in the environment. The auditing and optimization will be run to
validate the design. The result of the site survey will be shown at the Heat Mapper.
2. Wi-Fi Site survey performance using Ekahau Heat Mapper
2.1 Description of Ekahau Heat Mapper
Ekahau Heat Mapper is mapping tool, used to note the Wi-Fi coverage area. It is also used
for planning the Wi-Fi network. It supports at Microsoft windows and Mac OS (Au, 2010). The
features of Ekahau Heat Mapper.
 Localize entire (AP)Access Points
 Show Wi-Fi coverage on a map
 Discover presented networks
 Identify security surroundings
 It provides the supports for 802.11n.
 Installing Ekahau Heat Mapper at system is simple.
 It requires no cost.
 Free of charge, one-minute install.
Heat Mapper
Heat Mapper is used to represent the data in two dimensional representations. The data is
present in the color format. It is helpful to understand the complex value. It is very simple to use
and provide the accurate result. Heat maps are used to show the RSSI values. This value is taken
from the client or AP perspective. Heat maps are used to show the data rates. This value is taken
from the client or AP perspective. It is also used to show the QOS performance.
2

3. Planning and deployment of WLAN
3.1 Description of WiTuners
The WiTuners is used to take the Wi-Fi signal coverage as site survey. The Wi-Fi signal
coverage site survey is held at floor plan. It collects the data from all Access Pont(AP) at
surroundings . WiTuners accepts the user guided deployment as well as automated green field
planning updating and planning (Kushki, Plataniotis and Venetsanopoulos, 2012). After
launching the wizard, it prompts the user to load a scanned copy of the floor plans, to set the
scale, and to set the overall deployment area surrounding the desired structure. One could attach
the file in the format of JPEG or PDF and also it receives XML files that describe structures and
attenuation values.
The features of WiTuners
 It has the ability to take continues Wi-Fi site survey.
 The screenshots of the images and data are taken during the process of site survey.
 one could do the site survey from anywhere, even at the remote area.
 To detect the rogue AP.
 it has ability support the spectrum analyzer.
 During the site survey of wifi,It enables the wifi professionals to access the WLAN
network.
Benefits of WiTuners
 WiTuners solution requires low cost and provide result accurately at the correct time.
 It is very helpful to maintain the WLAN performance.
 Quick adaptations towards traffic and broadcast effects are assured since the WiTuners
network is ongoing to simulate the actual world Network in expectation of change to
optimization.
3.2 Planning wireless network.
WLAN (Wireless Local Area Network) has the security, high availability, accessibility
and QOS (Quality Of Service) like the Wired users.
Requirements
WLAN systems run both as an adjunct to the existing wired enterprise network within a branch,
specific teleworker, or secured to applications in the, manufacturing, retail industries. WLAN is used to
permit encrypted, secure, authorized communication for the users. To provide the perfect enterprise
3

wireless solution, some of components are needed to work collective. The Mobility Services, Network
unification, Access Points, client devices and Network management.
The WLANs is needed to do the following
 To provide the secure enterprise from unsecured, unauthorized activity.
 To enable the secure and easy network for visiting employees from other sites.
 To block and segment both unauthorized and authorized users.
 To do Guest access, Location Services and voice services.
Earlier planning Steps to implement the WLAN
 Confirm the Industry Need
 Conclude the Coverage range.
 Design Bandwidth Consumption
 Decide the Hardware requirements
 Implement a Site Survey
 Implement Security and Deploy.
3.3 Deployment of WLAN
The WLAN is application key to business processes. To achieve the required
performance, the planning of network deployment is needed. The signal strength, propagation
conditions, data rate and interference is the key factors for deploying the WLAN. The increased
bandwidth and additional access points in the network affect the WLAN performance. Plan for
deployment generation of WLAN.
 note the no of required Access Points
 Take the optimal placements and locations in 3D.
 Set the Power and channel parameter, these are the optimal settings.
 Estimated performance metrics in call capacity and in Mb/s
Benefits of WLAN
 It has flexibility, productivity gain, less cabling costs and convenience to work.
 It is collaborated easily.
 The errors are reduced.
 To set up the temporary spaces are easy.
 It provides the developed performance, security, efficiency and business resilience.
Screenshots for wifi site survey using Ekahau Heat Mapper
4

 Download the Ekahau Heat Mapper from the online. The Ekahau Heat Mapper is
supported only for windows and MACOS.
 Save the downloaded file at the required location.
 After saving, click Run command and press next.
 Press I Agree and install.
 Click finish.
 Select I have a map image.
 choose the floor plan image file from drive, the image file may be in the format of JPEG
and PDF.
 If one could need screenshot of this site survey during the process, click take screenshot
option.
5

6

7

8

This image show the selected AP signal strength.The default signal strength is displayed for
strongest AP.to show all the AP signal strength,select access point.
9

This figure shows the signal range.
 1-displays the signal strength -65.
 2-displays high signal strength.
 3-displays low signal strength.
10

Screenshots for Planning and deployment of WLAN
WLAN plan for creating the high capacity signal.
It shows the configuration and placement AP (Access Point)of all floors in sydney campus.
11