MN503 - Primary School Network Design with Guest Network Solution
VerifiedAdded on 2023/06/11
|8
|1406
|325
Report
AI Summary
This report details the design of a network solution for a primary school, focusing on dividing the network into subnets to reduce congestion and increase availability. It covers the configuration of network routers according to the school's business rules, hardware and software requirements, and specific configurations for network devices to connect hosts. The report includes an IP address plan, sub-interface configurations for the router, VLAN inter-VLAN routing, and network simulation using Netsim to identify potential errors. Security considerations are addressed through access control lists on a layer three switch to restrict guest user access to the local area network. The design incorporates core, access, and distribution layers, utilizing routers and layer three switches in the core, layer two switches in the access layer, and PCs and servers in the distribution layer. The document concludes with a discussion of new technologies and network protocols relevant to the network framework's development.

Running head: OVERVIEW OF INTERNETWORKING
Assignment 2
Primary School Network Design with Guest Network
Name of the Student
Name of the University
Author’s Note
Assignment 2
Primary School Network Design with Guest Network
Name of the Student
Name of the University
Author’s Note
Paraphrase This Document
Need a fresh take? Get an instant paraphrase of this document with our AI Paraphraser

1
OVERVIEW OF INTERNETWORKING
Table of Contents
Project Scope.........................................................................................................................................2
Network Requirements.........................................................................................................................2
Network Design.....................................................................................................................................3
IP address table.....................................................................................................................................3
Network Topology Diagram...................................................................................................................3
Switch Configuration.........................................................................................................................3
Router Configuration.........................................................................................................................5
DHCP Configuration...........................................................................................................................5
Access Point, Server Configuration Guidelines..................................................................................5
Security Configuration.......................................................................................................................6
Conclusion.............................................................................................................................................6
Bibliography...........................................................................................................................................7
OVERVIEW OF INTERNETWORKING
Table of Contents
Project Scope.........................................................................................................................................2
Network Requirements.........................................................................................................................2
Network Design.....................................................................................................................................3
IP address table.....................................................................................................................................3
Network Topology Diagram...................................................................................................................3
Switch Configuration.........................................................................................................................3
Router Configuration.........................................................................................................................5
DHCP Configuration...........................................................................................................................5
Access Point, Server Configuration Guidelines..................................................................................5
Security Configuration.......................................................................................................................6
Conclusion.............................................................................................................................................6
Bibliography...........................................................................................................................................7

2
OVERVIEW OF INTERNETWORKING
Project Scope
The main scope identified for the development of the network solution for the Primary school are
given below:
To divide the network into different subnet for reducing the congestion in the network and
increase the availability of the network device
To configure the network router device according to the business rules of the school
To identify the hardware and the software requirement for the development of the network
solution.
To list the details the configuration that should be applied in the network device for meeting
the needs of the primary school and connect the host with the network.
To create an IP address plan and follow it for the configuration of the sub interface of the
router and the vlan inter-vlan routing for enabling the host to send and receive data packets
in the network.
To configure the network is simulator software for the identification of the errors in the
project before deploying in the real life environment.
Network Requirements
The main requirement identified for the development of the network solution are given below:
The network should be created with an evaluation on the recent technology and the
network device that can be used for meeting the goals and objectives of the primary school.
A design of the current network should be created in Netsim and presented for the approval
from the stakeholder such that the errors in the project can be identified in the preliminary
stage of the network development.
The security of the network device should be identified and the layer three switch should be
configured with access control list such that the access of the local area network is restricted
for the guest users connected in different vlan.
The floor plan of the building should be analysed for the installed of the network device in
different location of the building and the guidelines of the configuration of the server should
be followed for the configuration of the network device.
The router should be configured with the DHCP configuration for automatically assigning the
range of IP address to the device connected in the vlan.
The cost of the network device should be identified for the calculation of the network
budget and listed for the development of the network solution.
OVERVIEW OF INTERNETWORKING
Project Scope
The main scope identified for the development of the network solution for the Primary school are
given below:
To divide the network into different subnet for reducing the congestion in the network and
increase the availability of the network device
To configure the network router device according to the business rules of the school
To identify the hardware and the software requirement for the development of the network
solution.
To list the details the configuration that should be applied in the network device for meeting
the needs of the primary school and connect the host with the network.
To create an IP address plan and follow it for the configuration of the sub interface of the
router and the vlan inter-vlan routing for enabling the host to send and receive data packets
in the network.
To configure the network is simulator software for the identification of the errors in the
project before deploying in the real life environment.
Network Requirements
The main requirement identified for the development of the network solution are given below:
The network should be created with an evaluation on the recent technology and the
network device that can be used for meeting the goals and objectives of the primary school.
A design of the current network should be created in Netsim and presented for the approval
from the stakeholder such that the errors in the project can be identified in the preliminary
stage of the network development.
The security of the network device should be identified and the layer three switch should be
configured with access control list such that the access of the local area network is restricted
for the guest users connected in different vlan.
The floor plan of the building should be analysed for the installed of the network device in
different location of the building and the guidelines of the configuration of the server should
be followed for the configuration of the network device.
The router should be configured with the DHCP configuration for automatically assigning the
range of IP address to the device connected in the vlan.
The cost of the network device should be identified for the calculation of the network
budget and listed for the development of the network solution.
⊘ This is a preview!⊘
Do you want full access?
Subscribe today to unlock all pages.

Trusted by 1+ million students worldwide

3
OVERVIEW OF INTERNETWORKING
Network Design
IP address table
Subnet
Name
Address Mask Dec Mask Assignable
Range
Broadcast
user 172.30.2.0 /24 255.255.255.0 172.30.2.1 -
172.30.2.254
172.30.2.255
Guest 172.30.3.0 /24 255.255.255.0 172.30.3.1 -
172.30.3.254
172.30.3.255
Server 172.30.1.0 /24 255.255.255.0 172.30.1.1 -
172.30.1.254
172.30.1.255
Network Topology Diagram
Switch Configuration
Core Switch
OVERVIEW OF INTERNETWORKING
Network Design
IP address table
Subnet
Name
Address Mask Dec Mask Assignable
Range
Broadcast
user 172.30.2.0 /24 255.255.255.0 172.30.2.1 -
172.30.2.254
172.30.2.255
Guest 172.30.3.0 /24 255.255.255.0 172.30.3.1 -
172.30.3.254
172.30.3.255
Server 172.30.1.0 /24 255.255.255.0 172.30.1.1 -
172.30.1.254
172.30.1.255
Network Topology Diagram
Switch Configuration
Core Switch
Paraphrase This Document
Need a fresh take? Get an instant paraphrase of this document with our AI Paraphraser

4
OVERVIEW OF INTERNETWORKING
Switch 1
Switch 2
OVERVIEW OF INTERNETWORKING
Switch 1
Switch 2

5
OVERVIEW OF INTERNETWORKING
Router Configuration
DHCP Configuration
Access Point, Server Configuration Guidelines
There are different problem that can arise during the development of the network project and for
eliminating the errors the guidelines should be followed and the network solution should be
developed following the guidelines. Certain assumption should be made for the network design and
they are listed below:
OVERVIEW OF INTERNETWORKING
Router Configuration
DHCP Configuration
Access Point, Server Configuration Guidelines
There are different problem that can arise during the development of the network project and for
eliminating the errors the guidelines should be followed and the network solution should be
developed following the guidelines. Certain assumption should be made for the network design and
they are listed below:
⊘ This is a preview!⊘
Do you want full access?
Subscribe today to unlock all pages.

Trusted by 1+ million students worldwide

6
OVERVIEW OF INTERNETWORKING
There are 50 daily user connected with the local area network of the primary school and 10
guest user that occasionally connect with the network.
The network server and the primary user are separated from each other using different
subnet and vlan such that the security of the network is improved.
The server needs to be configured as file server for sharing of different files with the primary
and the guest user connected in the network.
The guest network should be installed with a wireless router for enabling the guest to
connect their wireless device for enabling the guest to connect their wireless device with the
primary school network.
Security Configuration
For increasing the security of the network the layer three switch should be configured with the
access control list such that guest network is blocked to communicate with the primary user vlan.
The access control list is applied on the vlan interface of the guest network and the security of the
network is maintained. The screenshot of the access list is given below.
Conclusion
From the above report it can be concluded that with the development of the network framework for
the primary school to eliminate the current problem faced by the organization. The router interface
f0/0 is broken done into three sub interface for allocation of the IP address to the three vlan for
connecting the server, primary user and the guest user connected in the network. The IP address is
created and user centric design is created for the development of the network infrastructure. The
design of the network is created by dividing the network into three network component such as core
access and distribution. The router and the layer three switch are added in the core layer and layer
two switch consists of the access layer and for the distribution layer the PC and the server are
connected. A research is done on the new technologies that can be used for designing the network
and the network protocols for the development of the network framework.
OVERVIEW OF INTERNETWORKING
There are 50 daily user connected with the local area network of the primary school and 10
guest user that occasionally connect with the network.
The network server and the primary user are separated from each other using different
subnet and vlan such that the security of the network is improved.
The server needs to be configured as file server for sharing of different files with the primary
and the guest user connected in the network.
The guest network should be installed with a wireless router for enabling the guest to
connect their wireless device for enabling the guest to connect their wireless device with the
primary school network.
Security Configuration
For increasing the security of the network the layer three switch should be configured with the
access control list such that guest network is blocked to communicate with the primary user vlan.
The access control list is applied on the vlan interface of the guest network and the security of the
network is maintained. The screenshot of the access list is given below.
Conclusion
From the above report it can be concluded that with the development of the network framework for
the primary school to eliminate the current problem faced by the organization. The router interface
f0/0 is broken done into three sub interface for allocation of the IP address to the three vlan for
connecting the server, primary user and the guest user connected in the network. The IP address is
created and user centric design is created for the development of the network infrastructure. The
design of the network is created by dividing the network into three network component such as core
access and distribution. The router and the layer three switch are added in the core layer and layer
two switch consists of the access layer and for the distribution layer the PC and the server are
connected. A research is done on the new technologies that can be used for designing the network
and the network protocols for the development of the network framework.
Paraphrase This Document
Need a fresh take? Get an instant paraphrase of this document with our AI Paraphraser

7
OVERVIEW OF INTERNETWORKING
Bibliography
[1]. Atwater, E., Bocovich, C., Hengartner, U. and Goldberg, I. Live Lesson: Netsim: Network
simulation and hacking for high schoolers. In
2017 {USENIX} Workshop on Advances in
Security Education ({ASE} 17). USENIX} Association}., 2017 August.
[2]. Benton, A., Arora, R. and Dredze, M. Learning multiview embeddings of twitter users.
In
Proceedings of the 54th Annual Meeting of the Association for Computational Linguistics
(Volume 2: Short Papers) (Vol. 2, pp. 14-19)., 2016.
[3]. Cuppens, F. WirelessHART NetSIM: A WirelessHART SCADA-Based Wireless Sensor Networks
Simulator. In
Security of Industrial Control Systems and Cyber Physical Systems: First
Workshop, CyberICS 2015 and First Workshop, WOS-CPS 2015 Vienna, Austria, September
21–22, 2015 Revised Selected Papers (Vol. 9588, p. 63). Springer., 2016, June.
[4]. Nayak, P. and Sinha, P. Analysis of Random Way Point and Random Walk Mobility Model for
Reactive Routing Protocols for MANET Using NetSim Simulator. In
Artificial Intelligence,
Modelling and Simulation (AIMS), 2015 3rd International Conference on (pp. 427-432). IEEE.,
2015 December.
[5]. Peng, J., Li, H., Wang, Y. and Chen, J. A web tool for measuring gene semantic similarities by
combining Gene Ontology and gene co-function networks. In
Proceedings of the 6th ACM
Conference on Bioinformatics, Computational Biology and Health Informatics (pp. 678-679).
ACM., 2015 September.
[6]. Saifuddin, K.M., Ahmed, A.S., Reza, K.F., Alam, S.S. and Rahman, S. Performance analysis of
cognitive radio: Netsim viewpoint. In
Electrical Information and Communication Technology
(EICT), 2017 3rd International Conference on (pp. 1-6). IEEE., 2017 December.
[7]. Singh, G. and Singh, H. Performance Evaluation of MANET Routing Protocols using
NETSIM.
i-Manager's Journal on Information Technology,
6(1), p.8., 2016.
[8]. Singh, G., Cheema, A.K. and Kapoor, N. Performance Evaluation of Routing Protocol in
Internet of Things using Netsim.
International Journal,
8(3)., 2017.
OVERVIEW OF INTERNETWORKING
Bibliography
[1]. Atwater, E., Bocovich, C., Hengartner, U. and Goldberg, I. Live Lesson: Netsim: Network
simulation and hacking for high schoolers. In
2017 {USENIX} Workshop on Advances in
Security Education ({ASE} 17). USENIX} Association}., 2017 August.
[2]. Benton, A., Arora, R. and Dredze, M. Learning multiview embeddings of twitter users.
In
Proceedings of the 54th Annual Meeting of the Association for Computational Linguistics
(Volume 2: Short Papers) (Vol. 2, pp. 14-19)., 2016.
[3]. Cuppens, F. WirelessHART NetSIM: A WirelessHART SCADA-Based Wireless Sensor Networks
Simulator. In
Security of Industrial Control Systems and Cyber Physical Systems: First
Workshop, CyberICS 2015 and First Workshop, WOS-CPS 2015 Vienna, Austria, September
21–22, 2015 Revised Selected Papers (Vol. 9588, p. 63). Springer., 2016, June.
[4]. Nayak, P. and Sinha, P. Analysis of Random Way Point and Random Walk Mobility Model for
Reactive Routing Protocols for MANET Using NetSim Simulator. In
Artificial Intelligence,
Modelling and Simulation (AIMS), 2015 3rd International Conference on (pp. 427-432). IEEE.,
2015 December.
[5]. Peng, J., Li, H., Wang, Y. and Chen, J. A web tool for measuring gene semantic similarities by
combining Gene Ontology and gene co-function networks. In
Proceedings of the 6th ACM
Conference on Bioinformatics, Computational Biology and Health Informatics (pp. 678-679).
ACM., 2015 September.
[6]. Saifuddin, K.M., Ahmed, A.S., Reza, K.F., Alam, S.S. and Rahman, S. Performance analysis of
cognitive radio: Netsim viewpoint. In
Electrical Information and Communication Technology
(EICT), 2017 3rd International Conference on (pp. 1-6). IEEE., 2017 December.
[7]. Singh, G. and Singh, H. Performance Evaluation of MANET Routing Protocols using
NETSIM.
i-Manager's Journal on Information Technology,
6(1), p.8., 2016.
[8]. Singh, G., Cheema, A.K. and Kapoor, N. Performance Evaluation of Routing Protocol in
Internet of Things using Netsim.
International Journal,
8(3)., 2017.
1 out of 8
Related Documents

Your All-in-One AI-Powered Toolkit for Academic Success.
+13062052269
info@desklib.com
Available 24*7 on WhatsApp / Email
Unlock your academic potential
Copyright © 2020–2025 A2Z Services. All Rights Reserved. Developed and managed by ZUCOL.