Network Design Research Report: IP Addressing and Routing
VerifiedAdded on 2025/06/23
|3
|554
|328
AI Summary
Desklib provides solved assignments and past papers to help students succeed.

Network Design
Paraphrase This Document
Need a fresh take? Get an instant paraphrase of this document with our AI Paraphraser

Research Network Design –
Many researchers like theory of graph, design of algorithms, theory of information are involved
in computer science in which Network Design is one of the important energetic research regions.
In this many features are working on networking design such as routing, construction,
deployment, IP addressing, Ad hoc, wireless networking etc.
Most networks have encountered an IP addressing scheme on its place in which to analysis and
optimize IP based addressing scheme with fault tolerance and networking performance. In this
scheme of IP addressing various types of piece of equipments are included such as window NT,
windows 2000, windows XP, and windows servers. In this addressing router, printers and
switches are not mentioned. Every system on the network has an internet protocol address and it
is in the type of 32 bit (4 byte) number. IP address is a foundation of networking service in which
it provides all user services and all another network with the foundation but without foundation it
will not interact with other network and also user services.
IP routing is a procedure of packets which sends packets from one start point to another end point that
point is host on a network to host on an another remote network. This whole process is done by the IP
router. In the networking design IP router observe to establish the address of next hop, to establish
promote the packet and also to check the end point IP address of the packet. In the IP routing, three
various methods are defined (Murhammer, 2019).
1. Using Routing with dynamic
2. Using Routing with statics
3. Connected with subnets
Stating routing is that process in which many routes are added in routing chart and dynamic
routing is that in which the routes to the present state are adjusted automatically in the routing
chart. Connected with subnets is the method in which all the packets are sent towards the next
single hop or router. The most appropriate method is using routing with static because to
understand of the network static routing is very easy and also simple to make and implement
( Study-ccna. 2019).
Internetworking device is used within networks for hardware which is connected with the many various
network resources. Internetworking device obtain their own network configuration in which key are
required like bridge, gateway and repeaters. To connect two huge networks for providing various
services of network is done by bridge. To generate the information is done by repeaters and gateway is
used for internetworking devices to change the structure of network structural design. Protocol for
transferring the information is very level of performance to transfer the data and it is defined by
transferring a large amount of data set over high speed and wide area of network. Transferring protocol
of the data is used to replace and control the files and information over a Internet protocol which is
based on network devices. It is a also depended on client and server architecture and it is used
separately data connection with the client and server sides (Kshirsagar, 2015).
Many researchers like theory of graph, design of algorithms, theory of information are involved
in computer science in which Network Design is one of the important energetic research regions.
In this many features are working on networking design such as routing, construction,
deployment, IP addressing, Ad hoc, wireless networking etc.
Most networks have encountered an IP addressing scheme on its place in which to analysis and
optimize IP based addressing scheme with fault tolerance and networking performance. In this
scheme of IP addressing various types of piece of equipments are included such as window NT,
windows 2000, windows XP, and windows servers. In this addressing router, printers and
switches are not mentioned. Every system on the network has an internet protocol address and it
is in the type of 32 bit (4 byte) number. IP address is a foundation of networking service in which
it provides all user services and all another network with the foundation but without foundation it
will not interact with other network and also user services.
IP routing is a procedure of packets which sends packets from one start point to another end point that
point is host on a network to host on an another remote network. This whole process is done by the IP
router. In the networking design IP router observe to establish the address of next hop, to establish
promote the packet and also to check the end point IP address of the packet. In the IP routing, three
various methods are defined (Murhammer, 2019).
1. Using Routing with dynamic
2. Using Routing with statics
3. Connected with subnets
Stating routing is that process in which many routes are added in routing chart and dynamic
routing is that in which the routes to the present state are adjusted automatically in the routing
chart. Connected with subnets is the method in which all the packets are sent towards the next
single hop or router. The most appropriate method is using routing with static because to
understand of the network static routing is very easy and also simple to make and implement
( Study-ccna. 2019).
Internetworking device is used within networks for hardware which is connected with the many various
network resources. Internetworking device obtain their own network configuration in which key are
required like bridge, gateway and repeaters. To connect two huge networks for providing various
services of network is done by bridge. To generate the information is done by repeaters and gateway is
used for internetworking devices to change the structure of network structural design. Protocol for
transferring the information is very level of performance to transfer the data and it is defined by
transferring a large amount of data set over high speed and wide area of network. Transferring protocol
of the data is used to replace and control the files and information over a Internet protocol which is
based on network devices. It is a also depended on client and server architecture and it is used
separately data connection with the client and server sides (Kshirsagar, 2015).

Reference:
Study-ccna. (2019). What is IP routing?. Retrieved 3 September 2019, from https://study-
ccna.com/what-is-ip-routing/
Murhammer, M. (2019). Retrieved 3 September 2019, from
http://www.cs.tau.ac.il/~eddiea/networkshop/IP-design.pdf
Kshirsagar, M., & Joshi, A. (2015). U.S. Patent No. 9,106,617. Washington, DC: U.S. Patent and
Trademark Office.
Study-ccna. (2019). What is IP routing?. Retrieved 3 September 2019, from https://study-
ccna.com/what-is-ip-routing/
Murhammer, M. (2019). Retrieved 3 September 2019, from
http://www.cs.tau.ac.il/~eddiea/networkshop/IP-design.pdf
Kshirsagar, M., & Joshi, A. (2015). U.S. Patent No. 9,106,617. Washington, DC: U.S. Patent and
Trademark Office.
⊘ This is a preview!⊘
Do you want full access?
Subscribe today to unlock all pages.

Trusted by 1+ million students worldwide
1 out of 3
Related Documents

Your All-in-One AI-Powered Toolkit for Academic Success.
+13062052269
info@desklib.com
Available 24*7 on WhatsApp / Email
Unlock your academic potential
Copyright © 2020–2025 A2Z Services. All Rights Reserved. Developed and managed by ZUCOL.