Design, Cad Modeling & Fabrication of Automatic Hammering Machine - Career Episode 1

COMPETENCY
DEMONSTRATION REPORT
Career Episode 1

CE 1.1 Project Information
Name of the project: Design, Cad Modeling & Fabrication of Automatic Hammering
Machine
Location of the project: [PLEASE FILL]
Project Duration: [PLEASE FILL]
Organization: [PLEASE FILL]
Role and Designation during the time: Team Leader
CE 1.2 Project Background
CE 1.2.1 Characteristics of the project
Modern industries are looking for the adoption of the technologies that are capable of
meeting the extended needs and requirements of the consumers. Hammering can be stated as the
backbone of the production industries in which it is being used for the mass production through
efficiently completing bulk operations. I considered this section as one of the opportunities to
explore my knowledge and implement my knowledge for introducing a revolutionary product. I
used CATIA (Computer-aided three-dimensional interactive application) v5R20 software for
producing the solid model of the project assembly. I used the components such as motor, shaft,
hammer, jigs, and fixtures for the successful development of the automatic hammering machine.
I tried to implement the automation in the hammering machine that can be helpful in achieving
the real time hammering with much higher accuracy and precision. The proposed system will
eliminate the load bear by the individual during the hammering process and allow the

investigators in the effective and efficient delivery of the necessary operations related to the
hammering. I tried to keep the project budget low as much possible and make sure that the
proposed project is effective and efficient in the end.
CE 1.2.2 Objectives developed for the project
We could not have run into the project blindly, and so, I was asked to lead the team, and
hence, it was one of my responsibility to develop a plan that can be followed for the successful
delivery of the project. I considered the various sectors of the project including technical and
managerial aspects and produced the following set of objectives:
 To determine the torque force and impact velocity of the hammer.
 To analyse the accomplishment time required for delivering certain activities
 To develop the model of the project on CATIA V5R20
 To deploy the automation in the hammering process with minimum workforce
 To estimate the overall cost and keep it low without hampering the overall quality
of the project
 To deliver the project within the defined timeline and make sure that the project
will be provided without any delay
CE 1.2.3 My area of work
My first job was to take the team towards the targeted goals and objectives of the project,
and so, I developed the strategic set of goals that can aim both the technical and management

aspects. I listed the features those needed to be considered while designing the entire model those
could be listed as:
1. Fast Hammering Process
2. Instant Hammering
3. No Manual Effort
4. Low Initial Cost
5. Portable System
6. Low Tooling Cost
7. User Friendly
8. Accurate Repetition and Impact
9. Easy Maintenance
I also analysed some of the existing models for considering the best factors that could be
related to the present research. Moreover, I was also assigned for the mathematical
calculation of the various elements and components those we were using for the delivery of
the project.