Prefabrication Tech Transfer: Analyzing Impact on UK Economy & Culture

This essay examines the hypothesis that the transfer of prefabrication technology significantly impacts the economy, government, and culture of both the transferring and receiving nations, specifically focusing on the United Kingdom. It identifies the growing demand for fast and affordable constru...Read More

PREFABRICATION
Student Name
Course
Instructor
Institution
Location
Date

Prefabrication
Hypothesis
“It is possible for the transfer of technology to affect economy, government as well as the
cultures of the receiving and transferring nations. In fact so many dilemmas are opened through
it”
The technology of prefabrication will continue growing in the UK as the demand for fast
affordable systems increases. It is important to note that the technology transfer involving pre-
fabrication alongside digital tools and materials can potentially affect the environment, culture
and finally receiving the negativity of the country. Several risks are associated with the
prefabrication technology transfer. In some cases the host country may be lacking the required
infrastructure or just the professional prowess in accepting it .These negative effects ranges from
environmental, social and or economical.
Possible Objectives of Dissertation
 To find out how much cost and time does a prefabricated structure needs to be erected as
compared to the erection technique of conventional structures
 To comprehensively study the impacts of prefabrication on the social platforms such as
loss of jobs, architecture of vernacular among others.
 To analyses the possible consequences to the environment the prefabrication introduction
 To study the limitation of prefabrication technology in the context of the UK(Ogunbiyi,
Goulding, and Oladapo 2014.).

REFERENCES
Alazzaz, F. and Whyte, A., 2014. Uptake of off-site construction: benefit and future
application. International Journal of Civil and Environmental Engineering, 8(12), pp.1219-1223.
Arashpour, M., Bai, Y., Aranda-mena, G., Bab-Hadiashar, A., Hosseini, R. and Kalutara, P.,
2017. Optimizing decisions in advanced manufacturing of prefabricated products: Theorizing
supply chain configurations in off-site construction. Automation in Construction, 84, pp.146-153.
Azman, M.N.A., Ahamad, M.S.S. and Hussin, W.M.A.W., 2012. Comparative study on
prefabrication construction process. International surveying research journal, 2(1), pp.45-58.
.Boafo, F., Kim, J.H. and Kim, J.T., 2016. Performance of modular prefabricated architecture:
case study-based review and future pathways. Sustainability, 8(6), p.558.
Chai, H., Zhang, L. and Yuan, P.F., 2019, July. Advanced Timber Construction Platform: Multi-
robot System for Timber Structure Design and Prefabrication. In The International Conference
on Computational Design and Robotic Fabrication(pp. 303-311). Springer, Singapore.
Cox, A.G. and Piroozfar, P., 2011, April. Prefabrication as a source for co-creation: An
investigation into potentials for large-scale prefabrication in the UK. In Proceedings of the 6th
Nordic Conference on Construction Economics and Organisation, Copenhagen, Denmark (pp.
13-15).
.Dsouza, R.D., Navin, K.P., Theodoridis, T. and Sharma, P., 2018. Design, fabrication and
testing of a 2 DOF compliant flexural microgripper. Microsystem Technologies, 24(9), pp.3867-
3883.

Eck, B.B.W. and Lichtinger, H., 2018. Gypsum-cement dry mix and prefabricated construction
parts produced therefrom. U.S. Patent Application 15/763,867.
El-Abidi, K.M.A. and Ghazali, F.E.M., 2015. Motivations and limitations of prefabricated
building: An overview. In Applied Mechanics and Materials (Vol. 802, pp. 668-675). Trans Tech
Publications.
Eversmann, Philipp, Fabio Gramazio, and Matthias Kohler. "Robotic prefabrication of timber
structures: towards automated large-scale spatial assembly." Construction Robotics 1, no. 1-4
(2017): 49-60.
Gao, W. and Mao, C., 2017. Assessment on the carbon efficiency in the construction stage: a
comparative study between prefabricated and conventional construction. Modular and Offsite
Construction (MOC) Summit Proceedings, 1(1).
Gorgolewski, M.T., 2008. 12 The potential for prefabrication in UK housing to improve
sustainability. Smart and sustainable built environments, p.121.
Gunawardena, T., Karunaratne, R., Mendis, P. and Ngo, T., 2016, December. Prefabricated
Construction Technologies for the Future of Sri Lanka’s Construction Industry. In Proceedings
of the 7th International Conference on Sustainable Built Environment (ICSBE), Earl’s Regency
Hotel, Kandy, Sri Lanka (pp. 16-18).
Heravi, G. and Firoozi, M., 2017. Production process improvement of buildings’ prefabricated
steel frames using value stream mapping. The International Journal of Advanced Manufacturing
Technology, 89(9-12), pp.3307-3321.

Jaillon, L. and Poon, C.S., 2014. Life cycle design and prefabrication in buildings: A review and
case studies in Hong Kong. Automation in Construction, 39, pp.195-202.
Lehmann, S., 2013. Low carbon construction systems using prefabricated engineered solid wood
panels for urban infill to significantly reduce greenhouse gas emissions. Sustainable Cities and
Society, 6, pp.57-67.
Leiva-Leiva, T., Moya, R. and Navarro-Mora, A., 2018. Model calibration of prefabricated
timber wall frames made of Hieronyma alchorneoides and Gmelina arborea timber using nail and
screw fasteners. Drvna industrija: Znanstveni časopis za pitanja drvne tehnologije, 69(1), pp.3-
12.
Lessing, J., Stehn, L. and Ekholm, A., 2015. Industrialised house-building–development and
conceptual orientation of the field. Construction innovation, 15(3), pp.378-399.
Li, C.Z., Hong, J., Xue, F., Shen, G.Q., Xu, X. and Luo, L., 2016. SWOT analysis and Internet of
Things-enabled platform for prefabrication housing production in Hong Kong. Habitat
International, 57, pp.74-87.
Li, C.Z., Shen, G.Q., Xu, X., Xue, F., Sommer, L. and Luo, L., 2017. Schedule risk modeling in
prefabrication housing production. Journal of cleaner production, 153, pp.692-706.
Li, Z., Shen, G.Q. and Xue, X., 2014. Critical review of the research on the management of
prefabricated construction. Habitat international, 43, pp.240-249.
Loss, C., Piazza, M. and Zandonini, R., 2016. Connections for steel–timber hybrid prefabricated
buildings. Part II: Innovative modular structures. Construction and Building Materials, 122,
pp.796-808.

Lovell, H. and Smith, S.J., 2010. Agencement in housing markets: The case of the UK
construction industry. Geoforum, 41(3), pp.457-468.
Manni, E., Robattino, P.F. and Borotti, L., Betonrossi SpA, 2015. Device for forming concrete
specimens. U.S. Patent 8,985,996.
Mao, C., Shen, Q., Shen, L. and Tang, L., 2013. Comparative study of greenhouse gas emissions
between off-site prefabrication and conventional construction methods: Two case studies of
residential projects. Energy and Buildings, 66, pp.165-176.
Mao, C., Shen, Q., Shen, L. and Tang, L., 2013. Comparative study of greenhouse gas emissions
between off-site prefabrication and conventional construction methods: Two case studies of
residential projects. Energy and Buildings, 66, pp.165-176.
Markström, E., Kitek Kuzman, M., Bystedt, A. and Sandberg, D., 2019. Use of wood products in
multi-storey residential buildings: views of Swedish actors and suggested measures for an
increased use. Wood Material Science & Engineering, pp.1-16.
Martinez, R.G., 2017. Hygrothermal assessment of a prefabricated timber-frame construction
based in hemp. Procedia environmental sciences, 38, pp.729-736.
Mohammad, M., Tourrilhes, J., Coxford, R. and Williamson, M., 2019. Canadian Mass Timber
Demonstration Projects Initiatives. Modular and Offsite Construction (MOC) Summit
Proceedings, pp.51-58.
Murzea, P.F., 2013. THE BEHAVIOR OF AXIAL-SYMMETRIC STRUCTURES AT
SEISMIC MOTIONS CONSIDERING THE VARIETY OF MOTION POSSIBILITIES OF
THE STRUCTURAL ENSEMBLE. Constructii, 14(2), p.25.

Oesterreich, T.D. and Teuteberg, F., 2016. Understanding the implications of digitisation and
automation in the context of Industry 4.0: A triangulation approach and elements of a research
agenda for the construction industry. Computers in Industry, 83, pp.121-139.
Ogunbiyi, O., Goulding, J.S. and Oladapo, A., 2014. An empirical study of the impact of lean
construction techniques on sustainable construction in the UK. Construction innovation, 14(1),
pp.88-107.
O'Neill, D. and Organ, S., 2016. A literature review of the evolution of British prefabricated low-
rise housing. Structural Survey, 34(2), pp.191-214.
Ovando-Vacarezza, G., Lauret-Aguirregabiria, B., Lirola-Pérez, J.M. and Castañeda-Vergara, E.,
2014. Technical Evolution of 3D Modular Construction from the Nineteenth Century to World
War II. In Construction and Building Research (pp. 115-121). Springer, Dordrecht.
Panjehpour, M. and Ali, A.A.A., 2013. A review of prefab home and relevant
issues. Constructii, 14(1), p.53.
Prabhu, P.G., 2016. Study on the Influence of Stakeholders in Construction
Industry. International Journal of Engineering Technology, Management and Applied
Sciences, 4(6), pp.31-45.
Rahman, M.M., 2013. Barriers of implementing modern methods of construction. Journal of
Management in Engineering, 30(1), pp.69-77.
Robeller, C., Konakovic, M.A., Dedijer, M., Pauly, M. and Weinand, Y., 2016. A Double-
Layered Timber Plate Shell-Computational Methods for Assembly, Prefabrication, and
Structural Design. Advances in Architectural Geometry 2016, 5(CONF), pp.104-122.

Saez, P.V., del Río Merino, M., González, A.S.A. and Porras-Amores, C., 2013. Best practice
measures assessment for construction and demolition waste management in building
constructions. Resources, Conservation and Recycling, 75, pp.52-62.
Shi, H., Li, G., Fan, L. and Tong, S., 2018. REVIEW OF AUTOMATIC LIFTING OBSTACLE
DETECTION TECHNOLOGY FOR PREFABRICATED BUILDING PREFABRICATED
COMPONENTS. Bulletin of the Transilvania University of Brasov. Engineering Sciences. Series
I, 11(3), pp.167-174.
Steinhardt, D.A. and Manley, K., 2016. Adoption of prefabricated housing–the role of country
context. Sustainable cities and society, 22, pp.126-135.
Tam, V.W., Fung, I.W., Sing, M.C. and Ogunlana, S.O., 2015. Best practice of prefabrication
implementation in the Hong Kong public and private sectors. Journal of Cleaner
Production, 109, pp.216-231.
Tatlici, G. and Sertyesilisik, B., 2019. Integrating Performance Measurement Systems Into the
Global Lean and Sustainable Construction Supply Chain Management: Enhancing Sustainability
Performance of the Construction Industry. In Ethical and Sustainable Supply Chain Management
in a Global Context (pp. 259-277). IGI Global.
Teodosio, B., Shanaka, K., Baduge, K. and Mendis, P., 2019. An optimized prefabricated raft
footing system for houses on shrink-swell soils: preliminary results. Modular and Offsite
Construction (MOC) Summit Proceedings, pp.59-66.
Varma, C.S. and Palaniappan, S., 2019. Comparision of green building rating schemes used in
North America, Europe and Asia. Habitat International, p.101989.

Verderber S, Jiang S, Hughes G, Xiao Y. The evolving role of evidence-based research in
healthcare facility design competitions. Frontiers of Architectural Research. 2014 Sep 1(3),
pp.238-49.
Vilaitramani, K. and Hirani, D., 2014. Prefabricated construction for mass housing in
Mumbai. International Journal of Innovative Research in Advanced Engineering, 1(9), pp.134-
138.
Vyas, P.D., Kumar, G.V., Raut, A.G. and Kommuri, U.K., 2017, March. Design of miniaturized
dual polarized MIMO antenna. In 2017 International Conference on Nextgen Electronic
Technologies: Silicon to Software (ICNETS2) (pp. 441-446). IEEE.
Willmann, J., Knauss, M., Bonwetsch, T., Apolinarska, A.A., Gramazio, F. and Kohler, M.,
2016. Robotic timber construction—Expanding additive fabrication to new
dimensions. Automation in construction, 61, pp.16-23.
Wong, K.D. and Fan, Q., 2013. Building information modelling (BIM) for sustainable building
design. Facilities, 31(3/4), pp.138-157.
Xin, R.S., An, H.L., Ren, S., Yao, J.T. and Pan, J., 2018. Behaviors of Continuous Cooling
Transformation and Microstructure Evolution of a High Strength Weathering Prefabricated
Building Steel. In Solid State Phenomena (Vol. 279, pp. 21-25). Trans Tech Publications.
Yang, C., Fang, Z., Ning, H., Tao, R., Chen, J., Zhou, Y., Zheng, Z., Yao, R., Wang, L., Peng, J.
and Song, Y., 2017. Amorphous InGaZnO thin film transistor fabricated with printed silver salt
ink source/drain electrodes. Applied Sciences, 7(8), p.844.

Yuan, P.F. and Chai, H., 2017. Robotic wood tectonics. Fabricate: Rethinking Design and
Construction, pp.44-49.
Yuan, P.F. and Wang, X., 2018. From Theory to Praxis: Digital Tools and the New Architectural
Authorship. Architectural Design, 88(6), pp.94-101.
Yunus, R. and Yang, J., 2014. Improving ecological performance of industrialized building
systems in Malaysia. Construction Management and Economics, 32(1-2), pp.183-195.
Zhai, X., Reed, R. and Mills, A., 2014. Factors impeding the offsite production of housing
construction in China: an investigation of current practice. Construction Management and
Economics, 32(1-2), pp.40-52.
Zhang, B. and Meng, S., 2013, November. The dynamic mechanism of liaoning productive
service cluster areas' development and management. In 2013 6th International Conference on
Information Management, Innovation Management and Industrial Engineering (Vol. 2, pp. 607-
610). IEEE.