Review Questions OSPF

Review Questions OSPF
1. What Is OSPF Routing Protocol?
The OSPF or the open shortest path first is a type of routing protocol which is
used for an internet protocol network. This protocol utilizes a link state routing
algorithm and resides in interior gateway protocol group.
2. Mention Some Characteristics Of OSPF?
Some of the main characteristics of the OSFP protocol are the:
1. This protocol is a loop-free protocol.
2. This protocol has a maximum of hop metric 65,535.
3. OSFP supports the authentication process by the usage of the passwords.
4. OSFP supports both the IPv6 and the IPv4 protocols.
3. What Is The Need For Dividing The Autonomous System Into Various Areas?
It is essential to divide the autonomous system into various areas as it will
conserve the resources and it will restrict problem propagating in the network by
keeping routing update minimum.
.
4. What Is The Benefit Of Dividing The Entire Network Into Areas?
The main benefit of dividing the network are the:
1. Convergence speed up.
2. Decrement in the routing overhead.
3. Limit network uncertainty to single areas of the network.
5. What Is Backbone Area?
In multi-area OSPF configuration one of the main areas is known as area O. this
area O is considered as the Backbone area. The Backbone area needs to connect
with all other areas.
Page 1 of 6

6. Explain Area Border Router(ABR)?
The ABR is a typical type of router that helps to connect the Backbone areas
with other areas within an autonomous type of system.
7. What Is Autonomous System Border Router (ASBR)?
The router which is able to connect different types of autonomous systems is
considered as the ASBR.
8. What Is OSPF Router ID?
The router ID is useful for the identification of the router. In the loopback
interface of the router, the highest IP is considered as the router ID, when there is
no loopback in the interface physical interface of the router considered as the
router ID.
9. What Parameters Must Match For Two Routers To Become Neighbors?
The following parameters must match between the routers to turn into neighbors:
1. Authentication
2. Area ID
3. Dead and Hello interval time
4. Subnet
10. How OSPF DR & BDR Is Elected?
Page 2 of 6

For a particular router when it achieves the highest importance, it becomes the
DR and the router which achieves the second highest importance become the
BDR. When the two routers tie in the importance, the highest router ID becomes
the DR. In such cases when the router priority is zero it does not participate in
the DR/BDR election.
11. Why DR And BDR Are Elected In OSPF?
With the DR and BDR, all the OSPF router is able to form an adjacency.
Through this adjacency when the link state will be changed it will be only sent to
the DR, thereafter the DR will forward it to all other routers. This will conserve
the bandwidth the reduction of flooding LSAs.
12. Explain The Various OSPF States?
There are total of eight OSFP state:
Down: No Hello packets received at the interface.
Attempt: Applicable for the non-broadcasting multi-access networks.
Init: Hello message received from other OSPF router.
2Way: Bidirectional communication established as the neighbour receives the
Hello message and reply to it by own.
Exstart: Adjacencies established by the DR and BDR in the network with each
of the networks.
Exchange: Link state requests and DBD packets used for exchanging routing
information.
Loading: Neighbor gets link state requests for every network that it does not
know and link state update is sent by the neighbor.
Full: Adjacencies has been established, and the database is synchronised by all
neighbor router.
13. Explain OSPF LSA, LSU and LSR?
LSA: LSAs are used for exchanging topology and routing information.
LSU: The link state update is used for communication as it contains all the link
state advertisement requests by the neighbor.
LSR: The link state request is used for the message requesting when all the link
Page 3 of 6