Wireless Network Security Implementation: Windows Server & Kali Linux

This assignment provides a comprehensive guide to implementing wireless network security using Windows Server 2012 and Kali Linux. It covers the configuration of WPA2-PSK, RADIUS, and certificate authority for secure authentication. The assignment details the installation and configuration of MS Windows 2012 Server as a Certificate Authority and RADIUS server, which authenticates wireless clients within an MS Active Directory Domain. It includes setting up the server with specific IP addresses, subnet masks, and DNS settings. The configuration extends to client setup, user and group creation, and the installation of necessary roles and services, such as Active Directory Certificate Services and Network Policy Server. The document guides users through the process of configuring the access point as a RADIUS client, setting up the W7 client as an enterprise wireless LAN client, and modifying RADIUS network settings to aid certificate authentication. The conclusion reiterates the key aspects of the implementation, including the use of brute force password cracking, WEP key discovery, and MAC address monitoring. The document also mentions the use of Kali Linux for penetration testing and ethical hacking techniques.

Table of Contents
1. Introduction................................................................................................................................1
Lab 4-Worksheet................................................................................................................................2
Software....................................................................................................................................11
2. Conclusion.................................................................................................................................14
References.........................................................................................................................................15
1

1. Introduction
The WPA2-PSK will be studied along with the WPA4-way handshake. The brute force
password crack will be used to extract the passphrase. The wireless network traffic will be
collected to find out the WEP key. For doing this action, some software and hardware tools are
required. By using the SSID, the AP WEP configuration will be performed. AP is an access
point. To connect wired LAN into wireless device, AP is used as a hub. It provides secure
connection. The MAC addresses of wireless network will be monitored. For providing the gain
address to the AP, MAC addresses will be predicted. MAC stands for Media Access Control. It
is a unique identifier. It is used for making the communication at the data link layer. The
Microsoft windows 2012 server will be installed. It will perform the authentication in active
directory domain. The client and server configuration of will be done in windows 2012 server
using some software and hardware. To carry out the MAC, address spoofing, WEP and WPA2
encryption, implementation is carried out in Kali Linux. Kali Linux is chosen to carry out the
process since it is easy for handling the encryption and recording, capturing and storing the
traffic. Kali Linux is one of the Linux platform derived based on Debian. Kali Linux is used for
penetration testing. Kali Linux has its host applications like back track, wire shark. Kali Linux
can be easily installed via bootable CD OR DVD. Kali Linux is mostly used for carrying out
forensic activities. Kali Linux has many tools. Some of the tools are wire shark, kismet, Maitego,
Ettercap and many. Kali Linux is also used for Ethical hacking techniques.
Lab 4-Worksheet
Certificate authority is nothing but the one which provides a digital certificate. The digital
certificate can be used to bind an entity’s key cryptographically. The certificate authority is the
one which determines the access of the document or the software or the network by other. The
web browsers are mostly programmed with certificate authorities and providing SSL certificate
comes under the duty of the certificate authority.NPS is the abbreviation of the Network Policy
Server.NPS comes under the role of RADIUS server. RADUS is the abbreviation of Remote
Authentication Dial-in User Service. It is almost similar to that of the IAS service.NPS server
allows you to create wide network access policies. RADIUS server manages three important
roles. The roles are accounting, authentication and authorization.
2

Objective
This activity will cover installing and configuring MS Windows 2012 Server as a
Certificate Authority and Radius Server, which will authenticate wireless clients in an
MS Active Directory Domain.
Hardware
 Computers with recommended hardware for 1 x Windows Server 2012R2 x64 and 1 x
Windows 7 (using virtualization)
 1 x Wireless USB adapter installed to 7 Client
 1 x AP capable of configuring WPA / WPA2 Enterprise (RADIUS)
Software
 MS Windows Server 2012R2
 VM Ware Image: Windows Server 2012R2
 MS Windows 7
Server configuration
This solution has been designed and tested using the following Active Directory configuration:
A single-domain Active Directory forest.
A domain functional level of Windows Server 2012 mode is used.
 Configure the Windows 2012 server with the following:
 IP address: 10.1.x.21 (where x is the number given to you)
 Subnet Mask:255.255.255.0
 Gateway: 10.1.x.1
 DNS: 10.1.x.21
 Disable Netbios over TCP/IP under the Advanced > WINS tab
 Configure the Windows 2012 Server as a Domain Controller
 Use the domain name of arubatrainingX.net.
 Raise the domain functional level to Windows Server 2012mode.
Client configuration
3

 Configure your Windows 7 Client (Wireless adapter) with the following:
 IP address:10.1.x.101(where x is the number given to you)
 Subnet Mask:255.255.255.0
 Gateway: 10.1.x.1
 DNS: 10.1.x.21
 Configure your Windows 7 Client (Ethernet adapter) with the following; (make
sure you have installed your wireless adapter before changing your Ethernet IP
address)
 IP address: 10.1.x.102(where x is the number given to you)
 Subnet Mask:255.255.255.0
 Gateway: 10.1.x.1
 DNS: 10.1.x.21
 Join your client to the domain arubatrainingX.net
 Install your USB Wireless adapter with drivers only.(Use Network and Sharing
Centre)
Creating users and groups
 Create a user called Wireless, passwordPassword1
 Create the groups from the tablebelow
 The following groups are created
1. wireless LAN users
2. Wireless LAN computers
3. Wireless LAN access
4. Wireles LAN Computer Settings
Configuring the certificate
Install the Active Directory Certificate Services role
At the Role Services screen choose Certificate Authority.
Select Enterprise CA and make it a Root CA
Create a New Private Key
4

CA Name =ArubaTrainingX-CA
NPS installation
 On Server1, in the Server Manager list pane, right-click Roles, and then click Add
Roles.
 Install the Network Policy Server role service from the Network Policy and
Access Services role.
 On the Installation Results page, verify that Installation succeeded appears in the
details pane, and then click Close.
 The Network Policy Server role is installed on Server1.
 Do not log off or shut down Server1 at this point.
 Open Network Policy Server from the Administrative Tools menu.
 Using the NPS tool, register NPS in Active Directory.
 The Network Policy server now is registered in Active DirectoryIn the Network
Policy Server management tool list pane, click NPS (Local).
 In the details pane under Standard Configuration, click RADIUS server for802.1X
Wireless or Wired Connections
 Under click RADIUS server for 802.1X Wireless or Wired Connections, click
Configure 802.1X, specify Secure Wireless Connections and accept the default
name.
 In the RADIUS clients dialog box, add your Wireless AP as a RADIUS client
with address of 10.1.x.254.
 In the Shared Secret dialog box, select Manual and specify and confirm the shared
secret no of Password1 and then click OK and Next.
 In the Configure Authentication Methods dialog box, select Microsoft: Protected
EAP (PEAP) click Configure, confirm the Certificate has been issued and click
OK and Next.
 On the Specify User Groups page, add the group Wireless LAN Access and click
Next.
 On the Configure Traffic Controls page, accept the default settings.
5

 Finish the wizard.
 Close the Network Policy Server administrative tool.
 Ensure the Administrator, wireless user accounts are members of the Wireless
LAN Access group.
 Ensure the PC you are logging in from is part of the Wireless LAN Access group
Configuration of a radius client
 Configure the Access Point as a RADIUS Client
 Configure W7Client1as an enterprise Wireless LAN Client
Aiding the certificate authentication by the modification of Radius network
 In the Network Policy Server management tool list pane, click NPS (Local) –
Policies - Network Policy
 Right-Click Secure Wireless Connections.
 From the Constraints tab under Configure Authentication Methods dialog box,
select Microsoft: Protected EAP (PEAP) click Configure, confirm the Certificate
has been issued and click OK and Next.
 Now change the authentication method from Password to Smart of other
certificate by clicking the Add button and choosing the Certificates… option –
then click OK make sure that certificates is at the top.
 Close the Network Policy Server administrative tool
Configuration of W7client
 Open Network and Sharing Centre
 Click on Manage wireless networks
 Modify the existing wireless network profile.
 Click on Change connection settings.
 Click the Security tab
6

 Confirm that the network authentication method is set to Microsoft: Smart card
or other certificates
 If you have successfully connected, disable the Local Area Connection and reboot
your computer and try logging onto the domain using wireless only.
7

8

9

10

Software
 MS Windows Server 2012R2 x64 (Username: Administrator, password: Password1)
 VMWare Image: Windows Server 2012R2 x64
 MS Windows 7
11

12

13

1. Conclusion
The WPA2-PSK would cover the WPA4-way handshake. The brute force password crack
would be used to extract the passphrase. The wireless network traffic would be collected
to find out the WEP key. For doing this action, some software and hardware tools are
required. By using the SSID, the AP WEP configuration would be performed. The MAC
addresses of wireless network would be monitored. For providing the gain address to the
AP, MAC addresses would be predicted. The Microsoft windows 2012 server would be
installed. It would perform the authentication in active directory domain. The client and
server configuration of would be done in windows 2012 server using some software and
hardware.
References
1. Ramachandran, V., & Buchanan, C. Kali Linux wireless penetration testing.
2. Wrightson, T. (2012). Wireless network security. New York: McGraw-Hill
14