logo

BN321 - Advanced Network Design

17 Pages1750 Words35 Views
   

Advanced Network Design (BN321)

   

Added on  2021-10-19

BN321 - Advanced Network Design

   

Advanced Network Design (BN321)

   Added on 2021-10-19

ShareRelated Documents
Running head: ADVANCED NETWORK DESIGN
College Network Design
Name of the Student
Name of the University
Author’s note
BN321 - Advanced Network Design_1
1
ADVANCED NETWORK DESIGN
Table of ContentsProject Scope.........................................................................................................................................2
Detailed Network Diagrams...................................................................................................................2
Project Hardware Requirements...........................................................................................................3
Network Device Configurations.............................................................................................................4
Bibliography.........................................................................................................................................16
BN321 - Advanced Network Design_2
2
ADVANCED NETWORK DESIGN
Project ScopeThe main scope of the project is to create a network solution for the IT college and
accommodate the 400 number of users to access the internet and the following elements creating
the scope are as follows:
To create a proper IP addressing scheme and configuring the device with the Ip address
scheme and keep some of the IP address in reserve for enabling future expansion of the
network.
To connect the LABs in different VLAN such that the network is secured from the external
users and congestion is eliminated for increasing the efficiency of the network.
To analyse the area of coverage of the wireless network and identify the number of wireless
access point needed to be installed for the management of the network framework.
To analyse the current and the future needs of the college for management of the growth of
the campus and accommodate more number of users in the LABs without changing the
current framework of the network.
To identify the industrial standards and specification of the network device that should be
installed in the network for the eliminating different issues for the deployment of the
network framework solution.
To use different VLAN for the voice and data such that there is no lag in the voice
communication due to congestion or collision in the network communication channels
To use appropriate cables for interconnecting the network devices and configure the devices
following the requirement of the organization.
Detailed Network DiagramsThe following network diagram is created based on the two buildings and the number of LABs and
classrooms in each of the building. For the development of the network Cisco packet tracer 7.2 is
used and the devices are configured to create a prototype of the network and enable the network
administrator to identify the errors and the problems faced during the configuration of the network.
BN321 - Advanced Network Design_3
3
ADVANCED NETWORK DESIGN
Project Hardware RequirementsThe hardware that are needed for the development of the network for the IT college are given in the
following table:
Number of device Name of the
Device
Model Series Number of
Ports
3 Cisco 2811 Series
Router
Cisco 2811 series
integrated service
router
2800 Series ISR 1 no. auxiliary
port
1 no. Console
port
2 nos. USB port
8 Cisco Catalyst
WS-C2960S-24TS-
S 24-port
10/100/1000
switch
WS-C2960S-24TS
layer 2 switch
WS-C2960S-24TS-
S
24 nos. LAN
port
7 Cisco IP Phone
7960
CP 7960G 2 Nos RJ 45
ports
Types of cables Used
Name of
Ethernet
Name of Cable Type of cable Maximum
Speed
Distance
100 Base -TX CAT5, CAT5e,
CAT6
UTP 100 Mbps 100 m
01000base T CAT5e, CAT 6 UTP 1Gbps 100 m
1000base – SX Multimode and
single mode
fiber
Fiber 1Gbps 550 m
1000 Base - LX Single mode
fiber
Fiber 1Gbps 550 m for
multimode
fiber and
2000 m for
single
mode fiber
1000 Base - ZX Single mode
fiber
Fiber 1Gbps 70000
meter or
70 km
10G Base - T CAT5e, CAT 6 UTP 10 Gbps 100 m
Servers
Each of the computer labs are installed with a DHCP server and that is used for the
management of the pool of IP address for the PCs installed in the lab and the specification of the
server is given below:
DHCP Server
oProcessor - Intel Core i5 8400 (LGA1151) 8th Generation Processor
oMemory - 8 GB RAM
BN321 - Advanced Network Design_4

End of preview

Want to access all the pages? Upload your documents or become a member.

Related Documents
Internetworking Technologies - PDF
|9
|787
|44

IT Networking Designing
|9
|845
|84

Advanced Network Design Name of the Student Name of the University Authors Note
|21
|3526
|196

Network Design for MyNetworks Company
|13
|896
|270

Computer Networking | Assignment
|14
|1209
|21

Network Requirement Analysis & Plan
|10
|1307
|111