Network Administration: Web & DNS Server Setup

This assignment focuses on configuring a web server (IIS) and a DNS server within a network. Students are tasked with setting up the default gateway and DNS server automatically via DHCP, creating web pages to display student IDs, and configuring a domain name (group4.com) for accessing the web pages. The document details the step-by-step configuration process for both servers and includes screenshots demonstrating successful implementation.

THE NETWORK DESIGN AND CONFIGURATIONS.
Submitted to
[lecture name]
The Support For Multiple Windows Servers Domains In A Local Area Networks
[Date]
By
[Student name]

Table of Contents
TYPES OF TECHNOLOGIES USED..................................................................................................................................3
THE TECHNOLOGIES IMPLIMENTATIONS.....................................................................................................................3
Creation of two network domains...........................................................................................................................4
Step one: Designing the proposed network.........................................................................................................4
Step two: configuration of the two domains .......................................................................................................4
Authentications for the different users....................................................................................................................6
Step one :open the DHCP server and navigate to the AAA option .......................................................................6
Step two: Enter the admin network configurations and the user set up in the figure above................................7
Step three: Enter the users network configurations and the user set up in the figure above..............................7
Installation of the DHCP server................................................................................................................................8
Step one: Do DHCP server configuration to the admin domain................................................................................8
Step two: configuring the users DHCP server..........................................................................................................8
Step three: Testing g the DHCP server....................................................................................................................10
Installation of the WEB / IIS server........................................................................................................................12
Step one: Adding a network WEB/IIS server.....................................................................................................12
Step two: Opening the config and the HTTP options to create the web pages..................................................12
Installation of the DNS server................................................................................................................................14
Step one :open the WEB server for DNS server configurations...........................................................................14
Step two: open the config and then DNS options to create domain name.........................................................15
Step three: Do the testing of the WEB/IIS server and the DNS server using computer pc1...............................16
References ................................................................................................................................................................18

TYPES OF TECHNOLOGIES USED.
In computing there are a number of technologies that are used to offer various services, however one
of these technologies is the use of the computer network that has various advantages and is used to
facilitate easy communication, sharing of the resources and also easy management of data and sharing of
data.
However this network there are various services that are going to be implemented which will
include hosting and accessing of the websites in the web servers, allocation of the ip addresses to the
network hosts and setting the different authentications of the various network users.
This network will involve a number of technologies which will be implemented in order to offer
those services to the networks users ,these technologies used includes :-
i. Creation of two network domains.
There will be two different network domains which will be set up where one will be allocated to the
users network and the other to the administrator network where each will be configured separately to
enhance the communication.
ii. Authentications for the different users.
This is the process where there will be set privileges to the different users of the network and this will
control the access to the different network domains by the respective users.
iii. Installation of the DHCP server.
This is a special type of server that will be used to ensure any host connected to the network can
effective receives the IP address automatically without any configurations.
iv. Installation of the WEB / IIS server.
The WEB server technology is used to enable the creation and hosting of the web pages on the web
servers and this will ensure the web pages created are accessible by the various clients.
v. Installation of the DNS server.
This is the technology that will enable setting up of the human readable domain names which can be
used to access the web pages from the various hosts instead of using the server IP address.
Therefore for this network to offer all those services all above technologies must be well implemented
as in the section below.
THE TECHNOLOGIES IMPLIMENTATIONS.
This network will be designed and implemented using the above sited technologies which will
eventually enable the usage of the network and offering of the specified services, therefore after the
implementation all the services will be available to the clients.
The network implementation will done by use of the simulations tool called the packet tracer ,and
will be used to design and for testing purpose as well ,however below are the steps used for network
implementation.

Creation of two network domains.
The network is meant to be having two domains where one will be allocated to the users while the
other will be allocated to the administration ,however each domain user will then be set unique
authentication values and conditions [1].
The two domains will be having the respective addresses as summarized in table below.
Domain name Ip address Mask address Default gateway
Admin 10.108.180.0/2
3
255.255.254.0 10.108.180.1
Users 10.109.190.0/2
3
255.255.254.0 10.109.190.1
However the configuration will be done to fit the above values to the respective network domain
using the below steps.
Step one: Designing the proposed network.
The network will be designed using the packet tracer and it will have four sections with three departments
and one administrators’ site as in figure below.
Step two: configuration of the two domains .
The domains will be configured by entering the commands to the CLI section of the router as shown below and set
the ip address for the respective domains .
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>enable

Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa 0/0
Router(config-if)#ip address 10.109.190.1 255.255.254.0
Router(config-if)#exit
Router(config)#int fa 0/1
Router(config-if)#ip address 10.108.180.1 255.255.254.0
Router(config-if)#exit
Router(config)#int fa 0/0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#int fa 0/1
Router(config-if)#no shutdown
Router(config-if)#exit [2].

After configuration of the domains as above then the authentication of the users is set as in below.
Authentications for the different users.
In this network there is need to set the privileges to the various users therefore there will be set
different authentications for the two different groups ,this will involve setting of the user names and the
access password respectively where both will be unique.
Below are steps used to configure the authentications.
Step one :open the DHCP server and navigate to the AAA option .
To enter the settings open the server then choose config menu then under the services select on the
AAA option as below.

Step two: Enter the admin network configurations and the user set up in the figure above.
To set up the authentication of the admin by entering the client names as admin ,client IP as
10.108.180.1 and secret as admin@1234 ,then in the user setup enter the username as admin and password
as admin@1234 and then click the add button as in figure below .
Step three: Enter the users network configurations and the user set up in the figure above.
To set up the authentication of the users by entering the client names as users ,client IP as
10.109.190.1 and secret as users1234 ,then in the user setup enter the username as users and password as
users1234 and then click the add button as in figure below[3] .

Installation of the DHCP server.
The dhcp server is installed to ensure that the devices in the network can easily retrieve the IP addresses
from the DHCP server without manual configurations, however below are the steps followed.
Step one: Do DHCP server configuration to the admin domain.
To enable the configuration of the admin domain to allow the allocation of the ip addresses automatically
the following commands are entered in the router CLI as follows.
Router>enable
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa 0/1
Router(config-if)#ip dhcp pool admin
Router(dhcp-config)#network 10.108.180.0 255.255.254.0
Router(dhcp-config)#default-router 10.108.180.1
Router(dhcp-config)#dns-server 10.108.180.2
Router(dhcp-config)#exit
Step two: configuring the users DHCP server
The DHCP server is configured for the users by first adding the server to the administrators site then
ensure the Ethernet connection is all successfully done as below.
Then the server is opened and the respective IP addresses are set together with the default gateway and
the dns server values which can be done using the below steps.

i. Add the DHCP server to network as below.
ii. Click the DHCP server to open the IP configuration settings and then enter the respective ip addresses
as shown below.

iii. Open the config menu ,then services and then choose the DHCP and enter the addresses as in figure
below and set the services to be on.
Step three: Testing g the DHCP server.
After the configuration of the DHCP server for the both network domains the test is done by
allocating the ip addresses to the computer which is done by clicking computer ,then navigate to the desk
top menus and select the icon called the IP configuration and then choose the DHCP option instead of the
static option to get the results as in the below figures[4].

Therefore the same process is followed until all the devices are allocate their respective ip address
as shown above.

Installation of the WEB / IIS server.
The network will have the ability to store and retrieve the web pages saved by the admin, therefore
the network will be installed with the web server which will be responsible of hosting these web pages.
This webs server will be implemented through the following steps .
Step one: Adding a network WEB/IIS server
The server to be used is added to the admin site and then connection is made to the switches
awaiting the final configurations as below.
Step two: Opening the config and the HTTP options to create the web pages.
In order to create the web pages the user opens the server by moving to the config option ,however
by clicking on the DHCP option the addresses for the default gateway and the dns server are set
automatically from the DHCP server [5].
Then to create the web pages click on the HTTP option in the panel placed on the left side and edit
the web page by entering the details of the students IDS that will be viewed through the web browsers
from the other computer as shown in the figures below.

Installation of the DNS server.
The DNS server is also a very important technology to be used this is because it provides the
domain name which will be used to access the web pages instead of using the ip address ,for this case the
DNS server configuration will be done in the same server machine used to do the WEB server
configuration and the domain name to be used will be group4.com.
Below are the steps followed to do the configurations of the DNS server.
Step one : Open the WEB server for DNS server configurations.
The DNS server will be configured in the same server used for the WEB server ,therefore to open
it just click once and it open ,then choosing the desktop then IP configuration the IP address is retrieved
from the server automatically as in below figures[6].

Step two: open the config and then DNS options to create domain name.
To create the domain name group4.com open the server and under the config menu open the DNS
option then create the domain with name group4.com and the set the ip address as 10.109.190.3 and ensure
the DNS service is on as illustrated in the below figures.

Step three: Do the testing of the WEB/IIS server and the DNS server using computer pc1
To test whether the servers were well configured open the computer pc1 and open the desk top and
then navigate to the web browser icons ,open the browser and key in group4.com on the URL field and
then enter to view the details of the web page through the web browsers as in figures below[7].

Therefore from the above output the web server and the DNS server technology is well
implemented and any host computer in the network can access the web pages using the group4.com link.

References .
[1] A.Thomas,The Practice of System and Network Administration, New York:Addison-Wesley
Professional.
[2] D.Jeff,Routing TCP/IP, London: Cisco Press.,2016.
[3].D.Kevin, Cisco IOS Cookbook, New York: O'Reilly Media,2015.
[4] E.Douglas, Internetworking with TCP/IP Principles, Protocols, and Architecture, New York: Prentice
Hall,2015.
[5] K.James , Computer Networking: A Top-Down Approach, Toronto:Pearson publishers,2014.
[6].L.John,Computer Architecture:A Quantitative Approach,New York:Morgan Kaufmann
publishers ,2015.
[7] S.Andrew,TCP/IP Network Administration Craig Hunt Computer,New Yorj: O'Reilly Media,2014.